When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Атака вірусів або шкідливих програм.
- Застаріла операційна система.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe значок.
2. If the status is set to Не під'єднано, натисніть на Network globe icon, choose your Wi-Fi network and click on З'єднуватися button. Make sure Режим "у літаку не ввімкнено.
3. If you again face the same network connection error code, then click on the Вимкніть button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi Internet, network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Клацніть правою кнопкою миші на Піктограма Wi-Fi і виберіть Open Network & Internet settings.
6. Натисніть на Wi-Fi Internet,.
7. Scroll down the right menu, click on Керування відомими мережами.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Забути.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Спосіб 2: перезавантажте маршрутизатор
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Примітка: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Знайди кнопка харчування на задній панелі маршрутизатора.
2. Натисніть кнопку один раз, щоб вимкнути.
3. Тепер, відключати ваш Router power cable і зачекайте, поки конденсатори повністю вичерпають напругу.
4. Тоді, возз'єднатися силовий кабель і ввімкніть його через хвилину.
5. Зачекайте, доки мережеве з’єднання буде відновлено спробуйте ввійти знову.
Також читайте: Fix Computers Not Showing Up on Network in Windows 10
Спосіб 3: Запустіть засіб усунення несправностей мережі
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Натисніть на ключ для Windows і тип Виправлення неполадок у рядку пошуку та Відкрити.
2. Натисніть на Додаткові засоби усунення несправностей.
3. вибрати Мережевий адаптер і натисніть на Запустіть засіб виправлення неполадок.
4. Select the network adapter to diagnose і натисніть на МАЙБУТНІ.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, натисніть на Закрийте інструмент усунення несправностей.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Також читайте: Виправити проблему сімейного доступу до YouTube TV
Спосіб 4: Відновлення системних файлів
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Засіб перевірки системних файлів) /DISM (Обслуговування і керування зображеннями розгортання) utilities on your Windows 10 PC.
1. Натисніть на ключ для Windows, введіть Командний рядок і натисніть на Запуск від імені адміністратора.
2. Натисніть на Так в Служба захисту користувачів підкажіть.
3 Тип chkdsk C: / f / r / x команда і удар Введіть ключ.
4. If you are prompted with a message, Chkdsk cannot run…the volume is… in use process, then, type Y і вдарив Введіть ключ.
5. Again, type the command: ПФС / SCANNOW і натисніть Введіть ключ для запуску Засіб перевірки системних файлів сканування.
Примітка: A system scan will be initiated and it will take a couple of minutes to finish. Meanwhile, you can continue performing other activities but be mindful of not accidentally closing the window.
After completing the scan, it will show either of these messages:
- Захист ресурсів Windows не виявив порушень цілісності.
- Захист ресурсів Windows не може виконати запитану операцію.
- Захист ресурсів Windows знайшов пошкоджені файли та успішно їх відновив.
- Захист ресурсів Windows виявив пошкоджені файли, але не зміг виправити деякі з них.
6. Once the scan is finished, перезапуск ваш ПК.
7. Again, launch Командний рядок як адміністратор and execute the given commands one after the other:
dism.exe /онлайн /cleanup-image /scanhealth dism.exe /онлайн /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Примітка: You must have a working internet connection to execute DISM commands properly.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Натисніть на ключ для Windows і тип Диспетчер пристроїв in the Windows search menu. Click on відкритий.
2. Розгорніть Мережеві адаптери подвійним клацанням на ньому.
3. Клацніть правою кнопкою миші на вашому Драйвер мережі (наприклад, Intel (R) Dual Band Wireless-AC 3168) і виберіть Вимкнути пристрій варіант.
4. Confirm the below prompt by clicking on Так.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Увімкнути пристрій варіант.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Також читайте: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Перейдіть до меню пошуку та введіть CMD. Натисніть на Запуск від імені адміністратора.
2. Введіть наступне Команди і вдарив Введіть ключ.
netsh winsock reset netsh int ip скинути IPCONFIG / випуску IPConfig / Оновити
3. Дочекайтеся виконання команд і перезавантажте ПК.
Спосіб 7. Очистіть кеш DNS
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1 Запуск Командний рядок by searching in the Windows меню and click on Run as administrator.
2 Тип IPCONFIG / flushdns in the command window and hit Що натомість? Створіть віртуальну версію себе у .
Також читайте: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1 Запустіть прогін діалогове вікно, натиснувши Клавіші Windows + R разом.
2 Тип ncpa.cpl і вдарив Введіть ключ.
3. Right-click on your active мережевий адаптер і натисніть на властивості.
4. Зніміть прапорець Інтернет-протокол версії 6 (TCP / IPv6) варіант.
5. Нарешті натисніть на OK to save the changes and check if the issue is resolved.
Примітка: If you use multiple network connections, navigate to Мережевий центр та Замініть адаптер settings. Right-click on the adapter and select Забороняти. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1 Тип Диспетчер пристроїв in the Windows search menu and click відкритий.
2. Двічі клацніть на Мережеві адаптери розширити його.
3. Клацніть правою кнопкою миші на вашому водій (напр Двосмуговий бездротовий адаптер Intel (R) Wireless-AC 3168) і натисніть Оновити драйвер.
4. Натисніть на Пошук драйверів на моєму комп'ютері to locate and install a driver manually.
5 Натисніть на браузер button to choose any directory and click on МАЙБУТНІ.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Найкращі драйвери для вашого пристрою вже встановлено.
6. Натисніть на близько для виходу з вікна.
7. перезапуск the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1 Запуск Диспетчер пристроїв from the Windows search menu.
2. Клацніть правою кнопкою миші на водій і виберіть Видалити пристрій.
3. A warning prompt will be displayed on the screen. Check the box “Видалити програмне забезпечення драйвера для цього пристрою” and confirm the prompt by clicking видалення.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Відвідайте веб-сайт виробника.
2. знайти та Завантажити the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the завантажений файл and follow the given instructions to install it.
Також читайте: How to set up a VPN on Windows 10
Спосіб 10: оновіть Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1 Натисніть кнопку Вікна + Я ключі разом відкрити Налаштування На вашому комп'ютері.
2. вибрати Оновлення та безпека.
3. вибрати Перевірити наявність оновлень.
4A. Click Встановити зараз to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Ви в курсі подій повідомлення.
Спосіб 11: видалення останніх оновлень
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Натисніть і утримуйте Клавіші Windows + R разом, щоб відкрити прогін діалогове вікно.
2 Тип appwiz.cpl і вдарив Що натомість? Створіть віртуальну версію себе у .
3. Натисніть на Перегляд встановлених оновлень.
4. Select the most recent update and click on видалення.
5. Confirm the prompt, if any, and перезавантажте ПК.
Також читайте: Як виправити, що Firefox не завантажує сторінки
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the мережеві адаптери installed in your PC along with their settings. All the stored settings are stored to default settings.
Примітка: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Налаштування потім SYSTEM та МЕНЮ. Once you have reset your network, you have to reinstall all networking software як VPN -клієнти or Віртуальні комутатори.
1. Натисніть і утримуйте Клавіші Windows + I разом відкрити Параметри Windows.
2. Натисніть на Мережа та Інтернет.
3. Натисніть на Скидання мережі при Статус.
4. Підтвердьте підказку, натиснувши на Скинути зараз.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Рекомендується:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.