When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- فرسودہ آپریٹنگ سسٹم۔
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe آئکن.
2. If the status is set to منسلک نہیں، پر کلک کریں Network globe icon, choose your Wi-Fi network and click on رابطہ قائم کریں button. Make sure ہوائی جہاز موڈ آن نہیں ہے۔
3. If you again face the same network connection error code, then click on the منقطع کریں button, wait for some time and reconnect it again.
4. Try connecting to a different وائی فائی network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. پر دائیں کلک کریں وائی فائی آئکن اور منتخب کریں نیٹ ورک اور انٹرنیٹ کی ترتیبات کھولیں۔
6. پر کلک کریں وائی فائی.
7. Scroll down the right menu, click on جانا جاتا نیٹ ورکز کا نظم کریں.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select بھول جاؤ۔
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
طریقہ 2: راؤٹر کو دوبارہ شروع کریں۔
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
نوٹ: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. تلاش کریں پاور بٹن آپ کے روٹر کے پیچھے.
2. بٹن کو ایک بار دبائیں اسے بند کر دیں.
3. اب ، منقطع آپ Router power cable اور انتظار کریں جب تک کہ کیپسیٹرز سے بجلی مکمل طور پر ختم نہ ہو جائے۔
4. پھر ، دوبارہ مربوط la طاقت کیبل اور ایک منٹ بعد اسے آن کر دیں۔
5. نیٹ ورک کنکشن کے دوبارہ قائم ہونے تک انتظار کریں اور دوبارہ سائن ان کرنے کی کوشش کریں۔.
بھی پڑھیں: ونڈوز 10 میں نیٹ ورک پر نظر نہ آنے والے کمپیوٹرز کو درست کریں۔
طریقہ 3: رن نیٹ ورک ٹربوشوٹر
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. مارو ونڈوز کلیدی اور ٹائپ کریں دشواری حل کی ترتیبات سرچ بار میں اور کھولیں
2. پر کلک کریں اضافی دشواریوں کا سامنا کرنا پڑتا ہے.
3. منتخب کریں نیٹ ورک اڈاپٹر اور پر کلک کریں خرابی کا سراغ لگانا چلائیں.
4. Select the network adapter to diagnose اور پر کلک کریں اگلے.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem، پر کلک کریں نقص گیر کو بند کریں.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
بھی پڑھیں: فیملی شیئرنگ کو درست کریں YouTube TV کام نہیں کر رہا ہے۔
طریقہ 4: سسٹم فائلوں کی مرمت کریں۔
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (سسٹم فائل چیکر) /DISM (تعیناتی تصویر سروسنگ اور انتظام) utilities on your Windows 10 PC.
1. مارو ونڈوز کلیدی، قسم کمانڈ پرامپٹ اور پر کلک کریں ایڈمنسٹریٹر کے طور پر چلائیں.
2. پر کلک کریں جی ہاں میں یوزر اکاؤنٹ کنٹرول فوری طور پر.
3. ٹائپ کریں chkdsk C: / f / r / x کمانڈ اور مارو کلید درج کریں.
4. اگر آپ کو پیغام کے ساتھ اشارہ کیا جاتا ہے، Chkdsk نہیں چل سکتا… والیوم… استعمال کے عمل میں ہے۔پھر ٹائپ کریں۔ Y اور مارا کلید درج کریں.
5. دوبارہ، کمانڈ ٹائپ کریں: ایس ایف سی / اسکانانو اور پریس کلید درج کریں چلانے کے لئے سسٹم فائل چیکر اسکین.
نوٹ: سسٹم اسکین شروع کیا جائے گا اور اسے ختم ہونے میں چند منٹ لگیں گے۔ دریں اثنا، آپ دوسری سرگرمیاں جاری رکھ سکتے ہیں لیکن یاد رکھیں کہ غلطی سے کھڑکی بند نہ کریں۔
اسکین مکمل کرنے کے بعد، یہ ان میں سے کوئی ایک پیغام دکھائے گا:
- ونڈوز ریسورس پروٹیکشن کو سالمیت کی کوئی خلاف ورزی نہیں ملی۔
- ونڈوز ریسورس پروٹیکشن مطلوبہ عمل انجام نہیں دے سکا۔
- ونڈوز ریسورس پروٹیکشن نے خراب فائلوں کو پایا اور کامیابی کے ساتھ ان کی مرمت کی۔
- ونڈوز ریسورس پروٹیکشن کو خراب فائلیں ملیں لیکن ان میں سے کچھ کو ٹھیک کرنے میں ناکام رہا۔
6. اسکین مکمل ہونے کے بعد، دوبارہ شروع کریں آپ کا کمپیوٹر.
7. دوبارہ شروع کریں۔ کمانڈر فوری طور پر منتظم کے طور پر اور دیے گئے حکموں کو یکے بعد دیگرے انجام دیں:
dism.exe/Online/cleanup-image/scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
نوٹ: آپ کے پاس DISM کمانڈز کو صحیح طریقے سے چلانے کے لیے کام کرنے والا انٹرنیٹ کنیکشن ہونا چاہیے۔
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. مارو ونڈوز کلیدی اور ٹائپ کریں آلہ منتظم in the Windows search menu. Click on اوپن.
2. پھیلائیں۔ نیٹ ورک ایڈاپٹرز اس پر ڈبل کلک کرکے سیکشن۔
3. اپنے پر دائیں کلک کریں۔ نیٹ ورک ڈرائیور (مثال کے طور پر، Intel (R) Dual Band Wireless-AC 3168) اور منتخب کریں آلہ کو غیر فعال کریں آپشن.
4. Confirm the below prompt by clicking on جی ہاں.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the آلہ کو فعال کریں آپشن.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
بھی پڑھیں: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Go to the search menu and type سییمڈیہے. پر کلک کریں ایڈمنسٹریٹر کے طور پر چلائیں.
2. درج ذیل کو ٹائپ کریں۔ حکم دیتا ہے اور مارا کلید درج کریں.
netsh winsock ری سیٹ netsh int ip دوبارہ ترتیب دیں۔ ipconfig / رہائی ipconfig / تجدید
3. حکموں کے مکمل ہونے کا انتظار کریں اور اپنا کمپیوٹر دوبارہ چلائیں.
طریقہ 7: DNS کیشے کو فلش کریں۔
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. لانچ کمانڈ پرامپٹ by searching in the ونڈوز مینو and click on Run as administrator.
2. ٹائپ کریں ipconfig / flushdns in the command window and hit درج.
بھی پڑھیں: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. شروع کریں رن دبانے سے ڈائیلاگ باکس ونڈوز + آر کیز ایک ساتھ.
2. ٹائپ کریں ncpa.cpl اور مارا کلید درج کریں.
3. Right-click on your active نیٹ ورک اڈاپٹر اور پر کلک کریں پراپرٹیز.
4. غیر چیک کریں۔ انٹرنیٹ پروٹوکول ورژن 6 (TCP / IPv6) آپشن.
5. آخر میں، پر کلک کریں۔ OK to save the changes and check if the issue is resolved.
نوٹ: If you use multiple network connections, navigate to نیٹ ورک اور شیئرنگ سینٹر اور اڈاپٹر تبدیل کریں settings. Right-click on the adapter and select غیر فعال کریں. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. ٹائپ کریں آلہ منتظم in the Windows search menu and click اوپن.
2. پر ڈبل کلک کریں۔ نیٹ ورک ایڈاپٹرز اس کو بڑھانا
3. اپنے پر دائیں کلک کریں۔ ڈرائیور (مثال کے طور پر انٹیل (ر) ڈوئل بینڈ وائرلیس-اے سی 3168) اور کلک کریں ڈرائیور کو اپ ڈیٹ کریں.
4. پر کلک کریں میرے کمپیوٹر کو ڈرائیوروں کے لئے براؤز کریں to locate and install a driver manually.
5. پر کلک کریں براؤزر button to choose any directory and click on اگلے.
5A. The drivers will be updated to the latest version if they are not updated.
5B اگر وہ پہلے سے ہی ایک اپ ڈیٹ شدہ مرحلے میں ہیں، تو اسکرین مندرجہ ذیل پیغام دکھاتی ہے، آپ کے آلے کے لیے بہترین ڈرائیورز پہلے ہی انسٹال ہیں۔.
6. پر کلک کریں کلوز کھڑکی سے باہر نکلنا
7. دوبارہ شروع کریں the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. لانچ آلہ منتظم from the Windows search menu.
2. پر دائیں کلک کریں ڈرائیور اور منتخب کریں آلہ انسٹال کریں.
3. A warning prompt will be displayed on the screen. Check the box “اس آلہ کے لئے ڈرائیور سافٹ ویئر کو حذف کریں” and confirm the prompt by clicking انسٹال کریں.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. ملاحظہ کریں صنعت کار کی ویب سائٹ.
2. مل اور لوڈ the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the ڈاؤن لوڈ فائل اور اسے انسٹال کرنے کے لیے دی گئی ہدایات پر عمل کریں۔
بھی پڑھیں: ونڈوز 10 پر وی پی این کیسے ترتیب دیا جائے۔
طریقہ 10: ونڈوز کو اپ ڈیٹ کریں۔
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. دبائیں ونڈوز + I چابیاں ایک ساتھ کھولنے کے لئے ترتیبات آپ کے کمپیوٹر پر
2. منتخب کریں تازہ کاری اور سیکیورٹی.
3. منتخب کریں اپ ڈیٹ کے لیے چیک کریں.
4A. Click اب انسٹال دستیاب تازہ ترین اپ ڈیٹ کو ڈاؤن لوڈ اور انسٹال کرنے کے لیے۔
4B اگر آپ کا سسٹم پہلے سے ہی اپ ٹو ڈیٹ ہے، تو یہ ظاہر ہوگا۔ آپ اپ ٹو ڈیٹ ہیں۔ پیغام.
طریقہ 11: حالیہ اپڈیٹس کو ان انسٹال کریں۔
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. دبائیں اور پکڑو ونڈوز + آر کیز ایک ساتھ کھولنے کے لئے رن ڈائلاگ باکس.
2. ٹائپ کریں Appwiz.cpl اور مارا درج.
3. پر کلک کریں نصب اپ ڈیٹس دیکھیں.
4. Select the most recent update and click on انسٹال کریں.
5. Confirm the prompt, if any, and پی سی کو دوبارہ شروع کریں.
بھی پڑھیں: فائر فاکس کو کیسے درست کریں جو صفحات لوڈ نہیں ہو رہے ہیں۔
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the نیٹ ورک ایڈاپٹرز installed in your PC along with their settings. All the stored settings are stored to default settings.
نوٹ: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to ترتیبات تو نظام اور ہمارے بارے میں. Once you have reset your network, you have to reinstall all networking software کی طرح وی پی این کلائنٹس or ورچوئل سوئچز.
1. دبائیں اور پکڑو ونڈوز + آئی کیز۔ ایک ساتھ کھولنے کے لئے ونڈوز ترتیبات.
2. پر کلک کریں نیٹ ورک اور انٹرنیٹ.
3. پر کلک کریں نیٹ ورک ری سیٹ کے تحت درجہ.
4. پر کلک کرکے پرامپٹ کی تصدیق کریں۔ اب ری سیٹ کریں.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
سفارش کی جاتی ہے:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.