اگر آپ کا سامنا ہے۔ We couldn’t complete the updates, Undoing changes, Don’t turn off your computer message, and you are stuck in a boot loop, then you will be glad you came here because this post is going to help you fix this error.
Well, Windows 10 is the latest edition of Microsoft Operating System and like all the other OS this sure seems to have a lot of issues too. But the one which we are particularly talking about here is while downloading the new updates and restarting the PC, the update process just stuck and Windows could not start and all we are left with is this annoying error message:
We couldn't complete the updates, Undoing changes, Don't turn off your computer.
And we are just stuck in an endless loop of this error and restarting our PC doesn’t get us anywhere except back to this error. In addition to the above error after restarting several times you may start to see some progress like this:
Installing Updates 15% We couldn’t complete the updates, Undoing changes, Don’t turn off your computer Restarting
But we have a piece of bad news for you, unfortunately, this will only complete till 30% and then it will again restart and this will go on and on and on till you decide to do something about it, well you are here so I guess its time to fix this issue.
Anyway, if you are facing this error on your system, don’t worry as you can easily address the same by just following and applying the fixes from below. So without wasting any time let’s see How to Fix We couldn’t complete the updates, Undoing changes issue with the help of the below-listed troubleshooting steps.
درست کریں ہم اپ ڈیٹس کو مکمل نہیں کر سکے، تبدیلیوں کو کالعدم کر رہے ہیں۔
نوٹ: DO NOT, I REPEAT, DO NOT REFRESH/RESET YOUR PC.
If you are able to log on to Windows:
Method 1: Delete Software Distribution Folder
1. دبائیں ونڈوز کلیدی + ایکس اور منتخب کریں کمانڈ پرپیٹ (ایڈمن).
2. Now Type the following command inside cmd and hit enter after each one:
نیٹ سٹاپ wuauserv نیٹ سٹاپ بٹس نیٹ سٹاپ کرپٹ ایس سی سی نیٹ سٹاپ MSiserver
3. Now browse to the C: ونڈوز سرورز تقسیم فولڈر اور اندر اندر تمام فائلوں اور فولڈر کو خارج کر دیں.
4. Again go to command prompt and type each of these commands and hit Enter:
خالص آغاز wuauserv خالص آغاز کرپٹ ایس ایس سی خالص شروع بٹس خالص آغاز msiserver
5. Restart your computer to save changes.
6. Again try installing the updates and this time you may be successful in installing updates.
7. If you are still facing some issues restore your PC to the date before downloading the updates.
Alternatively, whether you are able to log on to Windows or not, you should try Methods (c),(d), and (e).
Method 2: Download Windows Update Troubleshooter
1. Open your web browser and go to the مندرجہ ذیل صفحہ.
2. پر کلک کریں "ونڈوز اپ ڈیٹ ٹربل شوٹر ڈاؤن لوڈ اور چلائیں۔"
3. After the file has finished downloading, double-click on it to run.
4. Click Next and let Windows Update Troubleshooter run.
5. Follow the on-screen instruction to complete the process.
6. If a problem is found, click on Apply this fix.
7. Finally, try again to install the updates and this time you won’t face We couldn’t complete the updates, Undoing changes غلطی کا پیغام
Method 3: Enable App Readiness
1. دبائیں ونڈوز کلیدی + R پھر ٹائپ کریں services.msc اور داخل ہو جاؤ.
2. نیویگیشن ایپ کی تیاری and right click then select پراپرٹیز.
3. Now set the Startup type to خودکار اور پر کلک کریں شروع کریں
4. Click Apply followed by OK and close the services.msc window.
5. Restart your PC and you may be able to fix couldn’t complete the updates, Undoing changes error message.
Method 4: Disable Automatic Updates
1. دبائیں ونڈوز کلیدی + R پھر ٹائپ کریں services.msc اور داخل ہو جاؤ.
2. نیویگیشن ونڈوز اپ ڈیٹ setting and right click then select پراپرٹیز.
3. Now click Stop and select Startup type to معذور
4. Click Apply followed by OK and close the services.msc window.
5. Restart your PC and again try installing updates.
دیکھیں کہ کیا آپ کر سکتے ہیں۔ Fix We couldn’t complete the updates, Undoing changes issue، اگر نہیں تو جاری رکھیں۔
Method 5: Increase Windows System Reserved Partition Size
NOTE: If you use BitLocker, uninstall or delete it.
1. You can increase the reserved partition size manually or by this Partition Manager Software.
2. دبائیں ونڈوز کلیدی + ایکس اور پر کلک کریں ڈسک مینجمنٹ۔
3. Now to extend the size of Reserved Partition you must have some unallocated space or you have to create some.
4. To create it, right-click on one of your partitions (Excluding OS partition) and select حجم سکڑیں۔
5. Finally, right-click on Reserved Partition اور منتخب کریں حجم بڑھائیں۔
6. Restart your PC and you will be able to fix we couldn’t complete the updates, Undoing changes message.
Method 6: Run Windows 10 Update Troubleshooter
You can also solve the We couldn’t complete the updates issue by running “Windows Update troubleshooter”. This will take a few minutes and will automatically detect & fix your problem.
1. ترتیبات کو کھولنے کے لیے ونڈوز کی + I دبائیں پھر کلک کریں۔ تازہ کاری اور سیکیورٹی۔
2. From the left-hand menu make sure to select پریشان کن
3. Now under Get up and running section, click on ونڈوز اپ ڈیٹ.
4. Once you click on it, click on “خرابی کا سراغ لگانا چلائیں” under Windows Update.
5. Follow on-screen instructions to run the troubleshooter and see if you’re able to Fix We couldn’t complete the updates Undoing changes issue.
Method 7: If all else fails then install the Updates Manually
1. Right-click on “یہ پی سی"اور منتخب کریں۔ پراپرٹیز.
2. Now in سسٹم پراپرٹیز، چیک کریں System type and see if you have a 32-bit or 64-bit OS.
3. ترتیبات کو کھولنے کے لیے ونڈوز کی + I دبائیں پھر کلک کریں۔ تازہ کاری اور سیکیورٹی آئکن.
4. تحت ونڈوز اپ ڈیٹ note down the “KB" number of the update which fails to install.
5. Next, open Internet Explorer or Microsoft Edge پھر تشریف لے جائیں مائیکروسافٹ اپ ڈیٹ کیٹلاگ کی ویب سائٹ.
نوٹ: Link only work in Internet Explorer or Edge.
6. Under the search box, type the KB number you noted in step 4.
7. اب پر کلک کریں بٹن ڈاؤن لوڈ کریں next to the latest update for your OS type i.e. 32-bit or 64-bit.
8. Once the file is downloaded, double-click on it and follow on-screen instructions to complete the installation.
Method 8: Miscellaneous Fixes
1. دوڑنا CCleaner to fix registry issues.
2. Create a new Admin account and try installing updates from that account.
3. If you know which updates are causing problems manually download the updates اور انہیں انسٹال کریں.
4. Delete any VPN services installed on your PC.
5. Disable Firewall and Antivirus, then again try installing the updates.
6. If nothing works, again download the Windows and then try installing the updates.
If you are not able to log on to Windows and stuck in a restart loop.
IMPORTANT: After you are able to log on to Windows try all the above-mentioned methods.
اہم اعلان دستبرداری:
یہ بہت جدید ٹیوٹوریل ہیں، اگر آپ نہیں جانتے کہ آپ کیا کر رہے ہیں تو آپ غلطی سے اپنے پی سی کو نقصان پہنچا سکتے ہیں یا کچھ اقدامات غلط طریقے سے انجام دے سکتے ہیں جو بالآخر آپ کے کمپیوٹر کو ونڈوز پر بوٹ کرنے سے قاصر کر دے گا۔ لہذا اگر آپ نہیں جانتے کہ آپ کیا کر رہے ہیں، تو براہ کرم کسی ٹیکنیشن سے مدد لیں یا ماہر کی نگرانی کی سفارش کی جاتی ہے۔
Method (i): System Restore
1. Restart your Windows 10.
2. As the system restarts enter into BIOS setup اور configure your PC to boot from CD/DVD.
3. Windows 10 بوٹ ایبل انسٹالیشن DVD داخل کریں اور اپنے پی سی کو دوبارہ شروع کریں۔
4. When prompted to Press any key to boot from CD or DVD, press any key to continue.
5. اپنی زبان کی ترجیحات منتخب کریں، اور اگلا پر کلک کریں۔ مرمت پر کلک کریں۔ آپ کا کمپیوٹر نیچے بائیں طرف۔
6. On choose an options screen, click پریشان کن
7. On Troubleshoot screen, click اعلی درجے کا آپشن۔
8. On Advanced options screen, click نظام کی بحالی.
9. Select a restore point before the current update and restore your computer.
10. When the Windows restart you won’t see we couldn’t complete the updates, Undoing changes پیغام.
11. Finally, try method 1 and then install the latest updates.
Method (ii): Delete Problematic update files
1. Restart your Windows 10.
2. As the system restarts enter into BIOS setup and configure your PC to boot from CD/DVD.
3. Windows 10 بوٹ ایبل انسٹالیشن DVD داخل کریں اور اپنے پی سی کو دوبارہ شروع کریں۔
4. جب اشارہ کیا جائے۔ سی ڈی یا ڈی وی ڈی سے بوٹ کے ل any کسی بھی کلید کو دبائیں, press any key to continue.
5. اپنی زبان کی ترجیحات منتخب کریں، اور اگلا پر کلک کریں۔ مرمت پر کلک کریں۔ آپ کا کمپیوٹر نیچے بائیں طرف۔
6. On choose an options screen, click پریشان کن
7. On Troubleshoot screen, click اعلی درجے کا آپشن۔
8. On Advanced options screen, click کمانڈ پرامپٹ.
9. Type these commands in cmd and press enter after each one:
cd C:Windows
del C:WindowsSoftwareDistribution*.* /s /q
10. Close Command prompt and restart your PC. You will be able to log on to Windows normally.
Finally, try installing the update and you will be able to fix we couldn’t complete the updates, Undoing changes غلطی کا پیغام
Method (iii): Run SFC and DISM
1. Open Command Prompt at boot.
2. درج ذیل کمانڈ کو ٹائپ کریں اور Enter کو دبائیں۔
ایس ایف سی / اسکانانو
3. Let System File Check (SFC) run as it usually takes 5-15 minutes to complete.
4. Now type the following in cmd (Sequential order is important) and hit enter after each one:
a) Dism/Online/Cleanup-Image/CheckHealth
ب) ڈسم / آن لائن / کلین اپ امیج / اسکین ہیلتھ
c) Dism /online /Cleanup-Image /startcomponentcleanup
d) DISM /Online /Cleanup-Image /RestoreHealth
#انتباہ: This is not a fast process, component cleanup can take almost 5 hours.
5. After running DISM it is a good idea to re-run ایس ایف سی / سکین to make sure all the issues were fixed.
6. Restart your computer and this time updates will be installed without any problem.
Method (iv): Disable Secure Boot
1. اپنے پی سی کو دوبارہ شروع کریں۔
2. When the system restart Enter the BIOS سیٹ اپ by pressing a key during the bootup sequence.
3. Find the Secure Boot setting, and if possible, set it to فعال This option is usually in either the Security tab, the Boot tab, or the Authentication tab.
#انتباہ: سیکیور بوٹ کو غیر فعال کرنے کے بعد اپنے پی سی کو فیکٹری حالت میں بحال کیے بغیر سیکیور بوٹ کو دوبارہ چالو کرنا مشکل ہو سکتا ہے۔
4. Restart your PC and update will be installed successfully without any error message we couldn’t complete the updates, Undoing changes.
5 دوبارہ Enable the Secure Boot option from BIOS setup.
Method (v): Delete the System Reserved partition
1. Open Command Prompt and type each of the following commands, hit enter after each one:
bcdboot C:Windows /s C: diskpart فہرست والیوم select vol (Select System Volume) کارروائی فہرست والیوم select vol (Select System Reserved Volume) غیر فعال باہر نکلیں
Configure BCD:
bcdedit /set {bootmgr} device partition=C: bcdedit /set {default} device partition=C: bcdedit /set {default} osdevice partition=C:
2. Before making any changes or rebooting, make sure that you have Windows installation DVD or WinPE/WinRE Cd or USB flash Drive in the case of Windows Boot failure. If Windows doesn’t boot, use the Windows installation disk or WinPE/WinRE to boot and at the command prompt type (How to create WinPE Bootable USB):
bootrec / fixmbr bootrec / fixboot بوٹرایک / تعمیراتی بیڈی
3. Once rebooted, move WinRE from the system reserved partition to the system partition.
4. Again open Command Prompt and type the following command, hit enter after each one:
Assign a drive letter to the recovery partition in Diskpart:
diskpart فہرست والیوم select vol <Recovery Volume> assign let=R Disable WinRE: reagentc /غیر فعال
Remove WinRE from Reserved partition:
rd R:Recovery
Copy WinRE to System partition:
robocopy C:WindowsSystem32Recovery R:RecoveryWindowsRE WinRE.wim /copyall /dcopy:t
Configure WinRE:
reagentc /setreimage /path C:RecoveryWindowsRE
Enable WinRE:
reagentc / اہل بنائیں
5. For future use, create a new partition at the end of the drive (after the OS partition) and store WinRE and an OSI folder (Original System Installation) which contains all files contained within the Windows 10 DVD. Please make sure that you have enough free space on your hard disk to create this partition drive (usually 100GB). And if you choose to make this partition, it’s important that you set the partition ID flag to 27 (0x27) using Diskpart, as it specifies that it is a Recovery partition.
آپ کیلئے تجویز کردہ:
If nothing works then Restore your PC to an earlier time, delete the problematic update from Control Panel, disable the automatic updates and use your PC normally till Microsoft work towards fixing this update problem. In a few days probably 20-30 days try installing the updates again, if successful congratulations but if you are again stuck, then try the above methods, and this time you may succeed.
That’s it you have successfully fix We couldn’t complete the updates, Undoing changes. Don’t turn off your computer issue and if you still have any queries regarding this update please feel to ask them in comments.