If you face this error message “Fix Selected boot image did not authenticate”, then your PC cannot load BIOS properly, and the main cause of this error seems to be Secure Boot. The boot sequence is saved into the database, and a violation of it seems to lead to this error message. This error can also be caused due to corrupted or incorrect BCD (Boot Configuration Data) configuration.
If you click OK, the PC will restart, and you will again be back on this error message. So without wasting any time let’s see how to actually Fix Selected boot image did not authenticate error with the help of below-listed troubleshooting guide.
[FIXED] Selected boot image did not authenticate error
Method 1: Switch to Legacy Boot in BIOS
1. Boot into BIOS, when the computer starts repeatedly press F10 or DEL to enter into BIOS سیٹ اپ۔
2. Now get into سسٹم کی ترتیب پھر تلاش کریں Legacy Support.
3. Enable Legacy support using the arrow keys and pressing Enter.
4. Then make sure Secure boot is disabled, if not then disable it.
5. Save changes and exit BIOS.
6. Reboot your PC and see if you can Fix Selected boot image did not authenticate error, اگر نہیں تو جاری رکھیں.
Method 2: Perform Hard Reset
1. Turn off your PC completely and remove the power cord.
2. بیٹری کو ہٹا دیں from the back of your PC.
3. Hold the power button for 20-30 seconds to perform a hard reset.
4. Again put your battery and connect the AC power cord.
5. Restart your PC and see if you’re able to fix the issue.
Method 3: Load Default BIOS Configuration
1. Turn off your laptop, then turn it on and simultaneously F2، DEL یا F12 دبائیں۔ (آپ کے کارخانہ دار پر منحصر ہے) داخل ہونے کے لیے BIOS سیٹ اپ۔
2. Now you’ll need to find the reset option to load the default configuration, and it may be named Reset to default, Load factory defaults, Clear BIOS settings, Load setup defaults, or something similar.
3. Select it with your arrow keys, press Enter, and confirm the operation. Your BIOS اب اس کا استعمال کریں گے پہلے سے طے شدہ ترتیبات
4. Once you’re logged into Windows see if the issue with the charging is resolved or not.
طریقہ 4: خودکار مرمت چلائیں۔
1. Insert the Windows 10 bootable installation DVD اور اپنے کمپیوٹر کو دوبارہ شروع کریں.
2. When prompted to کوئی بھی بٹن دبائیے to boot from CD or DVD, press any key to continue.
3. Select your language preferences, and click Next. مرمت پر کلک کریں۔ آپ کا کمپیوٹر نیچے بائیں طرف۔
4. On choose an option screen, click دشواری حل کریں.
5. On Troubleshoot screen, click the اعلی درجے کے اختیارات۔.
6. On the Advanced options screen, click خودکار مرمت یا اسٹارٹ اپ مرمت.
7. Wait till the ونڈوز آٹومیٹک/اسٹارٹ اپ مرمت مکمل
8. Restart and you have successfully Fix Selected boot image did not authenticate error, if not, continue.
بھی پڑھیں: How to fix Automatic Repair couldn’t repair your PC.
Method 5: Run Hardware Diagnostics
اگر آپ اب بھی قابل نہیں ہیں۔ Fix Selected boot image did not authenticate error, then chances are your hard disk might be failing. In this case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace the Hard Disk or not. But instead of hard disk, any other hardware might also be failing such as memory or notebook panel etc.
To run Diagnostics restart your PC and as the computer starts (before the boot screen), press F12 key. When the Boot menu appears, highlight the Boot to Utility Partition option or the Diagnostics option press enter to start the Diagnostics. This will automatically check all the hardware of your system and will report back if any issue is found.
سفارش کی جاتی ہے:
یہ آپ نے کامیابی سے حاصل کی ہے۔ Fix Selected boot image did not authenticate error if you still have any questions regarding this post then feel free to ask them in the comment’s section.