Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
ریبوٹ کریں اور مناسب بوٹ ڈیوائس کا مسئلہ منتخب کریں [حل شدہ]
طریقہ 1: درست بوٹ آرڈر سیٹ کریں۔
آپ کو غلطی نظر آ رہی ہو گی"Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1. جب آپ کا کمپیوٹر شروع ہوتا ہے (بوٹ اسکرین یا ایرر اسکرین سے پہلے)، بار بار ڈیلیٹ یا F1 یا F2 کی دبائیں (آپ کے کمپیوٹر کے مینوفیکچرر پر منحصر ہے) BIOS سیٹ اپ درج کریں۔.
2. ایک بار جب آپ BIOS سیٹ اپ میں ہیں اختیارات کی فہرست سے بوٹ ٹیب کو منتخب کریں۔
3.اب یقینی بنائیں کہ کمپیوٹر ہارڈ ڈسک یا ایس ایس ڈی بوٹ آرڈر میں اولین ترجیح کے طور پر سیٹ کیا گیا ہے۔ اگر نہیں تو اوپر یا نیچے تیر والے بٹنوں کا استعمال ہارڈ ڈسک کو اوپر سیٹ کرنے کے لیے کریں جس کا مطلب ہے کہ کمپیوٹر پہلے کسی دوسرے ذریعہ کے بجائے اس سے بوٹ کرے گا۔
4. آخر میں، اس تبدیلی کو بچانے کے لیے F10 دبائیں اور باہر نکلیں۔ یہ ہونا ضروری ہے Fix Reboot and Select Proper Boot Device Issue، اگر نہیں تو جاری رکھیں۔
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
ڈائیگناسٹک کو چلانے کے لیے اپنے پی سی کو ری اسٹارٹ کریں اور جیسے ہی کمپیوٹر شروع ہوتا ہے (بوٹ اسکرین سے پہلے)، F12 کی دبائیں اور جب بوٹ مینیو ظاہر ہو تو بوٹ ٹو یوٹیلیٹی پارٹیشن آپشن یا ڈائیگناسٹک آپشن کو ہائی لائٹ کریں اور ڈائیگناسٹک شروع کرنے کے لیے انٹر دبائیں۔ یہ آپ کے سسٹم کے تمام ہارڈ ویئر کو خود بخود چیک کرے گا اور اگر کوئی مسئلہ پایا جاتا ہے تو واپس رپورٹ کرے گا۔
سفارش کی جاتی ہے: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
اہم: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1. Windows 10 بوٹ ایبل انسٹالیشن ڈی وی ڈی داخل کریں اور اپنے پی سی کو دوبارہ شروع کریں۔
2. جب سی ڈی یا ڈی وی ڈی سے بوٹ کرنے کے لیے کوئی بھی کلید دبانے کا اشارہ کیا جائے تو جاری رکھنے کے لیے کوئی بھی کلید دبائیں۔
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8. دوبارہ شروع کریں اور آپ نے کامیابی سے کامیابی حاصل کی ہے۔ Fix Reboot and Select Proper Boot Device issueاگر نہیں تو جاری رکھیں۔
نیز، خودکار مرمت کو ٹھیک کرنے کا طریقہ پڑھیں آپ کے کمپیوٹر کی مرمت نہیں ہو سکی۔
طریقہ 5: UEFI بوٹ کو فعال کریں۔
1. اپنے پی سی کو دوبارہ شروع کریں اور بوٹ سیٹ اپ کو کھولنے کے لیے اپنے پی سی کے لحاظ سے F2 یا DEL کو تھپتھپائیں۔
2.The make the following changes:
بوٹ لسٹ کے آپشن کو UEFI میں تبدیل کریں لوڈ لیگیسی آپشن کو غیر فعال کریں ROM محفوظ بوٹ کو فعال کریں۔
3. اگلا، محفوظ کرنے کے لیے F10 کو تھپتھپائیں اور بوٹ سیٹ اپ سے باہر نکلیں۔
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
نوٹ: سسٹم ریزروڈ پارٹیشن (عموماً 100 ایم بی) کو ہمیشہ ایکٹو نشان زد کریں اور اگر آپ کے پاس سسٹم ریزروڈ پارٹیشن نہیں ہے تو C: ڈرائیو کو ایکٹو پارٹیشن کے بطور نشان زد کریں۔
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
طریقہ 7: ونڈوز 10 انسٹال کی مرمت کریں۔
اگر مندرجہ بالا حلوں میں سے کوئی بھی آپ کے لیے کام نہیں کرتا ہے تو آپ یقین کر سکتے ہیں کہ آپ کا HDD ٹھیک ہے لیکن آپ کو غلطی نظر آ رہی ہو گی۔Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a keyکیونکہ HDD پر آپریٹنگ سسٹم یا BCD کی معلومات کو کسی طرح مٹا دیا گیا تھا۔ ٹھیک ہے، اس معاملے میں، آپ ونڈوز انسٹال کرنے کی مرمت کرنے کی کوشش کر سکتے ہیں لیکن اگر یہ بھی ناکام ہوجاتا ہے تو پھر واحد حل باقی رہ جاتا ہے کہ ونڈوز کی ایک نئی کاپی انسٹال کریں (کلین انسٹال)۔
یہ آپ نے کامیابی سے حاصل کی ہے۔ درست کریں Reboot and Select proper Boot device issue لیکن اگر آپ کے پاس اب بھی اس پوسٹ کے بارے میں کوئی سوالات ہیں تو بلا جھجھک ان سے تبصرے کے سیکشن میں پوچھیں۔