After installing the latest Windows feature update, your PC may be trapped in an automated repair cycle. This article will give you various troubleshooting techniques if you’re attempting to locate a repair approach that will allow you to resolve diagnosing your PC Windows 10 issue. So, continue reading to fix diagnosing your PC stuck issue on Windows 10.
How to Fix Stuck on Diagnosing your PC in Windows 10
We looked into this diagnosing your PC stuck issue by looking at multiple user reports and tried various repair strategies suggested by some impacted users. As it turns out, various conditions make your system trapped inside the diagnosing your PC screen. Here’s a list of circumstances that might lead to this issue on Windows 10.
- System File Corruption: Corrupted system files might also cause the System Diagnostic tool to appear at every system start-up. If this utility is also corrupted, it will be stuck in a loop.
- Inadequate System Space: As it turns out, this problem of this issue can also arise when the system lacks sufficient storage capacity to load all the programs and services required for the starting operation.
- Glitched Automated Repair Utility: This issue has been reported by multiple customers to be caused by mysterious system drive troubles. In this instance, the Automatic Repair program will try to open at every restart in an attempt to fix the problem, but it will be unable to locate the source of the problem.
- Faulty BCD Data: Corrupted booting data might also cause this issue in severe conditions, which prevents the starting process from finishing.
Some afflicted customers have attempted rebooting their computers to get rid of this problem but have claimed that their computers go into a dark screen, show the logo, and then return to the Diagnostic PC page. The operating system indicates that your device has been diagnosed, but there might be no progress made. You can follow the below methods to resolve the issue.
Method 1: Perform Hard Reboot
You can do a hard reboot if your Windows is unable to boot due to the Preparing Automatic Repair or Diagnosing your PC issue.
1. Elektr tarmog'idan uzing AC adapter va olib tashlang batareya qurilmadan.
2. Check if it boots up normally by pressing and holding the quvvat tugmasi uchun 20 soniya.
If this technique fails, try one of the following options.
Bundan tashqari: Windows 10 da WDF_VIOLATION xatosini qanday tuzatish mumkin
2-usul: Xavfsiz rejimda yuklash va bo'sh joyni tozalash
As some users have discovered, this issue can also occur when the system does not have enough capacity to start. Several individuals in a similar position have overcome the problem by running their machines in Safe Mode and freeing up some space. Follow our guide on How to Boot to Safe Mode in Windows 10.
Then, perform Disk cleanup by following our guide to run Disk Cleanup.
If diagnosing your PC Windows 10 problem persists, follow the next procedure below.
3-usul: tizim fayllarini ta'mirlash
It’s also possible that this problem is caused by System File corruption. These corrupted files might prevent the booting procedure from finishing. You’ll have to run the scans before the Booting phase since you can’t go beyond the Diagnostics page. Read our guide on How to Repair System Files on Windows 10.
Bundan tashqari: Vaqt ma'lumotlari mavjud bo'lmagani uchun kompyuter qayta sinxronlanmadi
Method 4: Run System Restore Utility
You may be dealing with a serious corruption problem that can’t be treated traditionally. When faced with a circumstance like this, the best action is to take a damage-control strategy. Most start-up troubles caused by system file corruption can be resolved by returning the machine to a healthy condition in which all components are working properly. Follow the below steps.
1. ni joylashtiring o'rnatish disk va kompyuteringizni qayta yoqing.
2. Istalgan tugmani bosing kalit to start up the installation media when you see the booting screen.
3. When Windows Setup has finished loading, click on Kompyuteringizni ta'mirlash.
4. ga kiring Muammo bartaraf qilish menu from the first repair menu.
5. Bosing ilg'or Options from the Troubleshoot menu.
6. Keyin ustiga bosing Buyruqning xohishi from the list of available utilities.
7. ochish uchun Tizimni qayta tiklash program, type the rstrui.exe command into the Buyruqning xohishi oyna va tugmasini bosing Enter tugmachasini bosing.
8. Bosing Keyingi once you’ve reached the first screen.
9. Endi, belgilang the option labeled Ko'proq tiklash nuqtalarini ko'rsatish.
10. Once you’ve done so, go through each restoration surat and pick one taken before the Diagnostics problem.
11. To go on to the next option, choose the suitable foto va ustiga bosing Keyingi.
12. Endi, ustiga bosing tugatmoq.
Your system will restart automatically after restoring, and the old machine will be fixed at the next system starting.
Method 5: Rebuild BCD
In Windows 10, you’ll get the Preparing Automatic Repair error if the boot files are missing or damaged. As a result, some users will re-build the boot record using the procedures below.
1. Insert the Windows bootable installation CD into the PC displaying the error message Preparing Automatic Repair or Diagnosing your PC.
2. Start your computer by booting from the o'rnatish CD.
3. To continue, choose your til sozlamalari va ustiga bosing Keyingi tugmasini bosing.
4. Tanlang ta'mir kompyuteringiz.
5. Tanlang Muammo bartaraf qilish.
6. Tanlang Buyruqning xohishi.
7. Enter the instructions below into the prompt, and press the Enter tugmachasini bosing har biridan keyin.
bootrec / fixmbr bootrec / fixboot bootrec / scanos bootrec / rebuildbcd
8. Then, type the command Chiqish tugmasini bosing Enter tugmachasini bosing.
9. Nihoyat, kompyuterni qayta ishga tushiring.
Bundan tashqari: Windows yangilash xatosi 80072ee2 qanday tuzatiladi
6-usul: Avtomatik ishga tushirishni ta'mirlashni o'chiring
If this happens, the Automatic Start-up Repair software will launch at every system start-up. However, if the utility is broken, you might not be able to go past the start-up screen. Therefore, disabling this software would prevent the Diagnosing your PC screen from appearing.
1. As soon as you see the introductory screen, press the F8 key repeatedly to get to the Kengaytirilgan yuklash parametrlari menyu.
2. Tanlang Xavfsiz xolat with Networking from the Advanced Boot Options menu by pressing the F5 tugmasi or using the arrow keys.
3. When the booting routine is complete, press Windows + I tugmalari ishga tushirish Muloqot oynasini ishga tushirish.
4. Turi cmd va urdi Ctrl + Shift + Enter tugmalari to open an Yuqori Buyruqning so'rovi.
5. Bosing ha so'rovda.
6. Quyidagilarni kiriting buyruq va matbuot Enter tugmachasini bosing.
bcdedit /set recoveryenabled NO
7. Once the process is complete, qayta ishga tushirish Sizning qurilmangiz.
If diagnosing your PC Windows 10 problem persists or you don’t get a different error, continue the next procedure.
Method 7: Uninstall Updates
If the update fails to install properly on your device, you might face this issue. Follow the below steps to resolve the discussed issue.
1. tugmasini bosing Windows kaliti va yozing Boshqaruv uskunasi, keyin ustiga bosing ochiq.
2. Endi, ustiga bosing Dasturni o'chirish variantini tanlang dasturlar tasvirlangan menyu.
3. Endi, ustiga bosing O'rnatilgan yangilanishlarni ko'rish ko'rsatilganidek, chap panelda.
4. Endi, havola orqali eng so'nggi yangilanishni qidiring va tanlang O'rnatilgan sana va ustiga bosing O'chir variant quyida ko'rsatilganidek.
5. Nihoyat, har qanday so'rovni tasdiqlang va kompyuterni qayta ishga tushiring.
Check if diagnosing your PC stuck issue persists or not.
Bundan tashqari: Windows 7 da iaStorA.sys BSOD xatosini tuzatishning 10 usuli
Method 8: Perform Repair Install
If none of the above-mentioned repair methods have worked, you’re probably dealing with a serious case of system corruption that can’t be fixed using normal methods. In this case, the only way to repair the problem is to reset every Windows component, including any booting-related tasks causing the Automatic Repair loop. You may always perform a clean installation but bear in mind that doing so will lose any saved data within your Windows system. If you choose a clean install, all your personal data, applications, games, documents, and other media will disappear. Read our guide on How to do a Clean Install of Windows 10 and implement the same.
Tavsiya:
We hope you found this information useful and that you were able to resolve stuck on diagnosing your PC in Windows 10 problem. Please let us know which technique was the most beneficial for you. Please use the form below if you have any queries or comments. Also, let us know what you want to learn next.