Fix Error code 0x80070035 The network path was not found: In Microsoft Windows sharing the same network allows to access the files and data on each other’s computer without connecting them with the ethernet cable. But sometimes if you are hosting your computer on the network you might see the message saying “Error code: 0x80070035. The network path was not found.”
Well, there are various reason as to why you may be seeing this error code but mainly it is caused due to Antivirus or Firewall blocking the resources. Anyway, without wasting any time let’s see how to actually fix Error code 0x00028001 and error code 0x80070035 The network path was not found with the below-listed troubleshooting guide.
Fix Error code 0x80070035 The network path was not found
Đảm bảo tạo điểm khôi phục đề phòng trường hợp xảy ra sự cố.
Phương pháp 1: Tạm thời vô hiệu hóa phần mềm chống vi-rút và tường lửa
1. Nhấp chuột phải vào Biểu tượng chương trình chống vi-rút từ khay hệ thống và chọn Vô hiệu hóa.
2.Tiếp theo, chọn khung thời gian mà Phần mềm chống vi-rút sẽ vẫn bị vô hiệu hóa.
Lưu ý: Chọn khoảng thời gian nhỏ nhất có thể, ví dụ 15 phút hoặc 30 phút.
3.Once done, again check if the error resolves or not.
4. Nhấn phím Windows + I sau đó chọn Bảng điều khiển.
5.Tiếp theo, nhấp vào Hệ thống và Bảo mật.
6.Sau đó bấm vào Tường lửa của Windows.
7. Bây giờ, từ khung cửa sổ bên trái, hãy nhấp vào Bật hoặc tắt Tường lửa của Windows.
8.Chọn Tắt Tường lửa Windows và khởi động lại PC của bạn. And see if you’re able to Fix Error code 0x80070035 The network path was not found.
Nếu phương pháp trên không hiệu quả, hãy đảm bảo thực hiện theo các bước tương tự để bật lại Tường lửa của bạn.
Method 2: Delete Hidden Network Adapters
1. Nhấn phím Windows + R rồi gõ devmgmt.msc và nhấn Enter để mở Quản lý thiết bị.
2.Bây giờ hãy chọn Bộ điều hợp mạng và sau đó nhấp vào Xem> Hiển thị thiết bị ẩn.
3.Right-click on each of the hidden devices and select Gỡ cài đặt thiết bị.
4.Do this for all the hidden devices listed under Network Adapters.
5. Khởi động lại PC của bạn để lưu các thay đổi.
Method 3: Turn ON Network Discovery
1. Nhấn phím Windows + X rồi chọn Bảng điều khiển.
2.Now click Network and Internet and then click View network status and tasks.
3.This would take you to Network and Sharing Center, from there click Change Advanced Sharing settings từ menu bên trái.
4.Check mark Bật chức năng khám phá mạng and click Save changes.
5. Khởi động lại PC của bạn để lưu các thay đổi và xem liệu bạn có thể thực hiện được không Fix Error code 0x80070035 The network path was not found.
Method 4: Enable NetBIOS over TCP/IP
1. Nhấn phím Windows + R rồi gõ ncpa.cpl và nhấn Enter.
2.Right-click on your active Wi-Fi or ethernet connection and select Tính chất.
3. chọn 4 Internet Protocol Version (TCP / IPv4) và nhấp vào Thuộc tính.
4.Bây giờ hãy nhấp vào Nâng cao in the next window and then switch to WINS tab under Advanced TCP/IP Settings.
5.Under NetBIOS setting, check mark “Kích hoạt NetBIOS qua TCP / IP“, and then click OK.
6.Reboot your PC to save changes
Method 5: Manually enter all PC’s username and password over the network
1. Nhấn phím Windows + X rồi chọn Bảng điều khiển.
2.Type Chứng chỉ in the control panel search and click on Trình quản lý thông tin xác thực.
3. chọn Giấy chứng nhận Windows và sau đó nhấp vào Add a Windows credential.
4.One by one type the tên người dùng và mật khẩu of each machine connected to the network.
5.Follow this on the PC’s connected to the PC and this will Fix Error code 0x80070035 The network path was not found.
1.Right-click on the drive which you want to be shared and select Tính chất.
2.Chuyển sang Tab chia sẻ and if under Network Path it says Not Shared then click on Advanced Sharing button.
3. Đánh dấu “Chia sẻ thư mục này” and make sure the Share name is correct.
4.Nhấp vào Áp dụng theo sau là OK.
Method 7: Change Network Security settings
1. Nhấn phím Windows + R rồi gõ secpol.msc và nhấn Enter.
2.Navigate to the following path under Local Security Policy window:
Local Policies > Security Options > Network security: LAN Manager authentication level
3. Nhấp đúp chuột vào Network security: LAN Manager authentication level in the right-hand side window.
4.Now from the drop-down, choose Send LM & NTLM-use NTLMv2 session security if negotiated.
5.Nhấp vào Áp dụng theo sau là OK.
Reboot your PC and after the restart see if you are able to Fix Error code 0x80070035 The network path was not found, if not then continue with the next method.
Phương pháp 8: Đặt lại TCP / IP
1. Nhấp chuột phải vào nút Windows và chọn “Dấu nhắc lệnh (Quản trị viên)."
2.Bây giờ gõ lệnh sau và nhấn enter sau mỗi lệnh:
(a) ipconfig/phát hành
(b) ipconfig /flushdns
(c) ipconfig/gia hạn
3.Một lần nữa mở Dấu nhắc lệnh quản trị và nhập thông tin sau rồi nhấn enter sau mỗi thông tin:
- ipconfig / flushdns
- nbtstat –r
- netsh int ip reset
- netsh winsock reset
4. Khởi động lại để áp dụng các thay đổi.
Đề xuất cho bạn:
Thế là bạn đã thành công Fix Error code 0x80070035 The network path was not found nhưng nếu bạn vẫn có bất kỳ câu hỏi nào liên quan đến bài đăng này thì vui lòng hỏi họ trong phần bình luận.