When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Hệ điều hành lỗi thời.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe biểu tượng.
2. If the status is set to Không kết nối, nhấp vào Network globe icon, choose your Wi-Fi network and click on Kết nối button. Make sure Chế độ máy bay không được bật.
3. If you again face the same network connection error code, then click on the Ngắt kết nối button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Nhấp chuột phải vào Biểu tượng Wi-Fi và chọn Open Network & Internet settings.
6. Nhấp vào Wi-Fi.
7. Scroll down the right menu, click on Quản lý các mạng đã biết.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Quên.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Phương pháp 2: Khởi động lại bộ định tuyến
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Lưu ý: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Tìm nút nguồn ở phía sau bộ định tuyến của bạn.
2. Nhấn nút một lần để tắt nó đi.
3. Bây giờ, ngắt kết nối qua một vài thao tác đơn giản về Router power cable và đợi cho đến khi nguồn điện rút hết khỏi tụ điện.
4. Sau đó, kết nối lại các dây cáp điện và bật nó lên sau một phút.
5. Đợi cho đến khi kết nối mạng được thiết lập lại và thử đăng nhập lại.
Cũng đọc: Sửa lỗi máy tính không hiển thị trên mạng trong Windows 10
Phương pháp 3: Chạy trình gỡ rối mạng
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Nhấn vào Chốt cửa sổ và loại Khắc phục sự cố cài đặt trong thanh tìm kiếm và Mở.
2. Nhấp vào Trình gỡ rối bổ sung.
3. Lựa chọn Network Adapter và click vào Chạy trình khắc phục sự cố.
4. Select the network adapter to diagnose và click vào Sau.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, bấm vào Đong chương trinh khăc phục lôi.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Cũng đọc: Sửa lỗi Chia sẻ gia đình YouTube TV không hoạt động
Phương pháp 4: Sửa chữa tệp hệ thống
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (System File Checker) /DISM (Quản lý và phục vụ hình ảnh triển khai) utilities on your Windows 10 PC.
1. Nhấn vào Chốt cửa sổ, kiểu Command Prompt và click vào Run as administrator.
2. Nhấp vào Có trong User Account Control lời nhắc.
3. Kiểu chkdsk C: / f / r / x ra lệnh và đánh Nhập khóa.
4. Nếu bạn được nhắc bằng một tin nhắn, Chkdsk không thể chạy… âm lượng đang… đang trong quá trình sử dụng, sau đó, gõ Y và nhấn Nhập khóa.
5. Một lần nữa gõ lệnh: sfc / scannow và báo chí Nhập khóa để chạy System File Checker quét.
Lưu ý: Quá trình quét hệ thống sẽ được bắt đầu và sẽ mất vài phút để hoàn tất. Trong khi đó, bạn có thể tiếp tục thực hiện các hoạt động khác nhưng lưu ý không vô tình đóng cửa sổ.
Sau khi hoàn tất quá trình quét, nó sẽ hiển thị một trong các thông báo sau:
- Windows Resource Protection không tìm thấy bất kỳ vi phạm tính toàn vẹn nào.
- Bảo vệ tài nguyên Windows không thể thực hiện thao tác được yêu cầu.
- Bảo vệ tài nguyên Windows đã tìm thấy các tệp bị hỏng và sửa chữa chúng thành công.
- Windows Resource Protection đã tìm thấy các tệp bị hỏng nhưng không thể sửa một số tệp trong số đó.
6. Sau khi quá trình quét hoàn tất, khởi động lại máy tính cá nhân của bạn.
7. Một lần nữa, khởi động Lệnh Prompt là quản trị viên và thực hiện lần lượt các lệnh đã cho:
dism.exe / Trực tuyến / cleanup-image / scanhealth dism.exe / Trực tuyến / cleanup-image / restorehealth dism.exe / Trực tuyến / cleanup-image / startcomponentcleanup
Lưu ý: Bạn phải có kết nối Internet đang hoạt động để thực thi các lệnh DISM đúng cách.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Nhấn vào Chốt cửa sổ và loại Device Manager in the Windows search menu. Click on Mở.
2. Mở rộng Card mạng phần bằng cách nhấp đúp vào nó.
3. Nhấp chuột phải vào Trình điều khiển mạng (ví dụ, Intel (R) Dual Band Wireless-AC 3168) Và chọn Vô hiệu hóa thiết bị tùy chọn.
4. Confirm the below prompt by clicking on Có.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Bật thiết bị tùy chọn.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Cũng đọc: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Vào menu tìm kiếm và gõ cmd. Nhấp vào Run as administrator.
2. Nhập thông tin sau lệnh và nhấn Nhập khóa.
netsh winsock reset netsh int ip reset ipconfig / release ipconfig / renew
3. Đợi các lệnh được thực thi và khởi động lại PC của bạn.
Phương pháp 7: Xóa bộ đệm DNS
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Phóng Command Prompt by searching in the Windows thực đơn and click on Run as administrator.
2. Kiểu ipconfig / flushdns in the command window and hit đăng ký hạng mục thi.
Cũng đọc: [SOLVED] Windows detected a hard disk problem
Phương pháp 8: Vô hiệu hóa IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Khởi chạy chạy hộp thoại bằng cách nhấn Phím Windows + R với nhau.
2. Kiểu ncpa.cpl va đanh Nhập khóa.
3. Right-click on your active bộ điều hợp mạng và click vào Bất động sản.
4. Bỏ chọn Giao thức Internet Phiên bản 6 (TCP / IPv6) tùy chọn.
5. Cuối cùng, nhấp vào OK to save the changes and check if the issue is resolved.
Lưu ý: If you use multiple network connections, navigate to Network and Sharing Center và Thay đổi bộ chuyển đổi settings. Right-click on the adapter and select Vô hiệu hoá. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Kiểu Device Manager in the Windows search menu and click Mở.
2. Nhấp đúp vào Card mạng để mở rộng nó.
3. Nhấp chuột phải vào trình điều khiển (ví dụ Intel (R) Dual Band Wireless-AC 3168) và nhấp Cập nhật driver.
4. Nhấp vào Duyệt qua máy tính của tôi để tìm trình điều khiển to locate and install a driver manually.
5. Bấm vào trình duyệt button to choose any directory and click on Sau.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Trình điều khiển tốt nhất cho thiết bị của bạn đã được cài đặt.
6. Nhấp vào Đóng để thoát khỏi cửa sổ.
7. Khởi động lại the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Phóng Device Manager from the Windows search menu.
2. Nhấp chuột phải vào trình điều khiển và chọn Gỡ cài đặt thiết bị.
3. A warning prompt will be displayed on the screen. Check the box “Xóa các phần mềm điều khiển cho thiết bị này” and confirm the prompt by clicking Gỡ bỏ cài đặt.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Ghé thăm trang web của nhà sản xuất.
2. Tìm kiếm và Tải về trình điều khiển tương ứng với phiên bản Windows trên PC của bạn.
3. Once downloaded, double click on the tập tin tải về and follow the given instructions to install it.
Cũng đọc: How to set up a VPN on Windows 10
Phương pháp 10: Cập nhật Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Nhấn nút Windows + tôi phím cùng nhau mở Cài đặt trên máy tính của bạn.
2. Lựa chọn Cập nhật & Bảo mật.
3. Lựa chọn Check for Updates.
4A. Click Cài đặt bây giờ to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Bạn đã cập nhật thông điệp.
Phương pháp 11: Gỡ cài đặt các bản cập nhật gần đây
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Nhấn và giữ Phím Windows + R cùng nhau để mở chạy hộp thoại.
2. Kiểu appwiz.cpl va đanh đăng ký hạng mục thi.
3. Nhấp vào Xem các cập nhật cài đặt.
4. Select the most recent update and click on Gỡ bỏ cài đặt.
5. Confirm the prompt, if any, and khởi động lại PC.
Cũng đọc: Cách khắc phục Firefox không tải trang
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the bộ điều hợp mạng installed in your PC along with their settings. All the stored settings are stored to default settings.
Lưu ý: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Cài đặt sau đó WELFARE và Giới thiệu. Once you have reset your network, you have to reinstall all networking software Lượt thích Máy khách VPN or Công tắc ảo.
1. Nhấn và giữ Các phím Windows + I cùng nhau mở Windows Settings.
2. Nhấp vào Mạng & Internet.
3. Nhấp vào Thiết lập lại mạng Dưới Trạng thái.
4. Xác nhận lời nhắc bằng cách nhấp vào Đặt lại ngay bây giờ.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Đề nghị:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.