Sometimes, when you connect to any limited network, you may end up with No internet, secured prompt. So, when you run Network diagnostics tool, the error code 0x00028001 will prompt on the screen. The most common reason for this error code is your network is being connected to a limited WiFi connection network. If you are also facing network error code 0x00028001, this guide will help you resolve the same. So, continue reading.
How to Fix Network Error 0x00028001 on Windows 10
You may wonder why network error 0x00028001 occurs on cửa sổ 10. Here are some valid reasons that trigger this problem in your device.
- Infrastructure failure of your Windows 10 PC.
- Network connection is very bad.
- The cable connecting the router and the modem are damaged or broken.
- Too many people are connected to the same network.
- Wireless interference between router and your device.
- Outdated network drivers.
In this section, we have gathered some potential fixes that will help you fix 0x00028001 error code. Follow as instructed to attain perfect outcomes.
Lưu ý: Always ensure you create a System restore point to restore your PC if something goes wrong.
Phương pháp khắc phục sự cố cơ bản
Follow the basic troubleshooting steps listed below before going through the advanced methods.
1. Khởi động lại PC
1. Nhấn nút Các phím Alt + F4 cùng nhau để mở Shut Down Windows cửa sổ.
2. Chọn Khởi động lại tùy chọn và nhấn vào Nhập khóa.
2. Ensure Strong Network Signal
You will not face any connectivity issues in your Windows 10 computer only if you have a strong network connection. If there are any obstacles between your router and your computer, they may interfere with the wireless signal and will cause intermittent connection problems.
1. Di chuyển bộ định tuyến của bạn to some other place and check the internet connectivity.
2. Find the signal strength of your network and if it is very low, clear all the obstructions in between the way.
3. Tránh sử dụng quá nhiều thiết bị được kết nối với cùng một mạng.
4. Tránh nhiễu không dây from devices like wireless headphones, head sets, TV and a lot more.
5. Move your PC closer to the router and check if the error recurs again.
3. Khởi động lại bộ định tuyến
This is a simple work around that will help you fix 0x00028001 error code within simple steps. This also ensures a strong and reliable network connection. Follow the below mentioned steps to restart your router. By doing so, you will establish a fresh internet connection between the client and the server. You can restart your router by following our guide Restart Router or Modem. Once your router has restarted, check if you can have fixed the error.
Cũng đọc: Khắc phục lỗi không tìm thấy mạng WiFi trong Windows 10
4. Reconnect to Internet
This is another simple workaround that fixes 0x00028001 error code. Your computer must connect either to Ethernet or to Wi-Fi network at a time. Check if this condition applies to your computer and if you guess any interruptions between your wired and wireless connections, reconnect them as instructed below.
1. Ngắt kết nối your network connection, wait for a while and reconnect it again.
2. Nếu các cáp Ethernet is plugged in, remove it from your PC. Then, reconnect it or connect it to a Wi-Fi network. This will ensure there is no flickering between the wired and wireless connections.
5. Disable Airplane Mode
Enabling Airplane mode will disable WiFi, Bluetooth, cellular mode, all radio services, etc. Thus, you are advised to disable airplane mode to fix 0x00028001 error code. Usually, there is a dedicated key on your keyboard to enable or disable Airplane mode. Hit the key to do the same or implement the below-listed instructions.
1. Nhấn và giữ Phím Windows + A cùng nhau mở Trung tâm hành động. Check if the Chế độ máy bay Được bật.
2A. If Chế độ máy bay is turned on, click on the setting to turn it off.
2B. Nếu Chế độ máy bay is not turned on, skip to the next method.
6. Enable Wi-Fi Connection
Sometimes, if the Wi-Fi adapters are not enabled on your PC, you will face 0x00028001 error code. But, there are a few simple instructions to enable WiFi on your computer.
1. Điều hướng đến chạy hộp thoại bằng cách nhấn Phím Windows + R với nhau.
2. Kiểu ncpa.cpl va đanh Nhập khóa.
3. Now, right-click on your active bộ điều hợp mạng and check whether it is enabled or disabled.
3A. Bấm vào Kích hoạt tính năng if the status is disabled.
3B. Nếu tình trạng is already in Enable, move to the next method.
Check if you have fixed 0x00028001 error code is fixed.
Cũng đọc: How to Troubleshoot Network Connectivity Problems on Windows 10
Method 1: Restart Windows Explorer Process
Some users have reported that restarting Windows Explorer processes will help to resolve 0x00028001 error code. Follow the below-listed instructions to do the same.
1. Nhấn vào Các phím Ctrl + Shift + Esc cùng nhau mở Task Manager.
2. bên trong Quy trình tab, nhấp vào Windows Explorer Và chọn Khởi động lại .
3. Now, Windows Explorer restarts and 0x00028001 error code will be fixed now.
Phương pháp 2: Chạy trình gỡ rối mạng
To fix various internet connectivity issues, you can use the inbuilt tool provided in Windows 10 PC whenever needed. By using the Windows network troubleshooter tool, you can analyze and diagnose any common network-related issues. It is a systematic process, when implemented step by step, will help you fix 0x00028001 error code. Follow our guide How to Troubleshoot Network Connectivity Problems on Windows 10 to learn basic troubleshooting steps to fix all network-related issues by using Windows Network Adapter troubleshooter.
You can use the steps mentioned in the guide to diagnose Wi-Fi connections, Ethernet, and all network adapters in your Windows 10 PC. Finally, check if you have fixed 0x00028001 error code.
Cũng đọc: Cách đặt lại cài đặt mạng trên Windows 10
Method 3: Exit All Background Processes
If there are a bulk of background processes in your Windows 10 computer, you cannot access the network that easy, since all those processes will take a share of the network. Also, RAM consumption will be more and the performance of the device will slow down apparently. Follow our guide How to End Task in Windows 10 to close all other background processes in your Windows 10 PC.
After closing all the background processes, check if 0x00028001 error code is fixed or not.
Phương pháp 4: Sửa chữa tệp hệ thống
If there are any corrupt system files in your Windows Operating system, your PC may face a lot of internet connectivity issues. If you are experiencing 0x00028001 error code very recently, there are some chances that your computer files have become corrupt or damaged. Luckily, your Windows 10 PC has inbuilt repair tools like SFC (System File Checker) and DISM (Deployment Image Servicing and Management) that will help you fix all the corrupt files. Read our guide on How to Repair System Files on Windows 10 and follow the steps as instructed to repair all your corrupt files.
Cũng đọc: Fix Windows 10 Netwtw04.sys Blue Screen Error
Phương pháp 5: Chạy quét phần mềm độc hại
Sudden virus or malware attack will result in network problems in your computer. If in case, the virus attack is very severe, you cannot connect to any network continuously at all. To resolve the problem, you have to remove the virus or malware completely from your Windows 10 computer. You are advised to scan your computer as instructed in our guide How do I Run a Virus Scan on my Computer?
Also, if you want to remove malware in your computer, check our guide How to Remove Malware from your PC in Windows 10.
Phương pháp 6: Cập nhật Windows
You can also eradicate software side bugs in your computer by updating your Operating System. Always ensure if you have updated your Windows Operating System and if there are any updates pending in action, use our guide How to Download and Install Windows 10 Latest Update
After updating your Windows Operating System, check whether you can connect to your network.
Cũng đọc: Sửa lỗi máy tính không hiển thị trên mạng trong Windows 10
Phương pháp 7: Vô hiệu hóa VPN và máy chủ proxy
Sometimes, inappropriate network configurations on your Windows 10 computer, you will face 0x00028001 error code. If you have installed any VPN service or use proxy servers on your PC, read our How to Disable VPN and Proxy on Windows 10 and implement the steps as instructed in the article.
After disabling the VPN client and proxy servers, check if you have fixed 0x00028001 error code. Still, if you face the same problem, try connecting to a điểm phát sóng di động.
Method 8: Reset TCP or IP Protocol
TCP (Transmission Control Protocol) is an essential network connection protocol that allots and identifies quy tắc và Tiêu chuẩn procedures over the internet. TCP/IP protocols are responsible for transferring data packets from the sender and the receiver. If there is a conflict in the process, resetting the protocol along with the IP address will help you fix the discussed issue. Follow our guide on How to Troubleshoot Network Connectivity Problems on Windows 10 to reset TCP/IP.
After implementing the steps, check if you can fix network keeps dropping or not.
Phương pháp 9: Sử dụng DNS của Google
Domain Name System (DNS) addresses are responsible to establish a network connection between the client and server-side. Many technical experts have suggested that using Google DNS addresses helped them to fix 0x00028001 error code. To do so, follow our guide on How to change DNS settings in Windows 10.
Cũng đọc: How to Change DNS Server Settings on Windows 11
Phương pháp 10: Tắt Chế độ tiết kiệm năng lượng
Sometimes, you may face 0x00028001 error code if you have enabled power-saving mode in your Windows 10 computer. This leads to several network connectivity problems. We advise you to disable power saving mode as instructed below.
1. Nhấn vào Chốt cửa sổ, kiểu Device Manager và click vào Mở.
2. Bây giờ, hãy nhấp đúp vào Card mạng phần.
3. Sau đó, nhấp chuột phải vào Bộ điều hợp mạng Và chọn Bất động sản tùy chọn như được hiển thị.
4. Sau đó, chuyển sang Quản lý năng lượng cửa sổ trong Thuộc tính bộ điều hợp mạng window and uncheck the box next to Cho phép máy tính tắt thiết bị này để tiết kiệm năng lượng.
5. Cuối cùng, nhấp vào OK để lưu các thay đổi.
Check if you have your computer is out of network connectivity issues.
Method 11: Enable Essential Services
To avoid and prevent 0x00028001 error code occurring in your PC, few essential services must have active status. When there is a problem with any of these services, you will face several conflicts in connecting to a network. Here are a few instructions to check if the essential services are running on your PC.
1. Kiểu DỊCH VỤ trong hộp tìm kiếm và nhấp vào Mở.
2. Now, scroll down and search for the Windows EventLog dịch vụ.
3. Kiểm tra Trạng thái của dịch vụ.
3A. Nếu Trạng thái được thiết lập để Chạy, right-click on the service and select the Dừng option. Wait for a while and then click on Bắt đầu một lần nữa.
3B. Nếu Trạng thái is không đặt thành Chạy, right-click on the service and select the Bắt đầu tùy chọn.
4. Repeat the above steps for the below dịch vụ cũng có.
- Cuộc gọi thủ tục từ xa (RPC)
- Windows Update
- DHCP Client
- Network Connected Devices Auto-Setup
- Môi giới kết nối mạng
- Network Connections
- Network Connectivity Assistant
- Dịch vụ danh sách mạng
- Nhận thức về vị trí mạng
- Network Setup Service
- Network Store Interface Service
Finally, check if you have fixed the discussed issue.
Cũng đọc: Sửa lỗi Windows không thể tự động phát hiện cài đặt Proxy của Mạng này
Phương pháp 12: Tắt tạm thời phần mềm chống vi-rút (Nếu có)
Some incompatible antivirus programs installed in your computer will cause network error 0x00028001 error code. To avoid conflicts, you must ensure the security settings of your Windows 10 computer and check if they are stable or not. To find whether the antivirus suite is the reason for network keeps dropping issue, disable it once and try connecting to a network. Read our guide on How to Disable Antivirus Temporarily on Windows 10 and follow the instructions to disable your Antivirus program temporarily on your PC.
If you did not face any internet connectivity issues after disabling the antivirus program in your computer, you are advised to uninstall the program completely from your PC. Read our guide Force Uninstall Programs which won’t Uninstall In Windows 10 to uninstall your antivirus program in your computer.
Phương pháp 13: Vô hiệu hóa Tường lửa của Bộ bảo vệ Windows (Không được khuyến nghị)
Like antivirus program, Windows Defender Firewall in your computer might prevent internet access, for some security reasons. If in case, WiFi network has been blocked by Windows Defender Firewall, you have to enable it or disable the Firewall securities temporarily from your computer. If you do not know how to disable Windows Defender Firewall, our guide How to Disable Windows 10 Firewall will help you do so.
Phương pháp 14: Cập nhật trình điều khiển mạng
Always ensure if you are using updated network drivers and if there are any updates pending in action, you are advised to download and install the same. Follow our guide on How to Update Network Adapter Drivers on Windows 10 to do so. Once you have updated your network driver, khởi động lại your computer and test the network connection. You will not 0x00028001 error code again.
Cũng đọc: Sửa lỗi Ethernet không có lỗi cấu hình IP hợp lệ
Method 15: Reinstall Network Driver
Still, if you face 0x00028001 error code even after updating network drivers, there is another fix to delete all the drivers in your computer and reinstall them again. This process stabilizes the network connectivity problems thereby resolving network keeps disconnecting Windows 10 issue. Follow our guide How to Uninstall and Reinstall Drivers on Windows 10 to reinstall drivers in your Windows 10 computer.
After reinstalling network drivers, check if you can connect to the network without any problems.
Method 16: Roll Back Network Drivers
All the current versions drivers will be deleted from your PC and previous version of them will be installed when you roll back your network drivers. This is a helpful feature when any new driver is incompatible with the system. Follow the steps as instructed in our guide How to Rollback Drivers on Windows 10 to fix 0x00028001 error code.
After your Windows 10 computer has installed the previous version of drivers, check if can connect to the network without any interruptions.
Phương pháp 17: Đặt lại cài đặt mạng
Several users have declared that, resetting network settings will resolve strange network connection issues. This method will forget all the network configuration settings, saved credentials, and a lot more security software like VPN and antivirus programs. To do so, follow our guide on How to Reset Network Settings on Windows 10
Cũng đọc: How to Setup Network Files Sharing on Windows 10
Phương pháp 18: Thực hiện Khôi phục Hệ thống
If you have recently updated your Windows 10 operating system and later facing network error 0x00028001 error code, the latest Windows update components may interfere with any software present in your computer and may cause network keeps disconnecting Windows 10 issue. So, in this case, you must restore your computer to the previous version when it was working fine. To do so, follow our guide on How to use System Restore on Windows 10 and implement the instructions as demonstrated.
After restoring your Windows 10 PC, check if you can connect to any network without any problems.
Phương pháp 19: Đặt lại PC
If none of the methods have helped you fix 0x00028001 error code, then you have to clean install your Windows Operating System. To clean boot your computer, implement the steps as instructed in our guide How to do a Clean Install of Windows 10
Method 20: Contact Internet Service Provider
Last but not the least, you have to seek for technical support if above-listed methods fail to resolve network error 0x00028001 error. If your modem does not communicate with your Internet Service Provider, a lot more technical connectivity problems arise in your device.
For instance, when you try to register your modem but face troubles during the process, several authentication attempts will slow down your network connection. This will lead to 0x00028001 error. So, in this case you have to contact your Internet Service Provider to diagnose and resolve the problem. The Internet Service Providers will check whether the devices are updated, compatible and properly registered.
Đề nghị:
Chúng tôi hy vọng rằng hướng dẫn này hữu ích và bạn có thể khắc phục network error 0x00028001 in Windows 10. Let us know what you want to learn about next. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.