After installing the latest Windows feature update, your PC may be trapped in an automated repair cycle. This article will give you various troubleshooting techniques if you’re attempting to locate a repair approach that will allow you to resolve diagnosing your PC Windows 10 issue. So, continue reading to fix diagnosing your PC stuck issue on Windows 10.
How to Fix Stuck on Diagnosing your PC in Windows 10
We looked into this diagnosing your PC stuck issue by looking at multiple user reports and tried various repair strategies suggested by some impacted users. As it turns out, various conditions make your system trapped inside the diagnosing your PC screen. Here’s a list of circumstances that might lead to this issue on cửa sổ 10.
- Tệp hệ thống bị hỏng: Corrupted system files might also cause the System Diagnostic tool to appear at every system start-up. If this utility is also corrupted, it will be stuck in a loop.
- Inadequate System Space: As it turns out, this problem of this issue can also arise when the system lacks sufficient storage capacity to load all the programs and services required for the starting operation.
- Glitched Automated Repair Utility: This issue has been reported by multiple customers to be caused by mysterious system drive troubles. In this instance, the Automatic Repair program will try to open at every restart in an attempt to fix the problem, but it will be unable to locate the source of the problem.
- Faulty BCD Data: Corrupted booting data might also cause this issue in severe conditions, which prevents the starting process from finishing.
Some afflicted customers have attempted rebooting their computers to get rid of this problem but have claimed that their computers go into a dark screen, show the logo, and then return to the Diagnostic PC page. The operating system indicates that your device has been diagnosed, but there might be no progress made. You can follow the below methods to resolve the issue.
Method 1: Perform Hard Reboot
You can do a hard reboot if your Windows is unable to boot due to the Preparing Automatic Repair or Diagnosing your PC issue.
1. Rút phích cắm AC bộ chuyển đổi và loại bỏ ắc quy từ thiết bị.
2. Check if it boots up normally by pressing and holding the nút nguồn cho 20 giây.
If this technique fails, try one of the following options.
Cũng đọc: Cách sửa lỗi WDF_VIOLATION trong Windows 10
Phương pháp 2: Khởi động ở Chế độ an toàn và Xóa không gian
As some users have discovered, this issue can also occur when the system does not have enough capacity to start. Several individuals in a similar position have overcome the problem by running their machines in Safe Mode and freeing up some space. Follow our guide on How to Boot to Safe Mode in Windows 10.
Then, perform Disk cleanup by following our guide to run Disk Cleanup.
If diagnosing your PC Windows 10 problem persists, follow the next procedure below.
Phương pháp 3: Sửa chữa tệp hệ thống
It’s also possible that this problem is caused by System File corruption. These corrupted files might prevent the booting procedure from finishing. You’ll have to run the scans before the Booting phase since you can’t go beyond the Diagnostics page. Read our guide on How to Repair System Files on Windows 10.
Cũng đọc: Sửa máy tính không đồng bộ lại vì không có dữ liệu thời gian
Method 4: Run System Restore Utility
You may be dealing with a serious corruption problem that can’t be treated traditionally. When faced with a circumstance like this, the best action is to take a damage-control strategy. Most start-up troubles caused by system file corruption can be resolved by returning the machine to a healthy condition in which all components are working properly. Follow the below steps.
1. Chèn đĩa cài đặt và khởi động lại máy tính của bạn.
2. Nhấn bất kỳ chính to start up the installation media when you see the booting screen.
3. When Windows Setup has finished loading, click on Sửa chữa máy tính của bạn.
4. Truy cập Khắc phục sự cố menu from the first repair menu.
5. Nhấp vào Tùy chọn nâng cao from the Troubleshoot menu.
6. Sau đó nhấp vào Command Prompt from the list of available utilities.
7. Để mở Khôi phục hệ thống program, type the rstrui.exe lệnh vào Command Prompt cửa sổ và nhấn Nhập khóa.
8. Nhấp vào Sau once you’ve reached the first screen.
9. Bây giờ, đánh dấu the option labeled Hiện tất cả các điểm khôi phục.
10. Once you’ve done so, go through each restoration ảnh chụp and pick one taken before the Diagnostics problem.
11. To go on to the next option, choose the suitable hình chụp và click vào Sau.
12. Bây giờ, hãy nhấp vào Kết thúc.
Your system will restart automatically after restoring, and the old machine will be fixed at the next system starting.
Method 5: Rebuild BCD
In Windows 10, you’ll get the Preparing Automatic Repair error if the boot files are missing or damaged. As a result, some users will re-build the boot record using the procedures below.
1. Insert the Windows bootable installation CD into the PC displaying the error message Preparing Automatic Repair or Diagnosing your PC.
2. Start your computer by booting from the cài đặt đĩa CD.
3. To continue, choose your Ngôn ngữ cài đặt và nhấp vào Sau .
4. Lựa chọn Sửa chửa máy tính của bạn.
5. Lựa chọn Khắc phục sự cố.
6. Lựa chọn Command Prompt.
7. Enter the instructions below into the prompt, and press the Nhập khóa sau mỗi người
bootrec / Fixmbr bootrec / Fixboot bootrec / scanos bootrec / RebuildBcd
8. Then, type the command ra và nhấn Nhập khóa.
9. Cuối cùng, khởi động lại PC.
Cũng đọc: Cách khắc phục lỗi cập nhật Windows 80072ee2
Phương pháp 6: Tắt sửa chữa khởi động tự động
If this happens, the Automatic Start-up Repair software will launch at every system start-up. However, if the utility is broken, you might not be able to go past the start-up screen. Therefore, disabling this software would prevent the Diagnosing your PC screen from appearing.
1. As soon as you see the introductory screen, press the F8 key repeatedly to get to the Advanced Boot Options đơn.
2. Lựa chọn Chế độ an toàn với mạng from the Advanced Boot Options menu by pressing the Phím F5 or using the arrow keys.
3. When the booting routine is complete, press Các phím Windows + I để khởi động Chạy hộp thoại.
4. Kiểu cmd va đanh Ctrl + Shift + Enter phím to open an nâng cao Command Prompt.
5. Nhấp vào Có trong lời nhắc.
6. Nhập thông tin sau lệnh và báo chí Nhập khóa.
bcdedit / set recoveryenabled NO
7. Once the process is complete, khởi động lại thiết bị của bạn.
If diagnosing your PC Windows 10 problem persists or you don’t get a different error, continue the next procedure.
Method 7: Uninstall Updates
If the update fails to install properly on your device, you might face this issue. Follow the below steps to resolve the discussed issue.
1. Nhấn vào Chốt cửa sổ và loại Bảng điều khiển, sau đó bấm vào Mở.
2. Bây giờ, hãy nhấp vào Gỡ bỏ cài đặt một chương trình tùy chọn theo Khóa Học thực đơn như mô tả.
3. Bây giờ, hãy nhấp vào Xem các cập nhật cài đặt ở khung bên trái như được hiển thị.
4. Bây giờ, hãy tìm kiếm và chọn bản cập nhật mới nhất bằng cách tham khảo Được cài đặt trên ngày và nhấp vào Gỡ bỏ cài đặt tùy chọn như hình dưới đây.
5. Cuối cùng, xác nhận mọi lời nhắc và khởi động lại PC.
Check if diagnosing your PC stuck issue persists or not.
Cũng đọc: 7 cách khắc phục lỗi BSOD iaStorA.sys trên Windows 10
Method 8: Perform Repair Install
If none of the above-mentioned repair methods have worked, you’re probably dealing with a serious case of system corruption that can’t be fixed using normal methods. In this case, the only way to repair the problem is to reset every Windows component, including any booting-related tasks causing the Automatic Repair loop. You may always perform a clean installation but bear in mind that doing so will lose any saved data within your Windows system. If you choose a clean install, all your personal data, applications, games, documents, and other media will disappear. Read our guide on How to do a Clean Install of Windows 10 and implement the same.
Đề nghị:
We hope you found this information useful and that you were able to resolve stuck on diagnosing your PC in Windows 10 problem. Please let us know which technique was the most beneficial for you. Please use the form below if you have any queries or comments. Also, let us know what you want to learn next.