Fix USB Error Code 52 Windows cannot verify the digital signature: If you have recently installed Windows Updates or upgraded Windows then it’s possible that your USB ports will not recognize any hardware that is connected to them. In fact, if you will dig further you will find out the following error message in Device Manager:
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
Error Code 52 indicates a driver failure and in device manager, you will see a yellow exclamation mark next to each USB icon. Well, there is no particular cause for this error but a number of reasons are responsible such as Corrupted Drivers, Secure boot, Integrity check, problematic filters for USB etc. So without wasting any time let’s see how to actually Fix USB Error Code 52 Windows cannot verify the digital signature with the help of below-listed troubleshooting guide.
Fix USB Error Code 52 Windows cannot verify the digital signature
Đảm bảo tạo điểm khôi phục đề phòng trường hợp xảy ra sự cố.
Method 1: Delete USB UpperFilter and LowerFilter Registry Entries
Lưu ý: Backup the registry just in case something goes wrong.
1. Nhấn phím Windows + R rồi gõ regedit và nhấn Enter để mở Registry Editor.
2.Navigate to the following the Registry Key:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{36FC9E60-C465-11CF-8056-444553540000}
3. Đảm bảo chọn {36FC9E60-C465-11CF-8056-444553540000} and then in the right window pane find UpperFilters và LowerFilters.
4. Nhấp chuột phải vào từng mục và chọn Xóa.
5. Khởi động lại PC của bạn để lưu các thay đổi.
Phương pháp 2: Chạy Khôi phục Hệ thống
1. Nhấn phím Windows + R và gõ”sysdm.cpl” sau đó nhấn enter.
2. chọn Bảo vệ hệ thống tab và chọn Khôi phục hệ thống.
3.Click Next và chọn mong muốn Điểm khôi phục hệ thống.
4.Làm theo hướng dẫn trên màn hình để hoàn tất quá trình khôi phục hệ thống. Và xem liệu bạn có thể Fix USB Error Code 52 Windows cannot verify the digital signature, nếu không thì hãy tiếp tục với các phương pháp được liệt kê bên dưới.
Method 3: Disable Secure Boot
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.Find the Secure Boot setting, and if possible, set it to Enabled. This option is usually in either the Security tab, the Boot tab, or the Authentication tab.
#CẢNH BÁO: Sau khi tắt Khởi động an toàn, có thể khó kích hoạt lại Khởi động an toàn mà không khôi phục PC của bạn về trạng thái xuất xưởng.
3.Restart your PC and see if you’re able to Fix USB Error Code 52 Windows cannot verify the digital signature.
Method 4: Disable Driver Signature Enforcement
For Windows 10 user’s, interpret the Windows booting process 3 times to boot into recovery mode or else you could try the following:
1.Go to the Login screen where you see the above error message then click on nút nguồn sau đó giữ sự thay đổi và click vào Khởi động lại (while holding the shift button).
2. Đảm bảo bạn không buông nút Shift cho đến khi bạn nhìn thấy Menu Tùy chọn khôi phục nâng cao.
3.Bây giờ hãy điều hướng đến mục sau trong menu Tùy chọn khôi phục nâng cao:
Khắc phục sự cố > Tùy chọn nâng cao > Cài đặt khởi động > Khởi động lại
4. Sau khi bạn nhấp vào Khởi động lại, PC của bạn sẽ khởi động lại và bạn sẽ thấy màn hình màu xanh lam với danh sách các tùy chọn, đảm bảo nhấn phím số bên cạnh tùy chọn có nội dung “Disable driver signature enforcement."
5.Now Windows will boot again and once logged into Windows press Windows Key + R then type devmgmt.msc và nhấn Enter để mở Trình quản lý thiết bị.
6.Right-click on the problematic device (which has a yellow exclamation mark next to it) and select Update Driver.
7.Chọn “Tự động tìm kiếm phần mềm trình điều khiển được cập nhật."
8.Repeat the above process for every problematic device listed in Device Manager.
9. Khởi động lại PC của bạn để lưu các thay đổi và xem liệu bạn có thể thực hiện được không Fix USB Error Code 52 Windows cannot verify the digital signature.
Method 5: Uninstall Problematic devices
1. Nhấn phím Windows + R rồi gõ devmgmt.msc và nhấn Enter.
2. Nhấp chuột phải vào each of problematic device (yellow exclamation mark next to it) and select Gỡ bỏ cài đặt.
3.Click Yes/OK to continue with uninstallation.
4. Khởi động lại PC của bạn để lưu các thay đổi.
Method 6: Delete usb*.sys Files
1.Take Ownership of the files C:Windowssystem32driversusbehci.sys and C:Windowssystem32driversusbhub.sys through any one of the listed methods here.
2.Rename the usbehci.sys and usbhub.sys tập tin để usbehciold.sys & usbhubold.sys.
3. Nhấn phím Windows + R rồi gõ devmgmt.msc và nhấn Enter.
4.Mở rộng Bộ điều khiển Bus nối tiếp đa năng và sau đó nhấp chuột phải vào Standard Enhanced PCI to USB Host Controller và chọn Gỡ bỏ cài đặt.
5.Reboot your PC and new drivers will be automatically installed.
Method 7: Run CHKDSK and SFC
1.Press Windows Key + X then click on Command Prompt(Admin).
2. Bây giờ hãy nhập nội dung sau vào cmd và nhấn enter:
Sfc /scannow sfc /scannow /offbootdir=c: /offwindir=c:windows
3. Đợi quá trình trên kết thúc và sau khi hoàn tất, hãy khởi động lại PC của bạn.
4.Tiếp theo, chạy CHKDSK từ đây Sửa lỗi hệ thống tệp bằng tiện ích kiểm tra đĩa (CHKDSK).
5.Hãy để quá trình trên hoàn tất và khởi động lại PC của bạn để lưu các thay đổi.
Xem liệu bạn có thể Fix USB Error Code 52 Windows cannot verify the digital signature, if not then follow the next method.
Method 8: Disable Integrity Checks
1. Nhấn phím Windows + X rồi chọn Dấu nhắc lệnh (Quản trị viên).
2. Nhập lệnh sau vào cmd và nhấn Enter sau mỗi lệnh:
bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit -set KIỂM TRA ĐĂNG KÝ BẬT
3.If the above command doesn’t work then try the following:
bcdedit /deletevalue loadoptions
bcdedit -set TẮT ĐĂNG KÝ
4. Khởi động lại PC của bạn để lưu các thay đổi.
Đề xuất cho bạn:
Thế là bạn đã thành công Fix USB Error Code 52 Windows cannot verify the digital signature nhưng nếu bạn vẫn có bất kỳ câu hỏi nào liên quan đến hướng dẫn này thì vui lòng hỏi họ trong phần bình luận.