Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Reboot and Select Proper Boot Device Issue [SOLVED]
Method 1: Set Correct Boot Order
You may be seeing the error “Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1.Khi máy tính của bạn khởi động (Trước màn hình khởi động hoặc màn hình lỗi), nhấn liên tục phím Xóa hoặc phím F1 hoặc F2 (Tùy thuộc vào nhà sản xuất máy tính của bạn) để vào thiết lập BIOS.
2.Khi bạn đã thiết lập BIOS, hãy chọn tab Khởi động từ danh sách tùy chọn.
3.Bây giờ hãy đảm bảo rằng máy tính Đĩa cứng hoặc SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.
4.Finally, press F10 to save this change and exit. This must have Fix Reboot and Select Proper Boot Device Issue, nếu không thì tiếp tục.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Để chạy Chẩn đoán, hãy khởi động lại PC của bạn và khi máy tính khởi động (trước màn hình khởi động), hãy nhấn phím F12 và khi menu Khởi động xuất hiện, hãy đánh dấu tùy chọn Khởi động vào phân vùng tiện ích hoặc tùy chọn Chẩn đoán và nhấn enter để khởi động Chẩn đoán. Điều này sẽ tự động kiểm tra tất cả phần cứng trong hệ thống của bạn và sẽ báo cáo lại nếu tìm thấy bất kỳ vấn đề nào.
Đề nghị: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
Quan trọng: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1. Đưa DVD cài đặt có khả năng khởi động Windows 10 và khởi động lại PC của bạn.
2.Khi được nhắc Nhấn phím bất kỳ để khởi động từ CD hoặc DVD, hãy nhấn phím bất kỳ để tiếp tục.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.Khởi động lại là bạn đã thành công Fix Reboot and Select Proper Boot Device issue, if not, continue.
Ngoài ra, hãy đọc Cách khắc phục Sửa chữa tự động không thể sửa chữa PC của bạn.
Phương pháp 5: Kích hoạt tính năng khởi động UEFI
1. Khởi động lại PC của bạn và nhấn F2 hoặc DEL tùy theo PC của bạn để mở Boot Setup.
2.The make the following changes:
Thay đổi tùy chọn Danh sách khởi động thành UEFI Tắt tùy chọn Tải kế thừa ROM Bật Khởi động an toàn
3.Tiếp theo, nhấn F10 để Lưu và Thoát khỏi thiết lập khởi động.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
Lưu ý: Always mark the System Reserved Partition (generally 100mb) active and if you don’t have a System Reserved Partition then mark C: Drive as the active partition.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
Cách 7: Sửa chữa Cài đặt Windows 10
Nếu không có giải pháp nào ở trên phù hợp với bạn thì bạn có thể chắc chắn rằng ổ cứng của bạn vẫn ổn nhưng có thể bạn đang gặp lỗi “Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” bởi vì hệ điều hành hoặc thông tin BCD trên HDD đã bị xóa bằng cách nào đó. Chà, trong trường hợp này, bạn có thể thử Sửa chữa cài đặt Windows nhưng nếu điều này cũng không thành công thì giải pháp duy nhất còn lại là Cài đặt một bản sao Windows mới (Cài đặt sạch).
Thế là bạn đã thành công Sửa chữa Reboot and Select proper Boot device issue nhưng nếu bạn vẫn có bất kỳ câu hỏi nào liên quan đến bài đăng này, vui lòng hỏi họ trong phần bình luận.