When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- אַוטדייטיד אַפּערייטינג סיסטעם.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe בילדל.
2. If the status is set to ניט פארבונדן, דריקט אויף די Network globe icon, choose your Wi-Fi network and click on פאַרבינדן button. Make sure אַעראָפּלאַן מאָדע איז נישט פארקערט אויף.
3. If you again face the same network connection error code, then click on the דיסקאַנעקט button, wait for some time and reconnect it again.
4. Try connecting to a different ווי-פי network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. רעכט גיט אויף די Wi-Fi בילדל און אויסקלייַבן Open Network & Internet settings.
קסנומקס. דריקט אויף ווי-פי.
7. Scroll down the right menu, click on פירן באקאנט נעטוואָרקס.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select פארגעס.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
אופֿן 2: ריסטאַרט ראַוטער
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
נאטיץ: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. געפֿינען די מאַכט קנעפּל אויף די צוריק פון דיין ראַוטער.
2. דרוק דעם קנעפּל אַמאָל צו לעש עס אויס.
3. איצט, דיסקאַנעקט אייער Router power cable און וואַרטן ביז די מאַכט איז גאָר ויסגעשעפּט פון די קאַפּאַסאַטערז.
4. דערנאָך, ריקאַנעקט די מאַכט קאַבלע און באַשטימען עס נאָך אַ מינוט.
5. וואַרטן ביז די נעץ קשר איז שייַעך-געגרינדעט און פּרוּווט זיך ווידער איינשרייבן.
אויך לייענען: פאַרריכטן קאָמפּיוטערס וואָס זענען נישט געוויזן אויף די נעץ אין Windows 10
אופֿן 3: לויפן נעץ טראָובלעשאָאָטער
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. שלאָגן די Windows key און טיפּ טראָובלעשאָאָט סעטטינגס אין די זוכן באַר און Open.
קסנומקס. דריקט אויף נאָך טראָובלעשאָאָטערס.
3. אויסקלייַבן נעטוואָרק אַדאַפּטער און גיט אויף לויפן די טראָובלעשאָאָט.
4. Select the network adapter to diagnose און גיט אויף ווייַטער.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, גיט אויף נאָענט די טראָובלעשאָאָטער.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
אויך לייענען: פאַרריכטן משפּחה ייַנטיילונג יאָוטובע טעלעוויזיע ניט ארבעטן
אופֿן 4: פאַרריכטן סיסטעם טעקעס
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (סיסטעם טעקע טשעקער) /DISM (דיפּלוימאַנט בילד סערוויסינג און מאַנאַגעמענט) utilities on your Windows 10 PC.
1. שלאָגן די Windows key, טיפּ Command Prompt און גיט אויף ראַן ווי אַדמיניסטראַטאָר.
קסנומקס. דריקט אויף יאָ אין די באַניצער אַקאַונט קאָנטראָל prompt.
3. טיפּ chkdsk C: / f / r / x באַפֿעלן און שלאָגן אַרייַן שליסל.
4. אויב איר זענט פּראַמפּטיד מיט אַ אָנזאָג, טשקדסק קען נישט לויפן ... דער באַנד איז ... אין נוצן פּראָצעס, דעמאָלט, טיפּ Y און שלאָגן די אַרייַן שליסל.
5. ווידער, טיפּ די באַפֿעל: sfc / scannow און דרוקן אַרייַן שליסל צו לויפן די סיסטעם טעקע טשעקער יבערקוקן.
נאטיץ: א סיסטעם יבערקוקן וועט זיין ינישיייטיד און עס וועט נעמען אַ פּאָר פון מינוט צו ענדיקן. דערווייַל, איר קענען פאָרזעצן צו דורכפירן אנדערע אַקטיוויטעטן אָבער זיין מיינדאַד צו נישט אַקסאַדענאַלי פאַרמאַכן די פֿענצטער.
נאָך קאַמפּליטינג די יבערקוקן, עס וועט ווייַזן איינער פון די אַרטיקלען:
- Windows ריסאָרס פּראַטעקשאַן געפֿונען קיין אָרנטלעכקייַט ווייאַליישאַנז.
- Windows Resource Protection קען נישט דורכפירן די געבעטן אָפּעראַציע.
- Windows Resource Protection געפֿונען פאַרדאָרבן טעקעס און ריפּערד זיי.
- Windows Resource Protection געפונען פאַרדאָרבן טעקעס אָבער קען נישט פאַרריכטן עטלעכע פון זיי.
6. אַמאָל די יבערקוקן איז פאַרטיק, ריסטאַרט דיין פּיסי.
7. ווידער, קאַטער באַפֿעל פּינטלעך ווי אַדמיניסטראַטאָר און דורכפירן די געגעבן קאַמאַנדז איינער נאָך די אנדערע:
dism.exe / אָנליין / cleanup-image / scanhealth dism.exe / אָנליין / cleanup-image /restorehealth dism.exe / אָנליין / cleanup-image / startcomponentcleanup
נאטיץ: איר מוזן האָבן אַ ארבעטן אינטערנעט פֿאַרבינדונג צו ויספירן DISM קאַמאַנדז רעכט.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. שלאָגן די Windows key און טיפּ דיווייס מאַנאַגער in the Windows search menu. Click on עפענען.
2. עקספּאַנד די נעץ אַדאַפּטערז אָפּטיילונג דורך טאָפּל-קליקינג אויף עס.
3. רעכט גיט אויף דיין נעץ שאָפער (למשל, Intel (R) Dual Band Wireless-AC 3168) און סעלעקטירן דעם דיסאַבלע מיטל אָפּציע.
4. Confirm the below prompt by clicking on יאָ.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the געבן מיטל אָפּציע.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
אויך לייענען: פאַרריכטן Windows קען נישט אויטאָמאַטיש דעטעקט די פּראַקסי סעטטינגס פון דעם נעץ
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. גיין צו די זוכן מעניו און טיפּ קמד. דריקט אויף ראַן ווי אַדמיניסטראַטאָר.
2. טיפּ די פאלגענדע קאַמאַנדז און שלאָגן די אַרייַן שליסל.
נעטש ווינסאָקק באַשטעטיק נעטש ינט יפּ באַשטעטיק יפּקאָנפיג / מעלדונג ipconfig / renew
3. וואַרטן פֿאַר די קאַמאַנדז צו זיין עקסאַקיוטאַד און רעבאָאָט דיין פּיסי.
אופֿן 7: ויסשעפּן דנס קאַש
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Launch Command Prompt by searching in the פֿענצטער מעניו and click on Run as administrator.
2. טיפּ ipconfig / flushdns in the command window and hit אַרייַן.
אויך לייענען: [SOLVED] Windows detected a hard disk problem
אופֿן 8: דיסייבאַל IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. קאַטער די לויפן דיאַלאָג קעסטל דורך דרינגלעך Windows + R שליסלען צוזאַמען.
2. טיפּ ncpa.cpl און שלאָגן אַרייַן שליסל.
3. Right-click on your active נעץ אַדאַפּטער און גיט אויף פּראָפּערטיעס.
4. ונטשעקק די אינטערנעט פּראָטאָקאָל ווערסיע 6 (TCP / IPv6) אָפּציע.
5. צום סוף, גיט אויף OK to save the changes and check if the issue is resolved.
נאטיץ: If you use multiple network connections, navigate to נעטוואָרק און ייַנטיילונג צענטער און טוישן אַדאַפּטער settings. Right-click on the adapter and select דיסייבאַל. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. טיפּ דיווייס מאַנאַגער in the Windows search menu and click עפענען.
2. טאָפּל גיט אויף די נעץ אַדאַפּטערז צו יקספּאַנד עס.
3. רעכט גיט אויף דיין שאָפער (למשל ינטעל(ר) צווייענדיק באַנד ווירעלעסס-אַק 3168) און גיט דערהייַנטיקן דרייווער.
קסנומקס. דריקט אויף בלעטער מיין קאָמפּיוטער פֿאַר דריווערס to locate and install a driver manually.
5. דריקט אויף די בלעטערער button to choose any directory and click on ווייַטער.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, די בעסטער דריווערס פֿאַר דיין מיטל זענען שוין אינסטאַלירן.
קסנומקס. דריקט אויף נאָענט צו אַרויסגאַנג די פֿענצטער.
7. הייב אן נאכאמאל the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Launch דיווייס מאַנאַגער from the Windows search menu.
2. רעכט גיט אויף די שאָפער און אויסקלייַבן נעם אַוועק מיטל.
3. A warning prompt will be displayed on the screen. Check the box “אַראָפּנעמען די שאָפער פֿאַר דעם מיטל” and confirm the prompt by clicking נעם אַוועק.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. באַזוכן די פאַבריקאַנט וועבזייטל.
2. געפינען און דאַונלאָוד די דריווערס קאָראַספּאַנדינג צו די Windows ווערסיע אויף דיין פּיסי.
3. Once downloaded, double click on the דאַונלאָודיד טעקע and follow the given instructions to install it.
אויך לייענען: How to set up a VPN on Windows 10
אופֿן 10: דערהייַנטיקן Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. דרוק די Windows + איך שליסלען צוזאַמען צו עפענען סעטטינגס אויף דיין קאָמפּיוטער.
2. אויסקלייַבן דערהייַנטיקן & זיכערהייט.
3. אויסקלייַבן זוך נייע ווערסיעס.
4A. Click ינסטאַלירן איצט צו אָפּלאָדירן און ינסטאַלירן די לעצטע דערהייַנטיקן בנימצא.
4ב. אויב דיין סיסטעם איז שוין דערהייַנטיקט, עס וועט זיין געוויזן איר זענט דערהייַנטיקט message.
אופֿן 11: נעם אַוועק לעצטע דערהייַנטיקונגען
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. דרוק און האַלטן Windows + R שליסלען צוזאַמען צו עפענען די לויפן דיאַלאָג קעסטל.
2. טיפּ appwiz.cpl און שלאָגן אַרייַן.
קסנומקס. דריקט אויף View אינסטאַלירן דערהייַנטיקונגען.
4. Select the most recent update and click on נעם אַוועק.
5. Confirm the prompt, if any, and רעבאָאָט די פּיסי.
אויך לייענען: ווי צו פאַרריכטן Firefox ניט לאָודינג בלעטער
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the נעץ אַדאַפּטערז installed in your PC along with their settings. All the stored settings are stored to default settings.
נאטיץ: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to סעטטינגס דעמאָלט סיסטעם און וועגן. Once you have reset your network, you have to reinstall all networking software ווי VPN קלייאַנץ or ווירטואַל סוויטשיז.
1. דרוק און האַלטן Windows + I שליסלען צוזאַמען צו עפענען Windows Settings.
קסנומקס. דריקט אויף נעץ & אינטערנעט.
קסנומקס. דריקט אויף נעץ באַשטעטיק ונטער מאַצעוו.
4. באַשטעטיקן די פּינטלעך דורך געבן אַ קליק אויף באַשטעטיק איצט.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
רעקאַמענדיד:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.