Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
רעבאָאָט און אויסקלייַבן די רעכט שטיוול מיטל אַרויסגעבן [סאַלווד]
אופֿן 1: שטעלן די ריכטיק שטיוול סדר
איר קען זען דעם טעות "Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1. ווען דיין קאָמפּיוטער סטאַרץ (איידער די שטיוול פאַרשטעלן אָדער דער טעות פאַרשטעלן), דריקן ריפּיטידלי ויסמעקן אָדער F1 אָדער F2 שליסל (דיפּענדינג אויף דיין קאָמפּיוטער ס פאַבריקאַנט) אַרייַן בייאָוס סעטאַפּ.
2. אַמאָל איר זענט אין בייאָוס סעטאַפּ אויסקלייַבן שטיוול קוויטל פון דער רשימה פון אָפּציעס.
3.נאָוו מאַכן זיכער אַז די קאָמפּיוטער שווער דיסק אָדער SSD איז באַשטימט ווי אַ שפּיץ בילכערקייַט אין די שטיוול סדר. אויב ניט, נוצן אַרויף אָדער אַראָפּ פייַל קיז צו שטעלן שווער דיסק אין די שפּיץ, וואָס מיטל אַז דער קאָמפּיוטער וועט ערשטער שטיוול פֿון עס אלא ווי קיין אנדערע מקור.
4.פינאַללי, דריקן F10 צו ראַטעווען דעם ענדערונג און אַרויסגאַנג. דאס מוז האבן Fix Reboot and Select Proper Boot Device Issue, אויב נישט דעמאָלט פאָרזעצן.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
צו לויפן דיאַגנאָסטיקס ריסטאַרט דיין פּיסי און ווען די קאָמפּיוטער סטאַרץ (איידער די שטיוול פאַרשטעלן), דריקן די F12 שליסל און ווען די שטיוול מעניו איז ארויס, הויכפּונקט די Boot to Utility Partition אָפּציע אָדער די דיאַגנאָסטיקס אָפּציע און דריקן אַרייַן צו אָנהייבן די דיאַגנאָסטיקס. דאָס וועט אויטאָמאַטיש קאָנטראָלירן אַלע די ייַזנוואַרג פון דיין סיסטעם און וועט באַריכט צוריק אויב קיין פּראָבלעם איז געפֿונען.
רעקאַמענדיד: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
וויכטיק: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1.ינסערט די Windows 10 באָאָטאַבלע ינסטאַלירונג ווי און ריסטאַרט דיין פּיסי.
2. ווען פּראַמפּטיד צו דריקן קיין שליסל צו שטיוול פון סי אָדער ווי, דריקן קיין שליסל צו פאָרזעצן.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.ריסטאַרט און איר האָבן הצלחה Fix Reboot and Select Proper Boot Device issue, אויב נישט, פאָרזעצן.
אויך, לייענען ווי צו פאַרריכטן אָטאַמאַטיק ריפּער קען נישט פאַרריכטן דיין פּיסי.
אופֿן 5: געבן UEFI שטיוול
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.The make the following changes:
טוישן די שטיוול רשימה אָפּציע צו UEFI דיסייבאַל לאָדן לעגאַסי אָפּציע ראַם געבן זיכער שטיוול
3. ווייַטער, צאַפּן F10 צו היט און אַרויסגאַנג די שטיוול סעטאַפּ.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
נאטיץ: שטענדיק צייכן די סיסטעם רעזערווירט צעטיילונג (בכלל 100 מב) אַקטיוו און אויב איר טאָן ניט האָבן אַ סיסטעם רעזערווירט צעטיילונג, צייכן C: דרייוו ווי די אַקטיוו צעטיילונג.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
אופֿן 7: פאַרריכטן ינסטאַלירן Windows 10
אויב קיין פון די אויבן לייזונג אַרבעט פֿאַר איר, איר קענט זיין זיכער אַז דיין הדד איז גוט, אָבער איר קען זען די טעות "Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key"ווייַל די אַפּערייטינג סיסטעם אָדער די BCD אינפֿאָרמאַציע אויף די הדד איז עפעס ירייסט. נו, אין דעם פאַל, איר קענען פּרובירן צו פאַרריכטן ינסטאַלירן Windows, אָבער אויב דאָס אויך פיילז, די בלויז לייזונג איז צו ינסטאַלירן אַ נייַע קאָפּיע פון Windows (ריין ינסטאַלל).
אַז ס עס איר האָבן הצלחה פאַרריכטן Reboot and Select proper Boot device issue אָבער אויב איר נאָך האָבן קיין פֿראגן וועגן דעם פּאָסטן, פילן פריי צו פרעגן זיי אין די באַמערקונג אָפּטיילונג.