Fix Computer does not start until restarted multiple times

Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.

Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.

Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.

Fix Computer does not start until restarted multiple times

Rii daju lati ṣẹda aaye imupadabọ, o kan ni ọran ti nkan kan ba jẹ aṣiṣe.

akiyesi: Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.

Ọna 1: Pa Ibẹrẹ Yara

1.Press Windows Key + R then type control and hit Enter to open Ibi iwaju alabujuto.

2.Click lori Ohun elo ati Ohun ki o si tẹ lori Awọn aṣayan Agbara.

3. Lẹhinna lati inu window window osi yan “Yan ohun ti awọn bọtini agbara ṣe."

4. Bayi tẹ lori "Yi awọn eto pada ti o wa ni bayi ko si."

5.Uncheck “Ṣiṣe ibẹrẹ ni kiakia” ki o si tẹ lori Fipamọ awọn ayipada.

Ọna 2: Ṣiṣe Atunṣe Aifọwọyi

1.Fi sii Windows 10 DVD fifi sori ẹrọ bootable ki o tun bẹrẹ PC rẹ.

2.When prompted to Tẹ bọtini eyikeyi lati bata lati CD tabi DVD, tẹ bọtini eyikeyi lati tẹsiwaju.

3.Yan awọn ayanfẹ ede rẹ, ki o tẹ Itele. Tẹ Tunṣe kọmputa rẹ ni isalẹ-osi.

4.On yan iboju aṣayan, tẹ Laasigbotitusita.

5.On Laasigbotitusita iboju, tẹ Aṣayan ilọsiwaju.

6.On awọn To ti ni ilọsiwaju awọn aṣayan iboju, tẹ Atunṣe aifọwọyi tabi Ibẹrẹ Ibẹrẹ.

7.Duro digba na Windows laifọwọyi / Ibẹrẹ Tunṣe pari.

8.Tun bẹrẹ ati pe o ni aṣeyọri Fix Computer does not start until restarted multiple times issue, ti kii ba ṣe bẹ, tẹsiwaju.

Paapaa, ka Bii o ṣe le ṣatunṣe Atunṣe Aifọwọyi ko le tun PC rẹ ṣe.

Ọna 3: Tun BIOS pada si awọn eto aiyipada

1.Pa rẹ laptop, ki o si tan-an ati ni nigbakannaa tẹ F2, DEL tabi F12 (da lori olupese rẹ) lati tẹ sinu BIOS iṣeto ni.

2.Now you’ll need to find the reset option to fifuye awọn aiyipada iṣeto ni ati pe o le ni lorukọ bi Tunto si aiyipada, Awọn abawọn ile-iṣẹ fifuye, Ko awọn eto BIOS kuro, awọn aiyipada iṣeto fifuye, tabi nkan ti o jọra.

3.Select it with your arrow keys, press Enter, and confirm the operation. Your BIOS yoo lo bayi aiyipada eto.

4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.

Method 4: Check if hard disk is failing

In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.

Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.

Ọna 5: Ṣayẹwo Ipese Agbara

A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Method 6: Replace CMOS battery

If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.

Ọna 7: Atunto ATX

akiyesi: Ilana yii ni gbogbo igba kan si awọn kọnputa agbeka, nitorinaa ti o ba ni kọnputa lẹhinna lọ kuro ni ọna yii.

1.Power off your laptop then remove the power cord, leave it for few minutes.

2.Bayi yọ batiri kuro lati ẹhin ki o tẹ bọtini agbara mu fun iṣẹju 15-20.

akiyesi: Maṣe so okun agbara pọ sibẹ, a yoo sọ fun ọ nigbati o ṣe bẹ.

3.Now plug in okun agbara rẹ (batiri ko yẹ ki o fi sii) ati igbiyanju gbigba kọǹpútà alágbèéká rẹ soke.

4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.

If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.

Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.

niyanju:

Iyẹn ni o ni aṣeyọri Fix Computer does not start until restarted multiple times issue ṣugbọn ti o ba tun ni awọn ibeere eyikeyi nipa itọsọna yii lẹhinna lero ọfẹ lati beere lọwọ wọn ni apakan asọye.