When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Ti igba atijọ Awọn ọna System.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe aami.
2. If the status is set to Ko sopọmọ, tẹ lori Network globe icon, choose your Wi-Fi network and click on So button. Make sure Ipo ofurufu ko tan.
3. If you again face the same network connection error code, then click on the Ge asopọ button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Ọtun-ọtun lori awọn Wi-Fi aami ki o si yan Open Network & Internet settings.
6. Tẹ lori Wi-Fi.
7. Scroll down the right menu, click on Ṣakoso awọn nẹtiwọọki ti a mọ.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Gbagbe.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Ọna 2: Tun olulana bẹrẹ
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
akiyesi: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Wa awọn Bọtini agbara at the back of your router.
2. Press the button once to pa a.
3. Bayi, ge asopọ rẹ Router power cable ati ki o duro titi ti agbara ti wa ni o šee igbọkanle drained lati awọn capacitors.
4. Lẹhinna, reconnect awọn okun agbara ki o si tan-an lẹhin iṣẹju kan.
5. Wait until the network connection is re-established and try signing in again.
Tun Ka: Ṣe atunṣe Awọn kọnputa Ko Fihan Lori Nẹtiwọọki ni Windows 10
Ọna 3: Ṣiṣe Laasigbotitusita Nẹtiwọọki
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Lu awọn Bọtini Windows ati tẹ Awọn eto laasigbotitusita ninu igi wiwa ati Ṣii.
2. Tẹ lori Afikun awọn laasigbotitusita.
3. Yan Nẹtiwọọki Nẹtiwọọki o si tẹ lori Ṣiṣe awọn oluṣakoso naa.
4. Select the network adapter to diagnose o si tẹ lori Itele.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, tẹ lori Pa aṣe wahala.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Tun Ka: Fix Family Sharing YouTube TV Not Working
Ọna 4: Awọn faili eto atunṣe
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Oluṣakoso Oluṣakoso System) /DISM (Iṣakoso Iṣakoso Aworan ati Itọsọna) utilities on your Windows 10 PC.
1. Lu awọn Bọtini Windows, tẹ Òfin Tọ o si tẹ lori Ṣiṣe bi olutọju.
2. Tẹ lori Bẹẹni ni Iṣakoso Iṣakoso olumulo kiakia.
3. Iru chkdsk C: / f / r / x pipaṣẹ ati ki o lu Tẹ bọtini.
4. Ti o ba beere lọwọ rẹ pẹlu ifiranṣẹ kan, Chkdsk ko le ṣiṣe… iwọn didun wa… ni ilana lilo, lẹhinna, tẹ Y ki o si lu Tẹ bọtini.
5. Lẹẹkansi, tẹ aṣẹ naa: sfc / scannow ki o si tẹ Tẹ bọtini lati ṣiṣe awọn Oluṣakoso Oluṣakoso System ọlọjẹ.
akiyesi: Ayẹwo eto yoo bẹrẹ ati pe yoo gba iṣẹju diẹ lati pari. Nibayi, o le tẹsiwaju ṣiṣe awọn iṣẹ miiran ṣugbọn ṣe akiyesi ti ko lairotẹlẹ tii window naa.
Lẹhin ipari ọlọjẹ naa, yoo ṣafihan boya ninu awọn ifiranṣẹ wọnyi:
- Idaabobo Ohun elo Windows ko rii awọn irufin iduroṣinṣin eyikeyi.
- Idaabobo orisun Windows ko le ṣe iṣẹ ti o beere.
- Idaabobo orisun Windows ri awọn faili ti o bajẹ ati pe o tun wọn ṣe ni aṣeyọri.
- Idaabobo orisun Windows ri awọn faili ti o bajẹ ṣugbọn ko lagbara lati ṣatunṣe diẹ ninu wọn.
6. Ni kete ti ọlọjẹ ti pari, bẹrẹ PC rẹ.
7. Lẹẹkansi, ifilọlẹ Aṣẹ Pii bi alabojuto ki o si ṣe awọn ofin ti a fun ni ọkọọkan:
dism.exe / Online / Cleanup-image /scanhealth dism.exe / Online / Cleanup-image / restorehealth dism.exe / Online / Cleanup-image /startcomponentcleanup
akiyesi: O gbọdọ ni asopọ intanẹẹti ti n ṣiṣẹ lati ṣiṣẹ awọn aṣẹ DISM daradara.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Lu awọn Bọtini Windows ati tẹ Ero iseakoso in the Windows search menu. Click on Open.
2. Faagun awọn Awọn oluyipada nẹtiwọki apakan nipa titẹ-lẹẹmeji lori rẹ.
3. Ọtun-tẹ lori rẹ Awakọ nẹtiwọki (fun apere, Intel (R) Dual Band Wireless-AC 3168) ki o si yan Mu ẹrọ ṣiṣẹ aṣayan.
4. Confirm the below prompt by clicking on Bẹẹni.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Mu ẹrọ ṣiṣẹ aṣayan.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Tun Ka: Fix Windows ko le ṣe awari awọn eto Aṣoju Nẹtiwọọki yii laifọwọyi
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Lọ si awọn search akojọ ki o si tẹ cmd. Tẹ lori Ṣiṣe bi olutọju.
2. Tẹ awọn wọnyi awọn aṣẹ ki o si lu Tẹ bọtini.
netsh winsock tunto netsh int ip ipilẹsẹ ipconfig / tu silẹ ipconfig / tunse
3. Duro fun awọn pipaṣẹ lati wa ni ṣiṣẹ ati atunbere PC rẹ.
Ọna 7: Flush DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Ifilole Òfin Tọ by searching in the Windows akojọ and click on Run as administrator.
2. Iru ipconfig / flushdns in the command window and hit Tẹ.
Tun Ka: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Lọlẹ awọn Run apoti ajọṣọ nipa titẹ Awọn bọtini Windows + R papo.
2. Iru ncpa.cpl ati ki o lu Tẹ bọtini.
3. Right-click on your active ohun ti nmu badọgba nẹtiwọki o si tẹ lori Properties.
4. Uncheck awọn Ẹya Protocol Intanẹẹti 6 (TCP / IPv6) aṣayan.
5. Níkẹyìn, tẹ lori OK to save the changes and check if the issue is resolved.
akiyesi: If you use multiple network connections, navigate to Nẹtiwọki ati Ile-iṣẹ Ṣiṣowo ati Yi ohun ti nmu badọgba pada settings. Right-click on the adapter and select mu. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Iru Ero iseakoso in the Windows search menu and click Open.
2. Double tẹ lori awọn Awọn oluyipada nẹtiwọki lati faagun rẹ.
3. Ọtun-tẹ lori rẹ Iwakọ (fun apẹẹrẹ Intel(R) Meji Band Alailowaya-AC 3168) ki o tẹ Imudani imudojuiwọn.
4. Tẹ lori Ṣawari kọmputa mi fun awọn awakọ to locate and install a driver manually.
5. Tẹ lori kiri button to choose any directory and click on Itele.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Awọn awakọ ti o dara julọ fun ẹrọ rẹ ti fi sii tẹlẹ.
6. Tẹ lori Close lati jade ni window.
7. Tun bẹrẹ the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Ifilole Ero iseakoso from the Windows search menu.
2. Ọtun-ọtun lori awọn Iwakọ ki o si yan Ẹrọ aifiṣe.
3. A warning prompt will be displayed on the screen. Check the box “Paarẹ software iwakọ fun ẹrọ yii” and confirm the prompt by clicking Aifi.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Ṣabẹwo si aaye ayelujara ti olupese.
2. ri ati download the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the gbaa lati ayelujara faili and follow the given instructions to install it.
Tun Ka: How to set up a VPN on Windows 10
Ọna 10: Ṣe imudojuiwọn Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Tẹ awọn Windows + Mo awọn bọtini papo lati ṣii Eto lori kọmputa rẹ.
2. Yan Imudojuiwọn & Aabo.
3. Yan Ṣayẹwo fun Awọn imudojuiwọn.
4A. Click fi sori ẹrọ bayi to download and install the latest update available.
4B. If your system is already up-to-date, then it will show O ti wa ni imudojuiwọn ifiranṣẹ.
Ọna 11: Aifi si awọn imudojuiwọn aipẹ
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Tẹ mọlẹ Awọn bọtini Windows + R papo lati ṣii awọn Run apoti ibanisọrọ.
2. Iru appwiz.cpl ati ki o lu Tẹ.
3. Tẹ lori Wo awọn imudojuiwọn ti a fi sori ẹrọ.
4. Select the most recent update and click on Aifi.
5. Confirm the prompt, if any, and atunbere PC.
Tun Ka: Bii o ṣe le ṣatunṣe Firefox kii ṣe Awọn oju-iwe ikojọpọ
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
akiyesi: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Eto ki o si System ati Nipa. Once you have reset your network, you have to reinstall all networking software bi VPN onibara or Foju yipada.
1. Tẹ mọlẹ Awọn bọtini Windows + I papo lati ṣii Awọn Eto Windows.
2. Tẹ lori Nẹtiwọọki & Intanẹẹti.
3. Tẹ lori Atunto nẹtiwọki labẹ Ipo.
4. Jẹrisi tọ nipa tite lori Tun bayi.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
niyanju:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.