The Code 43 error is a typical Device Manager Error Code faced by users. This error occurs when the Windows Device Manager restricts a hardware device because specific problems were reported due to that device. Along with the error code, there will be an error message attached “Windows has stopped this device because it has reported problems”.
There are two possibilities when this error occurs. one of them is an actual error in the hardware or either the windows cannot identify the issue, but the device connected to your PC is being affected by the problem.
This error can be due to issues faced by any hardware in the device manager, but majorly the error appears on USB devices and other similar peripherals. Windows 10, Windows 8, or Windows 7, any of Microsoft’s operating systems can face this error. So, if any device or hardware is not working, first of all, find out if that is because of the error code 43.
Identify If There Is Error Related To Code 43
1。 按 Windows键+ R,输入命令 输入devmgmt.msc 在对话框中,然后按 输入.
2. 装置经理 对话框将打开。
3. The device having a problem will have a 黄色感叹号 next to it. But sometimes, you’ll have to check for the issues in your device manually.
4. Expand the device folder, which you feel has a problem. Here, we will troubleshooting issues with the Display adapters. Double-click on the selected device to open its 属性。
5. After opening the properties of the device, you can see the status of the device, whether it is working correctly or there is an error code.
6. If the device is working correctly, then it will show a message that the device is working properly under Device status, as shown below.
7. A message related to error code 43 will be displayed under Device status if there is an issue with the device.
8. After getting the desired information, click on the Ok 按钮并关闭 装置经理.
If you get a message stating “设备工作正常,” then there is no issue with any of your device and you can continue using your PC. But, if you get a message related to error code 43, then you need to fix it by using the below-listed troubleshooting steps.
How To Fix Error Code 43
Now it is confirmed that error code 43 is the issue that has stopped your device from working correctly, so we’ll see how to fix the underlying cause in order to resolve error code 43.
There are several methods, and you’ll have to try each method one by one to find out which method will solve your problem.
方法 1:重启你的电脑
The first way to solve the code 43 error is to 重新启动电脑. If you have made any changes to your PC and your restart is pending, you are most likely to get the code error 43.
1. To restart your PC, click on the 开始菜单.
2。 点击 功率 button on the bottom left corner then click on the 重新启动 按钮。
3.Once you click on Restart, your PC will restart.
Method 2: Unplug then again Plug in the device
If any external device like a 打印机, 加密狗, webcam, etc. is facing error code 43, then by unplugging the device from the PC and plugging it back can solve the problem.
If the problem persists, then try to resolve it by changing the USB port (if another one is available). Some USB devices require more power, and changing the port may fix the problem.
Method 3: Undo the changes
If you had installed a device or made changes in the device manager before the error code 43 problem popped in, then these changes may be responsible for the issues you are facing. So, your problem can be solved by undoing the changes using System Restore. Once you have done so, you need to check if you are still facing the issues or not.
Method 4: Remove other USB devices
If you have multiple USB devices connected to your PC and you are facing error code 43, then the devices connected to your PC may be facing incompatibility issues. So, by removing or unplugging other devices and then restarting your PC can solve the problem.
Method 5: Reinstall the drivers for the device
Uninstalling and reinstalling the drivers for the device which is facing error code 43 may resolve the issue.
To uninstall the drivers for the device facing the issue, follow these steps:
1。 按 Windows键+ R,输入命令 输入devmgmt.msc 在对话框中,然后按 输入.
2. 装置经理 窗口将打开。
3. 双击 on the device which is facing the problem.
4.设备 查看房源 窗口将打开。
5。 切换到 驱动程序选项卡 然后点击 卸载设备 按钮。
6。 “ 警告 dialog box will open, stating that you are about to uninstall the device from your system。 点击 卸载 按钮。
Note: If you want to delete the driver software from your system, then click on the checkbox next to Delete Driver Software from this Device.
7。 点击 卸载 button, your driver and device will be uninstalled from your PC.
如果你会更好 重新安装 the drivers on the PC by following these steps:
1。 打开 装置经理 对话框按 Windows Key + R 然后输入 输入devmgmt.msc 并按Enter键。
2。 切换到 操作 制表 on the top. Under Action, select 扫描硬件更改.
3. Once the scan is completed, go & check the list of devices. The device & the drivers which you uninstalled will be automatically installed by the Windows again.
After completing these steps, you need to check the status of the device, and the following message may appear on your screen: “这个装置在正常运作设立的区域办事处外,我们在美国也开设了办事处,以便我们为当地客户提供更多的支持。“
方法6:更新驱动程序
By updating the drivers for the device facing, you may be able to fix error code 43 & 0x80070490 on Windows 10. To update the driver for the device, follow these steps:
1。 按 Windows键+ R,输入命令 输入devmgmt.msc 在对话框中,然后按 输入.
2. 装置经理 对话框将打开。
3. 右键单击 on the device facing the problem and select 更新驱动程序。
4。 点击 自动搜索更新的驱动程序软件.
5. Once its search is complete, if there are any updated drivers, then it will download and install them.
After completing these steps, the device which was facing problem drivers will be updated, and now your issue may be resolved.
Method 7: Power Management
The save power feature of your PC can be responsible for the device throwing error code 43. To check and to remove the save power option, follow these steps:
1。 按 Windows键+ R,输入命令 devmgmt。MSC in the dialog box, and press enter.
2. 装置经理 对话框将打开。
3. Scroll down the list and expand the Universal serial bus controllers 选项 双击 就可以了。
4. 右键单击 在 USB根集线器 选项并选择 查看房源. USB Root Hub Properties dialog box will open up.
5。 切换到 电源管理选项卡 和 取消选中 旁边的盒子 让计算机关闭此设备以节省电量. then click OK.
6. Repeat the same process if there is any other USB Root Hub device listed.
Method 8: Replace the Device
The code 43 error may be caused because of the device itself. So, replacing the device is the best solution to resolve the error code 43. But, it is advisable that before replacing the device, first, you should try the methods listed above to troubleshoot the issue and fix any underlying issue causing the error code 43. If any of these methods do not solve your issue, then you can replace your device.
推荐:
So, by using the mentioned steps, hopefully, you will be able to Fix Error Code 0x8009000f 0x90002 or 43 on Windows 10 . But if you still have any queries then feel free to ask them in the comment’s section