Fix Driver Power State Failure in Windows 10: Driver Power State Failure Error (0x0000009F) mostly occur due to outdated or incompatible drivers for the hardware devices of your PC. 驱动器电源状态故障 is an error which is displayed on Blue Screen of Death(BSOD), which doesn’t mean that your computer can’t be repaired, it just means that the PC has encountered something that it didn’t know what to do.
And the biggest problem you encounter is that you can’t log on to the Windows, because every time you restart your PC you will be shown Driver Power State Failure Error ( DRIVER_POWER_STATE_FAILURE Error ), hence you are stuck in an endless loop. However, this error is totally fixable if you will follow this article as shown below.
注意: Most of the users who encounter this issue have put their computer to sleep and when they try to wake up their PC they encounter this error.
The most common driver which cause this error are antivirus software’s, so try to disable them and try to reboot your Windows. Always update your BIOS!
修复Windows 10中的驱动程序电源状态失败
Before going any further let’s discuss how to Enable Legacy Advanced Boot Menu so that you can easily get into Safe Mode:
1. 重新启动 Windows 10。
2.As the system restarts enter into BIOS setup and configure your PC to boot from CD/DVD.
3.插入 Windows 10 可启动安装 DVD 并重新启动电脑。
4. 当提示按任意键从 CD 或 DVD 启动时,按任意键继续。
5.选择您的 语言偏好, 并点击下一步。 单击修复 您的计算机位于左下角。
6.在选择选项屏幕上,单击 疑难解答.
7.在故障排除屏幕上,单击 高级选项.
8.On Advanced options screen, click 命令提示符.
9.When the Command Prompt(CMD) open type C: 并回车。
10.Now type the following command:
BCDEDIT / SET {默认} BOOTMENUPOLICY传统
11.And hit enter to Enable Legacy Advanced Boot Menu.
12.Close Command Prompt and back on the Choose an option screen, click continue to restart Windows 10.
13.Finally, don’t forget to eject your Windows 10 installation DVD, in order to boot into 安全模式.
Method 1: Uninstall Problematic Driver
1. As the computer restarts, press F8 to display the 高级启动选项 并选择 安全模式。
2.Hit Enter to start Windows 10 in Safe Mode.
3.Press Windows Key + R and type “输入devmgmt.msc” then hit enter to open Device Manager.
4.Now inside Device Manager, you must see the problematic device driver (it has a yellow mark next to it).
Also, see Fix This device cannot start (Code 10)
5.Once the problematic device driver is identified, right click and select 卸载。
6.When asked for confirmation, click 好吧。
7.Once the driver is uninstalled restart Windows 10 normally.
Method 2: Check Windows Minidump file
1.Let’s first make sure that minidumps are enabled.
2.Press Windows Key + R and type “SYSDM.CPL” then press enter.
3.Go to advanced tab and click on the Settings button in 启动和恢复。
4.确保 自动重启 under System failure is unchecked.
5.Under the Write Debugging Information header, select Small memory dump (256 kB) in the drop-down box.
6.确保 Small Dump Directory 列为 %systemroot%Minidump.
7.Click OK and restart your PC to apply the changes.
8.Now install this program called 谁崩溃了.
9.运行 谁崩溃了 and click on Analyze.
10..Scroll down to view the report and check for the problematic driver.
11.Finally, update the driver and Reboot to apply your changes.
12.Now Press Windows键+ R 然后输入“msinfo32”然后按回车键。
13.在 系统摘要 make sure all your drivers are up to date.
14.Make sure your BIOS is also updated, else update it.
15.Select 软件环境 然后点击 Running Tasks.
16.Again make sure the drivers have updated i.e. no drivers have file dated back to 2 years.
17.Reboot your PC and this would 修复Windows 10中的驱动程序电源状态失败 但如果没有,则继续。
Method 3: Run System File Check (SFC)
1.In the safe mode, Right click on Start and select Command Prompt(Admin) to open cmd.
2.在cmd中输入以下命令: /现在扫描
3.Let system file check run, usually, it takes 5 to 15 minutes.
请注意: Sometimes you have to run SFC command 3-4 times to fix the problem.
4.After the process is finished and you receive the following message:
Windows 资源保护发现损坏的文件并成功修复它们。 详细信息包含在 CBS.Log %WinDir%LogsCBSCBS.log.
5.Simply restart your PC and see if the problem is resolved or not.
6.If you receive the following message:
Windows 资源保护找到了损坏的文件,但无法修复其中的一些。 详细信息包含在 CBS.Log %WinDir%LogsCBSCBS.log.
7.Then you have to manually repair corrupted files, to do this first view details of the SFC process.
8.At the command prompt, type the following command, and then press ENTER:
findstr /c:"[SR]" %windir%LogsCBSCBS.log >"%userprofile%Desktopsfcdetails.txt"
9.Open Sfcdetails.txt file from your desktop.
10.The Sfcdetails.txt file uses the following format: Date/Time SFC detail
11.The following sample log file contains an entry for a file that could not be repaired:
2014-02-17 02:40:22, CSI 000001aa [SR] Cannot repair member file [l:22{11}]"autochk.exe" of Microsoft-Windows-Autochk, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
12.Now type the following command in the cmd:
DISM.exe /Online /Cleanup-image /Scanhealth && DISM.exe /Online /Cleanup-image /Restorehealth
This will run DSIM(Deployment Image Servicing and Management) restore commands and will fix SFC errors.
13.After running DISM it is a good idea to re-run SFC /scannow to make sure all the issues were fixed.
14.If for some reason DISM command is not working try this SFCFix Tool.
15.重新启动您的电脑,看看是否可以 Fix Driver Power State Failure in Windows 10.
Method 4: Restore you PC to earlier time
1.按 Windows 键 + R 并输入“SYSDM.CPL”然后按回车键。
2.Select 系统保护 标签并选择 系统还原。
3.单击下一步并选择所需的 系统还原点.
4.Follow on screen instruction to complete system restore.
5.After reboot, you must have fixed the Driver Power State Failure.
为你推荐:
这样你就成功了 修复Windows 10中的驱动程序电源状态失败 if you still have any question regarding this post feel free to ask them in comments.