Intel Wireless AC 9560 is the most dedicated Wi-Fi adapter of Intel. If this network adapter fails to work on your device, you cannot connect to any network. This issue is often accompanied by an error code of 10 or 45 if you check the properties of this network adapter. If you are also facing Intel Wireless AC 9560 not working issue on your Windows 10 PC, you can easily troubleshoot the same by following the below-listed hacks. So, continue reading to fix Intel Wireless AC 9560 code 10 error.
How to Fix Intel Wireless AC 9560 Not Working
You may wonder why this problem occurs on your Windows 10 PC. Here are some valid reasons that trigger this problem in your device.
- Router configuration is not proper.
- 网络连接很差。
- The cable connecting the router and the modem is damaged or broken.
- 太多人连接到同一网络。
- Wireless interference between the router and your device.
- 过时的网络驱动程序。
- Other background processes are consuming too many CPU resources from your PC.
- Incompatible proxy/ TCP configuration settings.
- The DNS addresses are not appropriate.
- Few essential Windows services like WLAN Autoconfig are not enabled on your device.
- Corrupt components on PC and presence of malware.
- The Operating system version is not compatible with the latest version of the driver.
Here are a few troubleshooting ideas that will help you fix the issue. Follow them in the same order to attain the best results.
请注意: Few steps in this guide are demonstrated with some other Wireless adapters. Follow the steps for 英特尔无线AC 9560 driver accordingly.
方法一:基本故障排除方法
Before going through the advanced troubleshooting methods, follow these basic methods to fix the issue.
1A。重新启动电脑
If there are any temporary glitches in your PC, you will face Intel Wireless AC 9560 code 10. The general trick to resolve all the temporary glitches is to restart your computer. You can restart your PC by following the steps.
1.点击 Windows + D 键 一起去 桌面版.
2. 现在,按 Alt + F4 键 同时进行。
3. 然后,选择 重新启动 option from the drop-down menu and hit 输入.
1B.确保网络连接正常
Unstable internet connection leads to Intel Wireless AC 9560 not working code 10, also if there are any obstacles between your router and your computer, they may interfere with the wireless signal and will cause intermittent connection problems. You can run a SPEEDTEST 了解正确连接所需的最佳网络速度水平。
确保您的设备满足以下标准。
- 查找网络的信号强度,如果信号强度非常低,请清除中间的所有障碍物。
- 避免太多设备连接到同一网络。
- 请务必购买经过互联网服务提供商 (ISP) 验证的调制解调器/路由器,它们不会发生冲突。
- 不要用 旧的、破损的或损坏的电缆。 如有必要,请更换电缆。
- 确保从调制解调器到路由器以及调制解调器到墙壁的电线稳定且不受干扰。
另请参阅: 修复 Windows 10 中找不到 WiFi 网络的问题
1C. Run Network Troubleshooter and Reset TCP/IP
To fix various internet connectivity issues, you can use the inbuilt tool provided in Windows 10 PC whenever needed. By using the Windows network troubleshooter tool, you can analyze and diagnose any common network-related issues. It is a systematic process, when implemented step by step, will help you fix Intel Wireless AC 9560 keeps disconnecting problem.
Follow our guide How to Troubleshoot Network Connectivity Problems on Windows 10 to learn basic troubleshooting steps to fix all network-related issues by using the Windows Network Adapter troubleshooter.
You can use the steps mentioned in the guide to diagnose Wi-Fi connections, Ethernet, and all network adapters in your Windows 10 PC. Finally, check if you have fixed the discussed error or not.
1D。关闭后台进程
Several users have confirmed that Intel Wireless AC 9560 not working issue can be resolved by closing all the background tasks running on your PC. To implement the task, follow our guide How to End Task in Windows 10 and proceed as instructed.
Once you have closed all the background processes, check if you were able to fix the issue or not.
1E。修复系统文件
If there are any corrupt system files in your Windows Operating system, your PC may face a lot of internet connectivity issues. If you are experiencing Intel Wireless AC 9560 code 10 very recently, there are some chances that your computer files have become corrupt or damaged.
幸运的是,您的 Windows 10 PC 具有内置修复工具,例如 SFC(系统文件检查器)和 DISM(部署映像服务和管理),可以帮助您修复所有损坏的文件。
阅读我们的如何修复 Windows 10 上的系统文件指南,并按照说明的步骤修复所有损坏的文件。
另请参阅: 修复 Windows 10 Netwtw04.sys 蓝屏错误
1F. Use Google DNS
Domain Name System (DNS) addresses are responsible to establish a network connection between the client and server-side. Many technical experts have suggested that using Google DNS addresses helped them to fix Intel Wireless AC 9560 not working issue. To do so, follow our guide on How to change DNS settings in Windows 10.
1G. Disable Proxy Server
Sometimes, inappropriate network configurations on your Windows 10 computer, you will face Intel Wireless AC 9560 code 10 issue. If you have installed any VPN service or use proxy servers on your PC, read out How to Disable VPN and Proxy on Windows 10 and implement the steps as instructed in the article.
After disabling the VPN client and proxy servers, check if you have fixed the discussed issue. Still, if you face the same problem, try connecting to a 移动热点。
After implementing the steps, check if you can fix Intel Wireless AC 9560 not working or not.
另请参阅: 修复 Windows 10 中计算机未显示在网络上的问题
1H。更新Windows
You can also eradicate Intel Wireless AC 9560 keeps disconnecting on your computer by updating your Operating System. Always ensure if you have updated your Windows Operating System and if there are any updates pending in action, use our guide How to Download and Install Windows 10 Latest Update.
After updating your Windows Operating System, check whether you can connect to your network adapter.
1I. Run Malware Scan
Sudden virus or malware attack will result in Intel Wireless AC 9560 not working code 10 issue on your computer. If in case, the virus attack is very severe, you cannot connect to any network continuously at all. To resolve the problem, you have to remove the virus or malware completely from your Windows 10 computer.
建议您按照我们的指南中的说明扫描您的计算机 如何在我的计算机上运行病毒扫描?
另外,如果您想删除计算机中的恶意软件,请查看我们的指南如何在 Windows 10 中从您的电脑中删除恶意软件。
Method 2: Enable WiFi from Settings
Intel Wireless AC 9560 code 10 will hide the internet icons from the main menu and you cannot use them as you do regularly. If you cannot see WiFi in the Taskbar, you can enable it from the settings menu as instructed below.
1。 按 Windows + I键 一起开 Windows设置.
2。 现在,点击 网络与互联网 设置如图。
3. Now, in the left pane click on the Wi-Fi 标签并在 Wi-Fi 按钮。
另请参阅: 修复 Windows 无法自动检测该网络的代理设置
Method 3: Regenerate IP Address
Some internet tasks won’t function on public IP addresses due to security concerns, and as a result, they temporarily freeze the account. Follow these steps to reset the IP address and fix Intel Wireless AC 9560 code 10.
1。 按 Windows键 和类型 命令提示符 在搜索框中。
2。 右键单击 命令提示符 并选择 以管理员身份运行“.
3。 点击 Yes to give permission.
4. 输入以下内容 命令 one after the other and hit 回车键 在每个命令之后。
ipconfig / flushdns ipconfig / release命令 使用ipconfig / renew
5. Execute the following 命令 to fix any wrong network configuration:
netsh的诠释IP复位 的netsh winsock重置
6. After entering the commands, 重新启动电脑.
Method 4: Re-enable Wi-Fi Cards
Sometimes, if the Wi-Fi adapters are not enabled on your PC, you will face Intel Wireless AC 9560 keeps disconnecting issue. But there are a few simple instructions to enable WiFi adapters on your computer.
1。 打开 运行 对话框按 Windows + R键 在一起。
2. 现在,输入 ncpa.cpl 并击中 回车键 推出 网络连接.
3. 现在,右键单击您的活动 网络适配器 并检查它是启用还是禁用。
4。 点击 启用 如果状态为禁用。
请注意: If the status is already in Enable, move to the next method.
Check if you have fixed Intel Wireless AC 9560 issue or not.
另请参阅: 修复以太网没有有效 IP 配置错误
Method 5: Disable & Enable Intel Wireless AC 9560 Adapter
Sometimes, a small temporary glitch in your network adapters can cause Intel Wireless AC 9560 not working code 10 issue. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1.点击 Windows键 和类型 装置经理 在 Windows 搜索菜单中。点击 可选 如图所示。
2. 现在,展开 网络适配器 双击该部分。
3. 然后,右键单击 英特尔无线AC 9560 driver and select the 禁用设备 选项。
请注意: 我们已经证明了 Qualcomm Atheros QCA9388无线网络适配器 举个例子。
4. Then, confirm the below prompt by clicking on Yes.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, right-click on 英特尔无线AC 9560 并选择 启用设备 如图所示。
Finally, check if the issue with your driver is fixed or not.
Method 6: Start WLAN AutoConfig Service
A ton of services will run in the background whenever you boot your Windows 10 PC. One among them is the WLAN AutoConfig service which is responsible for WiFi services. If this service is disabled, you may face Intel Wireless AC 9560 keeps disconnecting issue and what you need to do is to restart the service as instructed below.
1。 去 在此处输入内容进行搜索 field in the bottom left corner of the screen and type 特色服务 as shown. Then, click on 可选.
2. 现在,搜索 WLAN 自动配置服务 并双击它。
请注意: You can also right-click on WLAN 自动配置服务 并选择 查看房源 下拉列表中的选项。
3. 现在,选择 “启动类型” as 自动表.
3A。如果 服务状态 是不是 运行,然后点击 Start 开始 按钮。
3B。如果 服务状态 is 运行,点击 Stop 停止 button for a while and Start it again.
4.最后,点击 申请>确定 保存更改。
另请参阅: 如何在 Windows 10 上设置网络文件共享
方法一:禁用省电模式
Sometimes, you may face Intel Wireless AC 9560 not working code 10 issue if you have enabled power-saving mode in your Windows 10 computer. This leads to several network connectivity problems. We advise you to disable power saving mode as instructed below.
1。 发射 装置经理 by typing it in the Windows 10 search menu and clicking on 可选.
2. 现在,双击 网络适配器 部分。
3. 然后,右键单击 英特尔无线AC 9560 并选择 查看房源 如图所示。
4. 然后,切换到 电源管理 在窗口 网络适配器属性 窗口并取消选中旁边的框 让计算机关闭此设备以节省电量.
5.最后,点击 OK 保存更改。
Method 8: Update Intel Wireless AC 9560 Driver
Device drivers establish a connection link between the hardware and Operating System of your computer. Also, faulty or corrupt drivers lead to Intel Wireless AC 9560 keeps disconnecting issue. Many users have reported that updating all WLAN drivers have helped them fix the issue.
Option I: Update Network Driver
You are advised to update WLAN drivers to improve the reliability of your network adapters, fix compatibility issues, and resolve the discussed issue. Follow our guide on How to Update Network Adapter Drivers on Windows 10 to do so.
Option II: Roll Back Driver Updates
When you roll back your drivers, all the current versions of the hardware device will be uninstalled and previously installed drivers will be installed on your PC. This feature will be very helpful when any new driver update does not work well with your computer. Follow the steps as instructed in our guide How to Rollback Drivers on Windows 10 to fix the discussed issue.
After your Windows 10 computer has installed the previous version of drivers, check if you have fixed the discussed problem.
Method 9: Reinstall Intel Wireless AC 9560 Driver
Incompatible drivers must be reinstalled to fix Intel Wireless AC 9560 not working code 10. You are advised to reinstall device drivers only if you cannot attain any fix by updating them. Steps to reinstall drivers are very easy and you can do so by using a third-party application or manually.
Follow our guide How to Uninstall and Reinstall Drivers on Windows 10 on your Windows 10 computer.
重新安装网络驱动程序后,检查是否已解决所讨论的问题。
另请参阅: 修复 Windows 0 上的网络错误 00028001x10
方法10:重置网络设置
Several users have declared that, resetting network settings will resolve strange network connection issues. This method will forget all the network configuration settings, saved credentials, and a lot more security software like VPN and antivirus programs.
To do so, follow our guide on How to Reset Network Settings on Windows 10
Method 11: Reset BIOS to Default
There are several customization settings in BIOS of your system in order to improve the system performance. Some activities like overclocking and caching might change any default settings and thus contributing to the said problem. Yet, the easiest way to tackle the problem is to reset the BIOS to default. Here is how to do that.
1. Restart your system and hold F2键 while pressing the Power button.
请注意: The combinational keys to turn on BIOS settings might vary according to the system model you use. You are advised to make sure which combinational keys work on your PC. Read 6 Ways to Access BIOS in Windows 10 (Dell/Asus/ HP) here.
2。 导航到 Advanced BIOS section 并选择 重置配置数据.
3。 最后,选择 保存并退出 选项。
方法12: 执行系统还原
If you have recently updated your Windows 10 operating system and later facing Intel Wireless AC 9560 not working code 10, the latest Windows update components may interfere with any software present in your computer and may cause the discussed issue. So, in this case, you must restore your computer to the previous version when it was working fine.
To do so, follow our guide on How to use System Restore on Windows 10 and implement the instructions as demonstrated.
After restoring your Windows 10 PC, check if you can connect to any network adapter without any problems.
另请参阅: 修复 Windows 10 上的互联网不断掉线的问题
方法 13:重置电脑
If none of the methods have helped you fix Intel Wireless AC 9560 code 10, then you have to clean install your Windows Operating System. To clean boot your computer, implement the steps as instructed in our guide How to do a Clean Install of Windows 10
Last but not the least, you have to seek for technical support if above listed methods fail to resolve Intel Wireless AC 9560 not working. If your modem does not communicate with your Internet Service Provider, a lot more technical connectivity problems arise in your device. The Internet Service Providers will check whether the devices are updated, compatible and properly registered.
推荐:
我们希望本指南对您有所帮助,并且您可以 fix Intel Wireless AC 9560 not working issue in Windows 10. Let us know what you want to learn about next. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.