When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- 病毒或恶意软件攻击。
- 过时的操作系统。
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe 图标。
2. If the status is set to 未连接,点击 Network globe icon, choose your Wi-Fi network and click on 分享链接 button. Make sure 飞行模式 没有打开。
3. If you again face the same network connection error code, then click on the Disconnect button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5.右键单击 无线网络图标 并选择 Open Network & Internet settings.
6。 点击 Wi-Fi.
7. Scroll down the right menu, click on 管理已知网络.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select 忘记。
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
方法一:重启路由器
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
请注意: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1。 找出 电源按钮 在路由器的背面。
2. 按一次按钮 把它关掉。
3.现在, 断开 选择您 Router power cable 等待电容器的电量完全耗尽。
4。 然后, 重新连接 此 电力电缆 一分钟后将其打开。
5. 等待网络连接重新建立并 尝试重新登录.
另请参阅: Fix Computers Not Showing Up on Network in Windows 10
方法3:运行网络疑难解答
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1.点击 Windows键 和类型 对设置进行故障排除 在搜索栏中和 打开。
2。 点击 其他疑难解答.
3。 选择 网络适配器 并点击 运行疑难解答.
4. Select the network adapter to diagnose 并点击 下一页.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, 点击 关闭疑难解答.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
另请参阅: 修复家庭共享 YouTube TV 无法正常工作的问题
方法五:修复系统文件
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (系统文件检查器) /DISM (部署映像服务和管理) utilities on your Windows 10 PC.
1.点击 Windows键,类型 命令提示符 并点击 以管理员身份运行“.
2。 点击 Yes ,在 用户帐户控制 提示。
3。 类型 chkdsk C:/ f / r / x 命令并击中 回车键.
4. 如果出现消息提示, Chkdsk cannot run…the volume is… in use process,然后输入 Y 并击中 回车键.
5. 再次输入命令: SFC / SCANNOW 并按下 回车键 运行 系统文件检查器 扫描。
请注意: 将启动系统扫描,需要几分钟才能完成。同时,您可以继续执行其他活动,但请注意不要意外关闭窗口。
完成扫描后,它将显示以下消息之一:
- Windows资源保护未发现任何完整性违规。
- Windows资源保护无法执行请求的操作。
- Windows资源保护发现损坏的文件并成功修复它们。
- Windows资源保护发现损坏的文件但无法修复其中一些。
6. 扫描完成后, 重新开始 您的电脑.
7.再次启动 命令提示符为管理员 并依次执行给定的命令:
dism.exe /在线 /cleanup-image /scanhealth dism.exe /在线 /cleanup-image /restorehealth dism.exe /在线 /cleanup-image /startcomponentcleanup
请注意: 您必须有有效的互联网连接才能正确执行 DISM 命令。
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1.点击 Windows键 和类型 装置经理 in the Windows search menu. Click on 可选.
2.展开 网络适配器 双击该部分。
3. 右键单击您的 网络驱动程序 (例如, Intel (R) Dual Band Wireless-AC 3168) 并选择 禁用设备 选项。
4. Confirm the below prompt by clicking on Yes.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the 启用设备 选项。
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
另请参阅: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Go to the search menu and type CMD。 点击 以管理员身份运行“.
2. 输入以下内容 命令 并击中 回车键.
的netsh winsock重置 netsh的诠释IP复位 ipconfig / release命令 使用ipconfig / renew
3. Wait for the commands to be executed and 重启你的电脑.
Method 7: Flush DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1。 发射 命令提示符 by searching in the Windows 菜单 and click on Run as administrator.
2。 类型 IPCONFIG / FLUSHDNS的 in the command window and hit 输入.
另请参阅: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1。 启动 运行 对话框按 Windows + R键 在一起。
2。 类型 ncpa.cpl 并击中 回车键.
3. Right-click on your active 网络适配器 并点击 查看房源.
4.取消选中 Internet协议版本6(TCP / IPv6) 选项。
5.最后,点击 OK to save the changes and check if the issue is resolved.
请注意: If you use multiple network connections, navigate to 网络和共享中心 和 更换适配器 settings. Right-click on the adapter and select 关闭. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1。 类型 装置经理 in the Windows search menu and click 可选.
2. 双击 网络适配器 扩大它。
3. 右键单击您的 司机 (例如 英特尔(R)双频Wireless-AC 3168),然后点击 更新驱动程序.
4。 点击 浏览我的计算机以获取驱动程序 to locate and install a driver manually.
5。 点击 浏览器 button to choose any directory and click on 下一页.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, The best drivers for your device are already installed.
6。 点击 关闭 退出窗口。
7. 重新启动 the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1。 发射 装置经理 from the Windows search menu.
2.右键单击 司机 并选择 卸载设备.
3. A warning prompt will be displayed on the screen. Check the box “删除驱动程序软件,该设备” and confirm the prompt by clicking 卸载.
4. Download and install the drivers on your device either by a manual update or automatic update.
5。 访问 制造商网站.
2. 找到最适合您的地方 和 下载 与您 PC 上的 Windows 版本相对应的驱动程序。
3. Once downloaded, double click on the 下载的文件 and follow the given instructions to install it.
另请参阅: How to set up a VPN on Windows 10
方法 10:更新 Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1。 按 的Windows + I 键 一起开 个人设置 在你的电脑上
2。 选择 更新与安全.
3。 选择 检查更新.
4A. Click 立即安装 to download and install the latest update available.
4B. If your system is already up-to-date, then it will show 你是最新的 信息。
方法 11:卸载最近的更新
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1。 按下并按住不动 Windows + R键 一起打开 运行 对话框。
2。 类型 APPWIZ.CPL 并击中 输入.
3。 点击 查看已安装的更新“.
4. Select the most recent update and click on 卸载.
5. Confirm the prompt, if any, and 重新启动电脑.
另请参阅: 如何修复 Firefox 不加载页面的问题
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the 网络适配器 installed in your PC along with their settings. All the stored settings are stored to default settings.
请注意: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to 个人设置 然后 系统 和 关于. Once you have reset your network, you have to reinstall all networking software 喜欢 VPN客户端 or 虚拟交换机.
1。 按下并按住不动 Windows + I键 一起开 Windows设置.
2。 点击 网络与互联网.
3。 点击 网络重置 下 Status.
4. 单击确认提示 立即重置.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
推荐:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.