Sometimes, when you connect to any limited network, you may end up with No internet, secured prompt. So, when you run Network diagnostics tool, the error code 0x00028001 will prompt on the screen. The most common reason for this error code is your network is being connected to a limited WiFi connection network. If you are also facing network error code 0x00028001, this guide will help you resolve the same. So, continue reading.
How to Fix Network Error 0x00028001 on Windows 10
You may wonder why network error 0x00028001 occurs on 窗户10. Here are some valid reasons that trigger this problem in your device.
- Infrastructure failure of your Windows 10 PC.
- Network connection is very bad.
- The cable connecting the router and the modem are damaged or broken.
- Too many people are connected to the same network.
- Wireless interference between router and your device.
- Outdated network drivers.
In this section, we have gathered some potential fixes that will help you fix 0x00028001 error code. Follow as instructed to attain perfect outcomes.
请注意: 始终确保创建系统还原点,以便在出现问题时恢复您的电脑。
基本故障排除方法
Follow the basic troubleshooting steps listed below before going through the advanced methods.
1. 重启电脑
1。 按 Alt + F4 键 一起打开 关闭窗口 窗口。
2。 选择 重新启动 选项并点击 回车键.
2. Ensure Strong Network Signal
You will not face any connectivity issues in your Windows 10 computer only if you have a strong network connection. If there are any obstacles between your router and your computer, they may interfere with the wireless signal and will cause intermittent connection problems.
1. 移动你的路由器 to some other place and check the internet connectivity.
2. Find the signal strength of your network and if it is very low, clear all the obstructions in between the way.
3. Avoid too many devices 连接到同一个网络。
4. 避免无线干扰 from devices like wireless headphones, head sets, TV and a lot more.
5. Move your PC closer to the router and check if the error recurs again.
3.重新启动路由器
This is a simple work around that will help you fix 0x00028001 error code within simple steps. This also ensures a strong and reliable network connection. Follow the below mentioned steps to restart your router. By doing so, you will establish a fresh internet connection between the client and the server. You can restart your router by following our guide Restart Router or Modem. Once your router has restarted, check if you can have fixed the error.
另请参阅: 修复 Windows 10 中找不到 WiFi 网络的问题
4. Reconnect to Internet
This is another simple workaround that fixes 0x00028001 error code. Your computer must connect either to Ethernet or to Wi-Fi network at a time. Check if this condition applies to your computer and if you guess any interruptions between your wired and wireless connections, reconnect them as instructed below.
1. Disconnect 您的网络连接,请等待一段时间,然后重新连接。
2。 如果 以太网电缆 已插入,请将其从电脑上拔下。然后,重新连接或将其连接到 Wi-Fi 网络。这将确保有线和无线连接之间不会闪烁。
5.禁用飞行模式
Enabling Airplane mode will disable WiFi, Bluetooth, cellular mode, all radio services, etc. Thus, you are advised to disable airplane mode to fix 0x00028001 error code. Usually, there is a dedicated key on your keyboard to enable or disable Airplane mode. Hit the key to do the same or implement the below-listed instructions.
1。 按下并按住不动 Windows + A keys 一起开 行动中心。 检查是否 飞行模式 打开了。
2A. If 飞行模式 is turned on, click on the setting to turn it off.
2B. If the 飞行模式 is not turned on, skip to the next method.
6. Enable Wi-Fi Connection
Sometimes, if the Wi-Fi adapters are not enabled on your PC, you will face 0x00028001 error code. But, there are a few simple instructions to enable WiFi on your computer.
1。 导航到 运行 对话框按 Windows + R键 在一起。
2。 类型 ncpa.cpl 并击中 回车键.
3. Now, right-click on your active 网络适配器 and check whether it is enabled or disabled.
3A。点击 启用 if the status is disabled.
3B. If the 状态 is already in Enable, move to the next method.
Check if you have fixed 0x00028001 error code is fixed.
另请参阅: How to Troubleshoot Network Connectivity Problems on Windows 10
Method 1: Restart Windows Explorer Process
Some users have reported that restarting Windows Explorer processes will help to resolve 0x00028001 error code. Follow the below-listed instructions to do the same.
1.点击 Ctrl + Shift + Esc 键 一起开 Task Manager.
2.在 流程 标签,点击 Windows资源管理器 并选择 重新启动 按钮。
3. Now, Windows Explorer restarts and 0x00028001 error code will be fixed now.
方法2:运行网络疑难解答
To fix various internet connectivity issues, you can use the inbuilt tool provided in Windows 10 PC whenever needed. By using the Windows network troubleshooter tool, you can analyze and diagnose any common network-related issues. It is a systematic process, when implemented step by step, will help you fix 0x00028001 error code. Follow our guide How to Troubleshoot Network Connectivity Problems on Windows 10 to learn basic troubleshooting steps to fix all network-related issues by using Windows Network Adapter troubleshooter.
You can use the steps mentioned in the guide to diagnose Wi-Fi connections, Ethernet, and all network adapters in your Windows 10 PC. Finally, check if you have fixed 0x00028001 error code.
另请参阅: 如何在 Windows 10 上重置网络设置
方法六:退出所有后台进程
If there are a bulk of background processes in your Windows 10 computer, you cannot access the network that easy, since all those processes will take a share of the network. Also, RAM consumption will be more and the performance of the device will slow down apparently. Follow our guide How to End Task in Windows 10 to close all other background processes in your Windows 10 PC.
After closing all the background processes, check if 0x00028001 error code is fixed or not.
方法五:修复系统文件
If there are any corrupt system files in your Windows Operating system, your PC may face a lot of internet connectivity issues. If you are experiencing 0x00028001 error code very recently, there are some chances that your computer files have become corrupt or damaged. Luckily, your Windows 10 PC has inbuilt repair tools like SFC (System File Checker) and DISM (Deployment Image Servicing and Management) that will help you fix all the corrupt files. Read our guide on How to Repair System Files on Windows 10 and follow the steps as instructed to repair all your corrupt files.
另请参阅: Fix Windows 10 Netwtw04.sys Blue Screen Error
方法 5:运行恶意软件扫描
Sudden virus or malware attack will result in network problems in your computer. If in case, the virus attack is very severe, you cannot connect to any network continuously at all. To resolve the problem, you have to remove the virus or malware completely from your Windows 10 computer. You are advised to scan your computer as instructed in our guide How do I Run a Virus Scan on my Computer?
另外,如果您想删除计算机中的恶意软件,请查看我们的指南如何在 Windows 10 中从您的电脑中删除恶意软件。
方法 6:更新 Windows
You can also eradicate software side bugs in your computer by updating your Operating System. Always ensure if you have updated your Windows Operating System and if there are any updates pending in action, use our guide How to Download and Install Windows 10 Latest Update
更新 Windows 操作系统后,检查是否可以连接到网络。
另请参阅: 修复 Windows 10 中计算机未显示在网络上的问题
方法 7:禁用 VPN 和代理服务器
Sometimes, inappropriate network configurations on your Windows 10 computer, you will face 0x00028001 error code. If you have installed any VPN service or use proxy servers on your PC, read our How to Disable VPN and Proxy on Windows 10 and implement the steps as instructed in the article.
After disabling the VPN client and proxy servers, check if you have fixed 0x00028001 error code. Still, if you face the same problem, try connecting to a 移动热点。
Method 8: Reset TCP or IP Protocol
TCP(传输控制协议)是一种重要的网络连接协议,它分配和识别 定位、竞价/采购和分析/优化数字媒体采购,但算法只不过是解决问题的操作和规则。 和 标准 互联网上的程序。 TCP/IP 协议负责传输发送方和接收方的数据包。如果在此过程中出现冲突,重置协议和 IP 地址将帮助您解决所讨论的问题。请按照我们的如何解决 Windows 10 上的网络连接问题指南来重置 TCP/IP。
After implementing the steps, check if you can fix network keeps dropping or not.
方法9:使用谷歌DNS
Domain Name System (DNS) addresses are responsible to establish a network connection between the client and server-side. Many technical experts have suggested that using Google DNS addresses helped them to fix 0x00028001 error code. To do so, follow our guide on How to change DNS settings in Windows 10.
另请参阅: 如何在 Windows 11 上更改 DNS 服务器设置
方法一:禁用省电模式
Sometimes, you may face 0x00028001 error code if you have enabled power-saving mode in your Windows 10 computer. This leads to several network connectivity problems. We advise you to disable power saving mode as instructed below.
1.点击 Windows键,类型 装置经理 并点击 可选.
2. Now, double-click on the 网络适配器 部分。
3. 然后,右键单击您的 网络适配器 并选择 查看房源 如图所示。
4. 然后,切换到 电源管理 在窗口 网络适配器属性 window and uncheck the box next to 让计算机关闭此设备以节省电量.
5.最后,点击 OK 保存更改。
Check if you have your computer is out of network connectivity issues.
Method 11: Enable Essential Services
To avoid and prevent 0x00028001 error code occurring in your PC, few essential services must have active status. When there is a problem with any of these services, you will face several conflicts in connecting to a network. Here are a few instructions to check if the essential services are running on your PC.
1。 类型 特色服务 在搜索框中,然后单击 可选.
2. Now, scroll down and search for the Windows EventLog 服务。
3。 检查 Status 服务。
3A. If the Status 被设置为 运行, right-click on the service and select the Stop 停止 option. Wait for a while and then click on Start 开始 一次。
3B. If the Status is 不能 设置 运行, right-click on the service and select the Start 开始 选项。
4. Repeat the above steps for the below 服务 也。
- 远程过程调用(RPC)
- Windows更新
- DHCP客户端
- 网络连接设备自动设置
- 网络连接代理
- 网络连接
- 网络连接助手
- 网络列表服务
- 网络位置感知
- 网络设置服务
- 网络存储接口服务
Finally, check if you have fixed the discussed issue.
另请参阅: 修复 Windows 无法自动检测该网络的代理设置
方法 12:暂时禁用防病毒软件(如果适用)
Some incompatible antivirus programs installed in your computer will cause network error 0x00028001 error code. To avoid conflicts, you must ensure the security settings of your Windows 10 computer and check if they are stable or not. To find whether the antivirus suite is the reason for network keeps dropping issue, disable it once and try connecting to a network. Read our guide on How to Disable Antivirus Temporarily on Windows 10 and follow the instructions to disable your Antivirus program temporarily on your PC.
If you did not face any internet connectivity issues after disabling the antivirus program in your computer, you are advised to uninstall the program completely from your PC. Read our guide Force Uninstall Programs which won’t Uninstall In Windows 10 to uninstall your antivirus program in your computer.
方法 13:禁用 Windows Defender 防火墙(不推荐)
Like antivirus program, Windows Defender Firewall in your computer might prevent internet access, for some security reasons. If in case, WiFi network has been blocked by Windows Defender Firewall, you have to enable it or disable the Firewall securities temporarily from your computer. If you do not know how to disable Windows Defender Firewall, our guide How to Disable Windows 10 Firewall will help you do so.
方法14:更新网络驱动程序
始终确保您是否使用更新的网络驱动程序,并且如果有任何更新待执行,建议您下载并安装相同的更新。请按照我们的如何更新 Windows 10 上的网络适配器驱动程序指南来执行此操作。更新网络驱动程序后, 重新启动 your computer and test the network connection. You will not 0x00028001 error code again.
另请参阅: 修复以太网没有有效 IP 配置错误
方法15:重新安装网络驱动程序
Still, if you face 0x00028001 error code even after updating network drivers, there is another fix to delete all the drivers in your computer and reinstall them again. This process stabilizes the network connectivity problems thereby resolving network keeps disconnecting Windows 10 issue. Follow our guide How to Uninstall and Reinstall Drivers on Windows 10 to reinstall drivers in your Windows 10 computer.
重新安装网络驱动程序后,检查是否可以正常连接网络。
方法 16:回滚网络驱动程序
All the current versions drivers will be deleted from your PC and previous version of them will be installed when you roll back your network drivers. This is a helpful feature when any new driver is incompatible with the system. Follow the steps as instructed in our guide How to Rollback Drivers on Windows 10 to fix 0x00028001 error code.
当您的Windows 10计算机安装了以前版本的驱动程序后,检查是否可以不间断地连接网络。
方法17:重置网络设置
Several users have declared that, resetting network settings will resolve strange network connection issues. This method will forget all the network configuration settings, saved credentials, and a lot more security software like VPN and antivirus programs. To do so, follow our guide on How to Reset Network Settings on Windows 10
另请参阅: 如何在 Windows 10 上设置网络文件共享
方法 18:执行系统还原
If you have recently updated your Windows 10 operating system and later facing network error 0x00028001 error code, the latest Windows update components may interfere with any software present in your computer and may cause network keeps disconnecting Windows 10 issue. So, in this case, you must restore your computer to the previous version when it was working fine. To do so, follow our guide on How to use System Restore on Windows 10 and implement the instructions as demonstrated.
After restoring your Windows 10 PC, check if you can connect to any network without any problems.
方法 19:重置电脑
If none of the methods have helped you fix 0x00028001 error code, then you have to clean install your Windows Operating System. To clean boot your computer, implement the steps as instructed in our guide How to do a Clean Install of Windows 10
Method 20: Contact Internet Service Provider
Last but not the least, you have to seek for technical support if above-listed methods fail to resolve network error 0x00028001 error. If your modem does not communicate with your Internet Service Provider, a lot more technical connectivity problems arise in your device.
For instance, when you try to register your modem but face troubles during the process, several authentication attempts will slow down your network connection. This will lead to 0x00028001 error. So, in this case you have to contact your Internet Service Provider to diagnose and resolve the problem. The Internet Service Providers will check whether the devices are updated, compatible and properly registered.
推荐:
我们希望本指南对您有所帮助并且您可以修复 network error 0x00028001 in Windows 10. Let us know what you want to learn about next. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.