If you don’t see Wireless Adapter under Network Connections neither there is a Network adapter tab under device manager then it seems like your Network Adapter is missing or not detected on your Windows 10 which is a serious issue because you won’t be able to access the Internet until the issue is resolved. In short, when you click on the Wireless icon on the system tray there won’t be any device listed in order to connect to the Internet and if you open Device Manager then you won’t see the Network Adapter tab.
These are the reasons behind the Network Adapter missing issue:
- Network adapter missing in Device manager
- No Network Adapters showing in Device Manager
- Network Adapter Not Detected
- Network Adapter Not Found Windows 10
- No Network Adapter In Device Manager
The main cause of this issue seems to be outdated, incompatible or corrupted Network Adapter drivers. If you have recently upgraded from previous versions of Windows then it’s possible that the old drivers will not work with the new Windows and hence the issue. So without wasting any time let’s see how to actually Fix Network Adapter Missing in Windows 10 issue with the below-listed troubleshooting steps.
Note: Just make sure to uninstall any VPN software on your PC before continuing.
Fix Network Adapter Missing in Windows 10
确保创建一个还原点,以防出现问题。
Method 1: Reboot your Computer
Most of us know about this very basic trick. Rebooting your computer can sometimes fix any software conflict by giving it a fresh start. So if you are someone who would rather put their computer on sleep, restarting your computer is a good idea.
1。 点击 “开始”菜单 然后点击 电源按钮 available at the bottom left corner.
2.接下来,点击 重新启动 option and your computer will restart itself.
After the computer restarts, check if your problem is resolved or not.
Method 2: Flush DNS and Reset Winsock Components
1. Open elevated Command Prompt.
2. 现在键入以下命令,并在每一条命令后按 Enter 键:
ipconfig / release命令 IPCONFIG / FLUSHDNS的 使用ipconfig / renew
3. Again open Command Prompt and type the following command one by one and hit enter after each one:
ipconfig /flushdns nbtstat –r netsh int ip 重置 netsh Winsock 重置
4. 重新启动以应用更改。刷新 DNS 似乎 Fix Network Adapter Driver Issues on Windows 10.
Method 3: Run WWAN AutoConfig Service
1. 按 Windows 键 + R,然后输入 SERVICES.MSC 并按Enter键。
2。 找 WWAN AutoConfig Service in the list (press W to reach to the end of the list quickly).
3.双击 WWAN AutoConfig Service.
4. If the service is already running then click on Stop, then from the Startup type drop-down select 自动。
5. Click Apply followed by OK.
6.右键单击 WWAN AutoConfig Service 并选择 开始。
Method 4: Update Network Adapter Drivers
1. Press Windows key + R and type “输入devmgmt.msc” in Run dialogue box to open 装置经理。
2. 展开 网络适配器,然后右键单击您的 Wi-Fi控制器 (例如 Broadcom 或 Intel)并选择 更新驱动程序软件。
3. 现在选择“Search for automatically for updated driver software“。
4。 现在 Windows will automatically search for the Network driver update and if new update is found, it will automatically download and install it.
5. Once finished, close everything and reboot your PC.
6. If you’re still facing the Network Adapter Missing in Windows 10 issue, then again right-click on your WiFi controller and select 更新驱动程序 在设备管理器中。
7. Now, in the Update Driver Software Windows, select “浏览我的电脑以获取驱动软件。“
8. 现在选择“让我从计算机上的可用驱动程序列表中进行选择。“
9. 尝试 update drivers from the listed versions (make sure to checkmark compatible hardware).
10. If the above didn’t work then go to 制造商的网站 更新驱动程序。
11. Download and install the latest driver from the manufacturer’s website then restart your PC.
Method 5: Uninstall Network Adapter Drivers
1. 按 Windows 键 + R,然后输入“输入devmgmt.msc”并按 Enter 键打开设备管理器。
2.展开网络适配器并找到 您的网络适配器名称。
3。 确保你 记下适配器名称 万一出了问题。
4. Right-click on your network adapter and uninstall it.
5. It will ask for confirmation 选择是。
6. Restart your PC and Windows will automatically install the network adapter drivers again.
7. If the drivers are not installed automatically then again open the Device Manager.
8. From the Device Manager menu, click on 操作 然后点击“扫描硬件更改“。
方法 6:确保 Windows 是最新的
1。 按 Windows键+ I to open Settings then click on 更新和安全性。
2. From the left-hand side, menu click on Windows更新。
3. Now click on the “检查更新” button to check for any available updates.
4. If any updates are pending then click on Download & Install updates.
5. Once the updates are downloaded, install them and your Windows will become up-to-date.
6. After the updates are installed reboot your PC to save changes.
方法 7:运行网络适配器疑难解答
1. 按 Windows 键 + I 打开“设置”,然后单击 更新和安全性。
2. From the left-hand menu select 故障排除。
3. Under Troubleshoot click on 互联网连接 依次 运行疑难解答。
4. 按照屏幕上的进一步说明运行故障排除程序。
5. If the above didn’t fix the issue then from the Troubleshoot window, click on 网络适配器 然后点击 运行疑难解答。
5. 重新启动您的电脑以保存更改并查看是否能够 fix the Network Adapter Missing issue.
Method 8: Install Intel PROSet/Wireless Software
Sometimes the problem is caused due to outdated Intel PROSet Software, hence updating it seems to fix Network Adapter Missing in Windows 10 issue。 因此, 去这里 and download the latest version of PROSet/Wireless Software and install it. This is a third party software which manages your WiFi connection instead of Windows and if PROset/Wireless Software is outdated is can cause drivers issue in 无线网络适配器。 Hence, read How to Update Network Adapter Drivers on Windows 10.
方法六:重置网络连接
1. 按 Windows 键 + I 打开“设置”,然后单击 网络和互联网。
2. From the left-hand menu select 状态。
3. Now scroll down and click on 网络重置 在底部。
4. 再次点击“立即重置” under Network reset section.
5. This will successfully reset your network adapter and once it is complete the system will be restarted.
方法 10:执行系统还原
System Restore always works in resolving the error, therefore System Restore can definitely help you in fixing this error. So without wasting any time run system restore in order to resolve Network Adapter Missing issue.
Method 11: Using elevated Command Prompt
1. 按 Windows 键 + X,然后选择 命令提示符(管理员)。
2. 在 cmd 中输入以下命令并按 Enter 键:
netcfg –sn
3. This will display a list of networking protocols and in that list find DNI_DNE.
4. If DNI_DNE is listed then type the following command into cmd:
reg删除HKCRCLSID {988248f3-a1ad-49bf-9170-676cbbc36ba3} / va / f
netcfg -v -u dni_dne
5. If you don’t see DNI_DNE listed then only run the command netcfg -v -u dni_dne.
6. Now if you receive the error 0x80004002 after trying to run the above command then you need to delete the above key manually.
7. 按 Windows 键 + R,然后输入 注册表编辑器 并按Enter键。
8. Navigate to the following Registry Key:
HKEY_CLASSES_ROOTCLSID{988248f3-a1ad-49bf-9170-676cbbc36ba3}
9. Delete this key and then again type netcfg -v -u dni_dne command in cmd.
10. 重新启动电脑以保存更改。
为你推荐:
这样你就成功了 Fix Network Adapter Missing in Windows 10 但如果您对这篇文章仍有任何疑问,请随时在评论部分提问。