Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
重新启动并选择正确的启动设备问题[已解决]
Method 1: Set Correct Boot Order
You may be seeing the error “Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1.当您的计算机启动时(在启动屏幕或错误屏幕之前),重复按Delete或F1或F2键(取决于您的计算机制造商) 进入BIOS设置.
2.进入 BIOS 设置后,从选项列表中选择引导选项卡。
3.现在确保计算机 硬盘或 SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.
4.Finally, press F10 to save this change and exit. This must have Fix Reboot and Select Proper Boot Device Issue,如果没有则继续。
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
要运行诊断程序,请重新启动 PC,并在计算机启动时(启动屏幕之前)按 F12 键,当出现启动菜单时,突出显示启动到实用程序分区选项或诊断选项,然后按 Enter 键启动诊断程序。这将自动检查系统的所有硬件,并在发现任何问题时报告。
推荐: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
重要提示: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1.插入 Windows 10 可启动安装 DVD 并重新启动电脑。
2. 当提示按任意键从 CD 或 DVD 启动时,按任意键继续。
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.重启就成功了 Fix Reboot and Select Proper Boot Device issue, if not, continue.
另请参阅如何修复自动修复无法修复您的电脑的问题。
方法 5:启用 UEFI 启动
1.重新启动您的电脑,然后根据您的电脑点击 F2 或 DEL 打开启动设置。
2.The make the following changes:
将启动列表选项更改为 UEFI 禁用加载传统选项 ROM 启用安全启动
3.接下来,点击 F10 保存并退出引导设置。
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
请注意: Always mark the System Reserved Partition (generally 100mb) active and if you don’t have a System Reserved Partition then mark C: Drive as the active partition.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
方法 7:修复安装 Windows 10
如果上述解决方案都不适合您,那么您可以确定您的硬盘没有问题,但您可能会看到错误“Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key”因为操作系统或硬盘上的 BCD 信息被某种方式删除了。那么,在这种情况下,您可以尝试修复安装 Windows,但如果这也失败,那么剩下的唯一解决方案就是安装 Windows 的新副本(全新安装)。
这样你就成功了 固定 Reboot and Select proper Boot device issue 但如果您对这篇文章仍有任何疑问,请随时在评论部分提问。