Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Thread Stuck In Device Driver Error in Windows 10 is a BSOD (Blue Screen Of Death) error which is caused by a driver file caught in an endless loop. The stop error code is 0x000000EA and as the error, itself suggests it’s the device driver issue rather than a hardware problem.

Anyway, the fix for the error is simple, update the drivers or BIOS and the problem is resolved in all most all the cases. If you can’t boot into Windows to perform the below-listed steps then boot your computer into safe mode using the installation media.

Depending on your PC you may receive one of the following errors:

• THREAD_STUCK_IN_DEVICE_DRIVER
• STOP Error 0xEA: THREAD_STUCK_IN_DEVICE_DRIVER
• The THREAD_STUCK_IN_DEVICE_DRIVER bug check has a value of 0x000000EA.

Few of the cause which can lead to Thread Stuck In Device Driver error are:

• Corrupt or old device drivers
• 安装新硬件后，驱动程序发生冲突。
• Error 0xEA blue screen caused by a damaged video card.
• Old BIOS
• 记性不好

Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

因此，不浪费任何时间，让我们看看如何 Fix Thread Stuck In Device Driver Error in Windows 10 借助下面列出的故障排除指南。

方法1：更新显卡驱动程序

If you’re facing the Thread Stuck In Device Driver Error in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face issues such as screen flickering, screen turning on/off, display not working correctly, etc you may need to update your graphics card drivers in order to fix the underlying cause. If you face any such issues then you can easily update graphics card drivers with the help of this guide.

方法2：禁用硬件加速

1. 按 Windows 键 + I 打开 个人设置 然后点击 系统。 

2. From the left-hand side menu, select 屏 显：. Now at the bottom of the Display window, click on the Advanced display settings.

3。 现在去 the Troubleshoot tab 并点击 更改设置。

4。 拖动 Hardware Acceleration slider 无

5. Click Ok then Apply and restart your PC.

6. If you don’t have the troubleshoot tab then right-click on the desktop and select NVIDIA控制面板 (Every graphic card has their own control panel).

7. From the NVIDIA Control Panel, select “Set PhysX configuration” from the left column.

8. Next, under select, a PhysX processor make sure the CPU is selected.

9. Click Apply to save the changes. This will disable NVIDIA PhysX GPU acceleration.

10. 重新启动您的电脑，看看是否可以 fix thread stuck in device driver error in Windows 10, if not, continue.

Method 3: Run SFC and DISM tool

1. 按 Windows 键 + X，然后单击 命令提示符（管理员）。

2. 现在在 cmd 中输入以下内容并按 Enter 键：

Sfc / scannow

3. 等待上述过程完成，完成后重新启动您的电脑。

4. If you are able to fix Thread Stuck in device driver error in Windows 10 issue then great, if not then continue.

5. 再次打开 cmd 并键入以下命令，并在每条命令后按 Enter 键：

Dism /Online /Cleanup-Image /CheckHealth Dism /Online /Cleanup-Image /ScanHealth Dism /Online /Cleanup-Image /RestoreHealth

6. 运行 DISM 命令并等待其完成。

7.  If the above command doesn’t work then try on the below:

Dism /Image:C:offline /Cleanup-Image /RestoreHealth /Source:c:testmountwindows Dism /Online /Cleanup-Image /RestoreHealth /Source:c:testmountwindows /LimitAccess

请注意： 将 C:RepairSourceWindows 替换为修复源（Windows 安装或恢复光盘）的位置。

7. 重新启动电脑以保存更改。

Method 4: Perform Windows update

Sometimes pending Windows update can cause a problem with the drivers, hence it’s recommended to update Windows.

1。 按 Windows键+ 我打开“设置”，然后单击 更新和安全性。

2. 在左侧菜单中单击 Windows更新。

3. 现在单击“检查更新”按钮来检查是否有任何可用的更新。

4. 如果有任何更新待处理，请单击 下载并安装更新。

5. 下载更新后，安装它们，您的 Windows 将变为最新状态。

6. 安装更新后，重新启动您的电脑以保存更改。

Method 5: Run Windows 10 BSOD Troubleshooter

If you are using Windows 10 Creators update or later, you can use Windows inbuilt Troubleshooter to fix Blue Screen of Death Error (BSOD).

1. Press Windows key + I to open Settings then click on ‘更新与安全“。

2. From the left pane, select ‘疑难解答“。

3. 向下滚动到 '查找并解决其他问题' 部分。

4。 点击 '蓝屏'并点击'运行疑难解答“。

Method 6: Give Graphics Card Access to the Application

1. 按 Windows 键 + I 打开“设置”，然后单击 系统。

2. 从左侧菜单中选择 屏 显： 然后点击 Graphics settings link 在底部。

3. Select the type of app, if you can’t find your app or game in the list then select the 经典应用 and then use the “浏览“ 选项。

4. Navigate to your application or game，选择它，然后单击 打开。

5. Once the app is added to the list, click on it then again click on 选项​​。

6。 选择 ”高性能” and click on Save.

7. 重新启动电脑以保存更改。

Method 7: Update BIOS (Basic Input/Output System)

BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10. Sometimes, the older BIOS doesn’t support new features and that is why you can face the Thread Stuck in device driver error. In order to fix resolve the underlying issue, you need to update BIOS using this guide.

Method 8: Reset Overclocking Settings

If you’re overclocking your PC then this might explains why you’re facing the Thread Stuck in device driver error, as this overclocking software puts a strain on your PC hardware which is why PC restarts unexpectedly giving the BSOD error. To fix this issue simply reset the overclocking settings or remove any overclocking software.

Method 9: Faulty GPU

Chances are the GPU installed on your system might be faulty, so one way to check this is to remove the dedicated graphic card and leave the system with only integrated one and see if the issue is resolved or not. If the issue is resolved then your GPU is faulty and you need to replace it with a new one but before that, you could try cleaning your graphic card and again place it in the motherboard to see it’s working or not.

方法九：检查电源

A faulty or failing Power Supply is generally the cause for the Bluescreen of death errors. Because the power consumption of hard disk is not met, it won’t get enough power to run, and subsequently, you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

If you have recently installed new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporarily remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

这样你就成功了 Fix Thread Stuck In Device Driver Error in Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.