Fix Mac Software Update Stuck Installing

The best part about owning a MacBook is the regular macOS updates that make the system more efficient. These updates improve the security patches and bring in advanced features, keeping the user in touch with newer technology. However, sometimes you may face some issues updating the latest macOS such as Mac stuck on the loading bar or Mac stuck on Apple logo. Nevertheless, this article will explain ways to fix Mac software update stuck installing issue.

How to Fix Mac Software Update stuck installing 

Your MacBook won’t update to the latest macOS version when the update process gets interrupted, somehow. Then, you might find your Mac stuck on loading bar or Mac stuck on Apple logo. Some possible causes for this interruption are as follows:

• 電池問題: If your MacBook is not charged properly, the installer might not get downloaded as your laptop may switch off midway.
• 缺乏儲存空間: Another reason why Mac software update stuck installing is that there might be lesser space on your system than what is required for the update.
• 互聯網問題: It is always recommended to download a new update at night, when there is less traffic on the Wi-Fi network. At this time, the Apple servers are also not crowded, and you can quickly download the latest version.
• 內核恐慌: This is a very common problem where your computer may get stuck in a loop of booting and crashing. If the laptop does not boot properly, the operating system won’t get updated successfully. It happens if your drivers are outdated and/or keep conflicting with your plug-ins, causing Mac stuck on Apple logo and Mac stuck on loading bar errors.

Now that you know about a few reasons why your Mac won’t update to the latest macOS, let us take a look at how to update macOS.

How to Update macOS?

您可以 檢查可用的更新 on your Mac device as follows:

1。 點擊 系統偏好設定 ，在 蘋果菜單。

2. 在這裡，點擊 軟件更新，如圖所示。

3。 選擇 現在更新， 如圖所示。

注意： If your Mac device is older than five years or more, it is probably best to leave it with the current OS and not overburden the system with a fresh update.

How to Check macOS Compatibility?

It is quite evident from the heading itself that the update you are trying to install should be compatible with the device model you are using for it to run properly. Here’s how you can check as well as download it from the 應用商店:

1。 啟動 App Store 您的設備上。

2. 搜索 relevant update, for example, Big Sur or Sierra.

3. 向下滾動並點擊 相容性 to check for it

4A. If you get this message: Works on your Mac, the said update is compatible with your Mac device. Click on 積極 開始安裝。

4B. If the desired update isn’t compatible then, it is useless trying to download it as it can cause your device to crash. Or, your Mac stuck on loading bar or Mac stuck on Apple logo issue might appear.

Method 1: Try Installing After Some Time

This might sound like a vague idea, but giving some time to the system to fix its issues might solve Mac software update stuck installing issue. When you use your computer for a significant amount of time, background applications keep draining your battery and keep using network bandwidth. Once these get disabled, your macOS may update normally. Also, if there are issues from the 蘋果伺服器 end, it will be resolved as well. Therefore, we recommend you to wait 24 to 48 hours before attempting to install the latest macOS once again.

方法二：清理儲存空間

Installing new updates usually entails large storage space being taken up on your device. Thus, it is essential to ensure your system has the requisite space to download and install a new update. Here’s how to check for storage space on your Mac:

1。 點擊 Apple菜單 在主屏幕上。

2。 點擊 關於本機， 如圖所示。

3。 導航 儲存應用，如下圖所示。

4. If your Mac does not have enough storage space for an OS update, make sure to 釋放 空間 by removing unwanted, unnecessary content.

Method 3: Ensure Internet Connectivity

You must have access to a strong, stable internet connection with good speed for macOS updates. Losing internet connectivity halfway through the update process could lead to Kernel panic. You can check the speed of your internet through speedtest webpage. If the test shows your internet to be slow, then 重啟你的路由器 to fix the issue. If the problem persists, contact your internet service provider.

相關閱讀： 網路連線速度慢？加快網路速度的 10 種方法！

方法 4：重新啟動 Mac

The easiest way to troubleshoot the Mac software update stuck installing issue is by restarting your device.

備註: Sometimes, updating the latest macOS requires a lot of time. So, it may seem stuck, but in reality, the computer is installing the new update. Any hindrance in the installation process may lead to the Kernel error as described earlier. Hence, it is wise to let the computer update all night before rebooting it.

Now, if you see that your updating window has been stuck i.e. Mac stuck on Apple logo or Mac stuck on loading bar, try this:

1。 按 電源按鈕 並保持 10 秒鐘。

2. Then, wait for the computer to 重新開始.

3. Begin the 更新 再來一次。

Method 5: Remove External Devices

Being connected to external hardware such as hard drives, USB, etc., can cause Mac software update stuck installing issue. Hence, disconnect all unrequired external hardware before attempting to update it to the latest version.

Method 6: Put Date and Time to Set Automatically

While trying to update your macOS to the latest version, you may receive an error notification stating 未找到更新. This can be due to incorrect date and time settings on your device. In this case, follow the given steps:

1。 點擊 蘋果圖標 at the top left corner of your screen. 

2。 “ 蘋果菜單 現在將出現。

3。 選擇 系統偏好設定 > 日期和時間. 

4. 選取標題為“ 自動設置日期和時間，如下所示。

相關閱讀： 解決 MacBook 啟動緩慢的 6 種方法

方法 7：以安全模式啟動 Mac

Fortunately, Safe Mode can be attained in both Windows and macOS. This is a diagnostic mode in which all the background applications and data is blocked, and one can figure out why certain function won’t take place properly. Therefore, you can also check the status of the updates in this mode. The steps to open safe mode on a macOS are as follows:

1. If your computer is 切換到，按一下 蘋果圖標 at the top left corner of the screen and select 重新啟動。 

2. While it restarts, press and hold the Shift鍵. 

3。 一旦 蘋果圖標 appears again, release the Shift key. 

4. Now, confirm if you have logged in to 安全模式 點擊 蘋果圖標.

5。 選擇 System Report in 關於這台Mac 窗口。

6。 點擊 軟體， 如圖所示。

7. Here, you will see 安全 在 引導模式.

注意： 如果您 別看 安全 under the Boot Mode, then follow the steps from the start again.

Once your Mac is in Safe mode, you can try installing the update once again.

Method 8: Boot Mac in Recovery Mode

If none of the above-mentioned methods works for you, then try reinstalling the update in Recovery Mode. Updating your operating system in the recovery mode does two things:

• It makes sure that none of your files gets lost during the chaotic download. 
• It helps to rescue the installer which you are utilizing for your update.

Using the Recovery Mode is also a very good alternative since it allows connecting to the Internet. Follow the given steps to switch on your laptop in Recovery Mode:

1。 點擊 蘋果圖標 at the top left corner of your screen. 

2。 選擇 重新啟動 from this menu, as shown.

3. While your MacBook restarts, press and hold the Command + R keys 在鍵盤上。 

4. Wait for about 20 seconds or until you see the 蘋果標誌 在你的屏幕上。

5. 輸入您的 用戶名 和 密碼， if and when prompted.

6。 現在 macOS 實用程序 window will appear. Here, select 重新安裝macOS，如圖所示。

另請閱讀: How to Use Utilities Folder on Mac

Method 9: Reset PRAM

Resetting the PRAM settings is a great alternative to troubleshoot any issues on the Mac operating system.

1. 軸體 off MacBook。 

2. Immediately, turn the system ON.

3。 按 Command + Option + P + R. 鍵盤上的按鍵。 

4. Release the keys after you see the 蘋果圖標 reappear for the second time.

注意： You will see the Apple logo appear and disappear 三次 during the process. After this, the MacBook should 重啟 一般。 

5。 打開 系統偏好設定 ，在 Apple菜單.

6. 重設 the settings such as Date & Time, Display resolution, etc.

You may now try updating your latest macOS once again as Mac software update stuck installing problem should be fixed, by now.

Method 10: Restore Mac to Factory Settings

Restoring a MacBook to factory or default settings automatically reinstalls Mac operating system. Therefore, it is also capable of removing any bugs or corrupt files which may have later crept into your system.

注意： However, before resetting your MacBook, make sure that you have a backup of all your data since the factory reset will delete all the data from the system.

Follow these steps to restore Mac to Factory Settings:

1. Restart your Mac in 恢復模式 如中所解釋的 方法8。

2。 打開 磁盤工具 從蘋果機 實用 夾.

3。 選擇 startup disk, For example: Macintosh HD-Data.

4.現在，單擊 抹去 從頂部菜單欄。

5。 選擇 MacOS Extended (Journaled），然後點擊 抹去.

6.接下來，打開 Disk Utility Menu 通過選擇 瀏覽 在左上角。

7。 選擇 退出 磁盤工具。

8.最後，點擊 重新安裝MacOS in the macOS Utilities文件夾.

Method 11: Visit Apple Store

If none of the above-mentioned methods worked for you, it is wise to contact an 蘋果商店 near you. You can also communicate your issue on the 蘋果網站 through chat. Make sure to keep your purchase receipts and warranty card handy. You can easily Check Apple Warranty Status.

常見問題

Q1. Why Can’t I Update My Mac?

Your Mac may not update because of the following reasons: Slow Wi-Fi connection, Low storage space on the computer, Outdated device drivers, and Battery issues.

Q2. How do I upgrade my Mac to the latest version?

To upgrade your Mac to the latest version, follow the given steps:

• 點擊 蘋果圖標 at the top left corner of your screen and select 系統偏好設定. 
• 選擇 軟件更新 從此菜單。
• You will now be able to see if any update is available. In case it is, click on 現在更新。

推薦：

We hope all these methods were able to help you fix Mac software update stuck installing issue. In case you have any further queries, don’t hesitate to put them down in the comment section below, and we will get back to you as soon as possible.