When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Uhlelo lokusebenza oluphelelwe yisikhathi.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe isithonjana.
2. If the status is set to Ayixhumekile, chofoza ku Network globe icon, choose your Wi-Fi network and click on Xhuma button. Make sure Imodi yendiza ayivuliwe.
3. If you again face the same network connection error code, then click on the Khubaza button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Qhafaza kwesokudla ku- Isithonjana se-Wi-Fi Bese ukhetha Open Network & Internet settings.
I-6. Chofoza Wi-Fi.
7. Scroll down the right menu, click on Phatha amanethiwekhi owaziwayo.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Khohlwa.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Indlela yoku-2: Qala kabusha i-Router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Qaphela: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
I-1. Thola Inkinobho yamandla at the back of your router.
2. Press the button once to icishe.
3. Manje, nqamula yakho Router power cable futhi ulinde kuze kube yilapho amandla ephela ngokuphelele kuma-capacitors.
4. Bese, ukuxhuma kabusha the intambo yamandla bese uyivula ngemva komzuzu.
5. Wait until the network connection is re-established and try signing in again.
Funda futhi: Fix Computers Not Showing Up on Network in Windows 10
Indlela 3: Run Network Troubleshooter
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Shaya i Ukhiye weWindows bese uthayipha Izilungiselelo zokuxazulula izinkinga kubha yokusesha kanye Vula.
I-2. Chofoza Abaxazululi abaxazululwayo abengeziwe.
I-3. Khetha Isixhumo se-Network bese uchofoza Qalisa isixazululi senkinga.
4. Select the network adapter to diagnose bese uchofoza Olandelayo.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, chofoza Vala isixazululo.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Funda futhi: Lungisa Ukwabelana Komndeni I-YouTube TV Akusebenzi
Indlela yesi-4: Lungisa Amafayela Esistimu
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (I-System File Checker) /DISM (Ukuthunyelwa kwesithombe nokuphathwa) utilities on your Windows 10 PC.
1. Shaya i Ukhiye weWindows, thayipha I-Command Prompt bese uchofoza Qalisa njengomphathi.
I-2. Chofoza Yebo ku Ukulawulwa Kwe-akhawunti Yomsebenzisi ngokushesha.
I-3. Thayipha chkdsk C: / f / r / x umyalo bese ushaya Faka ukhiye.
4. Uma ucelwa umlayezo, I-Chkdsk ayikwazi ukusebenza...ivolumu i... isasetshenziswa, bese, thayipha Y bese uyishaya Faka ukhiye.
5. Futhi, thayipha umyalo: sfc / scannow bese ucindezela Faka ukhiye ukugijima i I-System File Checker scan.
Qaphela: Ukuskena kwesistimu kuzoqaliswa futhi kuzothatha amaminithi ambalwa ukuqeda. Okwamanje, ungaqhubeka nokwenza eminye imisebenzi kodwa qaphela ukuthi ungalivali iwindi ngephutha.
Ngemva kokuqeda ukuskena, izobonisa noma yimuphi wale milayezo:
- I-Windows Resource Protection ayitholanga ukwephulwa kobuqotho.
- I-Windows Resource Protection ayikwazanga ukwenza umsebenzi oceliwe.
- I-Windows Resource Protection ithole amafayela onakele futhi yawalungisa ngempumelelo.
- IWindows Resource Protection ithole amafayela onakele kodwa ayikwazanga ukulungisa amanye awo.
6. Uma ukuskena sekuphelile, Qala kabusha i-PC yakho.
7. Futhi, qalisa Misa ukuphinda njengomlawuli bese ukhipha imiyalo enikeziwe ngokulandelana:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image/startcomponentcleanup
Qaphela: Kufanele ube nokuxhumeka kwe-inthanethi okusebenzayo ukuze wenze imiyalo ye-DISM ngendlela efanele.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Shaya i Ukhiye weWindows bese uthayipha Umphathi wedivayisi in the Windows search menu. Click on Vula.
2. Nweba i- Ama-adapters wenethiwekhi ingxenye ngokuchofoza kabili kuyo.
3. Chofoza kwesokudla kweyakho Umshayeli wenethiwekhi (Ngokwesibonelo, Intel (R) Dual Band Wireless-AC 3168) bese ukhetha Khubaza idivayisi inketho.
4. Confirm the below prompt by clicking on Yebo.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Vumela idivayisi inketho.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Funda futhi: Ukulungisa I-Windows ayikwazanga ukuthola ngokuzenzakalelayo izilungiselelo ze-Proxy Yenethiwekhi
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Go to the search menu and type cmd. Chofoza Qalisa njengomphathi.
2. Thayipha okulandelayo imiyalo bese uyishaya Faka ukhiye.
I-neth winsock kabusha ukusetha kabusha kwe-netsh int ip ipconfig / ukukhululwa ipconfig / uvuselele
3. Linda ukuthi imiyalo ilandelwe futhi qalisa kabusha i-PC yakho.
Indlela 7: Sula i-DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
I-1. Qalisa I-Command Prompt by searching in the Windows imenyu and click on Run as administrator.
I-2. Thayipha ipconfig / flushdns in the command window and hit Faka.
Funda futhi: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Qalisa Qalisa ibhokisi lengxoxo ngokucindezela Okhiye beWindows + R ndawonye.
I-2. Thayipha ncpa.cpl bese ushaya Faka ukhiye.
3. Right-click on your active i-adaptha yenethiwekhi bese uchofoza Izakhiwo.
4. Susa ukumaka i I-Internet Protocol Version 6 (TCP / IPv6) inketho.
5. Ekugcineni, chofoza OK to save the changes and check if the issue is resolved.
Qaphela: If you use multiple network connections, navigate to Isikhungo Nokwabelana futhi Shintsha i-adaptha settings. Right-click on the adapter and select Khubaza. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
I-1. Thayipha Umphathi wedivayisi in the Windows search menu and click Vula.
2. Chofoza kabili ku- Ama-adapters wenethiwekhi ukuyikhulisa.
3. Chofoza kwesokudla kweyakho Umshayeli (isib I-Intel(R) Dual Band Wireless-AC 3168) bese uchofoza Buyekeza umshayeli.
I-4. Chofoza Ngibhekabheka ikhompyutha yami ukuthola abashayeli to locate and install a driver manually.
5. Chofoza ku- Isiphequluli button to choose any directory and click on Olandelayo.
5A. The drivers will be updated to the latest version if they are not updated.
5B. Uma sezivele zisesigabeni esibuyekeziwe, isikrini sibonisa umyalezo olandelayo, Izishayeli ezihamba phambili zedivayisi yakho sezifakiwe.
I-6. Chofoza Close ukuphuma ngewindi.
7. Qala kabusha the computer, and check if you have fixed the error.
Option II: Reinstall Driver
I-1. Qalisa Umphathi wedivayisi from the Windows search menu.
2. Qhafaza kwesokudla ku- Umshayeli Bese ukhetha Khipha idivayisi.
3. A warning prompt will be displayed on the screen. Check the box “Susa isofthiwe yokushayela yale divayisi” and confirm the prompt by clicking Khipha.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Vakashela i- iwebhusayithi yomkhiqizi.
2. Thola futhi Thwebula abashayeli abahambisana nenguqulo ye-Windows ku-PC yakho.
3. Once downloaded, double click on the ifayela elilandiwe bese ulandela imiyalelo enikeziwe ukuze uyifake.
Funda futhi: Ungayisetha kanjani i-VPN Windows 10
Indlela 10: Vuselela iWindows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
I-1. Cindezela u IWindows + I okhiye ndawonye ukuvula Amasethingi kukhompyutha yakho.
I-2. Khetha Ukuvuselelwa nokuphepha.
I-3. Khetha Hlola izibuyekezo.
4A. Click Faka manje to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Unolwazi lwakamuva umlayezo.
Indlela 11: Khipha Izibuyekezo Zakamuva
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Cindezela bese ubamba Okhiye beWindows + R ndawonye ukuvula i Qalisa ibhokisi lengxoxo.
I-2. Thayipha appwiz.cpl bese ushaya Faka.
I-3. Chofoza Buka izibuyekezo ezifakiwe.
4. Select the most recent update and click on Khipha.
5. Confirm the prompt, if any, and qala kabusha i-PC.
Funda futhi: Uyilungisa kanjani iFirefox ingalayishi amakhasi
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Qaphela: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Amasethingi ke System futhi Mayelana. Once you have reset your network, you have to reinstall all networking software like Amaklayenti we-VPN or Amaswishi abonakalayo.
1. Cindezela bese ubamba Windows + I okhiye ndawonye ukuvula Izilungiselelo zeWindows.
I-2. Chofoza Inethiwekhi ne-Inthanethi.
I-3. Chofoza Ukusetha kabusha kwenethiwekhi ngaphansi Isimo.
4. Qinisekisa umyalo ngokuchofoza ku Setha kabusha manje.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Kunconywe:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.