Maak Amazon KFAUWI-toestel reg wat op die netwerk verskyn

Windows 10 updates are notorious for prompting new problems followed by a severe headache to its users. After installing one of these problematic updates, you may notice an unknown device named Austin- Amazon of KFAUWI listed among your Network devices. It is natural for you to get worried upon noticing something fishy, be it an application or a physical device. What is this strange device? Should you be alarmed by its presence and has your PC security been compromised? How to fix Amazon KFAUWI device showing up on network issue? We will be answering all of these questions in this article.

How to Fix Amazon KFAUWI Device Showing up on Network in Windows 10

You may come across a device named Austin-Amazon KFAUWI in your list of network devices. The situation is worsened by the fact that while checking the Austin- Amazon of KFAUWI Properties, it does not provide any significant information. It only reveals the Manufacturer name (Amazon) and the Model name (KFAUWI), while all the other entries (Serial Number, Unique identifier, and the Mac & IP address) read unavailable. Because of this, you may think that your PC has been hacked.

What is Austin-Amazon of KFAUWI?

• Firstly, as obvious from the name itself, the network device is related to Amazon and its wide range of devices such as Kindle, Fire, etc., and Austin is the name of the motherboard used in these devices.
• Finally, KFAUWI is a LINUX-based PC employed by developers for device detection among other things. A quick search for the term KFAUWI also reveals that it is associated with the Amazon Fire 7 tablet vrygestel terug in 2017.

Why is Austin-Amazon of KFAUWI Listed in Network Devices?

To be honest, your guess is as good as ours. The obvious answer seems to be that:

• Your PC might have detected an Amazon Fire device connected to the same network and hence, the said listing.
• The Samsung TV Wi-Fi connection issue might be prompted by WPS or Wi-Fi Protected Setup settings of the router and Windows 10 PC.

However, if you do not own any Amazon devices or no such devices are currently connected to your Wi-Fi network, it might be best to get rid of Austin-Amazon of KFAUWI. Now, there are only two ways to remove Amazon of KFAUWI from Windows 10. The first is by disabling the Windows Connect Now service, and the second is by resetting the network. Both of these solutions are quite easy to execute as explained in the following segment.

Metode 1: Deaktiveer Windows Connect Now Service

Windows Koppel nou (WCNCSVC) service is responsible for automatically connecting your Windows 10 PC to peripheral devices such as printers, cameras, and other PCs available on the same network to allow data exchange. The service is disabled by default but the Windows update or even a rogue application may have modified the service properties.

If you indeed have an Amazon device connected to the same network, Windows will try to communicate with it. However, the connection would not be established due to compatibility issues. To disable this service and fix Amazon KFAUWI device showing up on network problem,

1. Getref Windows + R-sleutels gelyktydig oop te maak Run dialoog boks.

2. Hier, tik services.msc en klik op OK om die Dienste aansoek.

3. Klik op die Naam column header, as shown, to sort all the services alphabetically.

4. Soek die Windows Connect Now – Config Registrar diens.

5. Regskliek daarop en kies Eiendomme from the ensuing context menu, as depicted below.

6. In die algemene oortjie, klik die Opstartipe: drop-down menu and choose the handleiding opsie.

let wel: Jy kan ook kies die Gestremd is option to turn off this service.

7. Klik dan op die Stop button to terminate the service. 

8. Diensbeheer pop-up with the message Windows probeer om die volgende diens op plaaslike rekenaar te stop... will appear, as shown.

En die  Diensstatus: sal verander word na gestop in some time.

9. Klik op die Pas button to save the changes and then click OK om by die venster uit te gaan.

10. Laastens, herlaai u rekenaar. Check whether Amazon KFAUWI device is still appearing in the network list or not.

Lees ook: Herstel Ethernet het nie 'n geldige IP-konfigurasiefout nie

Method 2: Disable WPS & Reset Wi-Fi Router

The above method would have made the KFAUWI device disappear for most users, however, if your network security is indeed compromised, the device will continue to be listed. The only way to get around the issue is to reset the network router. This will revert all the settings to the default state and also kick away freeloaders from exploiting your Wi-Fi connection.

Step I: Determine IP Address

Before resetting, let us try disabling the WPS feature to fix Amazon KFAUWI device showing up on network issue. The first step is to determine router IP address through Command Prompt.

1. Druk die Windows sleutel, tik Command Prompt en klik op Begin as administrateur.

2. tipe ipconfig bevel en druk die Tik sleutel in. Here, check your Default Gateway adres.

let wel: 192.168.0.1 en 192.168.1.1 are the most common Router Default Gateway address.

Step II: Disable WPS Feature

Follow the steps listed below to disable WPS on your router:

1. Maak enige oop web browser and go to your router Default Gateway address (e.g. 192.168.1.1)

2. Tik jou Gebruikersnaam en Wagwoord en klik op die Teken aan knoppie.

let wel: Check the underside of the router for the login credentials or contact your ISP.

3. Navigeer na WPS kieslys en kies die Skakel WPS uit opsie, uitgelig getoon.

4. Now, go ahead and af die router.

5. Wait for a minute or two and then skakel dit weer aan weer.

Lees ook: Stel Wi-Fi-adapter reg wat nie werk nie in Windows 10

Step III: Reset Router

Check if the KFAUWI is device showing up on network issue has been resolved. If not, reset the router entirely.

1. Open weer die router-instellings gebruik van die default gateway IP address, Dan Login.

2. Noteer al die konfigurasie instellings. You will require them after resetting the router.

3. Druk en hou die Herstel knoppie op jou router vir 10-30 sekondes.

let wel: Jy moet aanwystoestelle soos 'n speld, or tandestokkie to press the RESET button.

4. The router will automatically skakel af en weer aan. Jy kan los die knoppie wanneer die ligte begin flikker.

5. Gaan weer in the configuration details for the router on the webpage and herlaai die router.

Make sure to set a strong password this time around to avoid Amazon KFAUWI device showing up on the network issue altogether.

Aanbeveel:

Similar to Amazon KFAUWI device showing up on network, some users have reported the sudden arrival of an Amazon KFAUWI device associated with Amazon Fire HD 8, in their networks list after updating Windows. Execute the same solutions as mentioned above to get rid of it. If you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.