Fix Computer does not start until restarted multiple times

Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.

Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.

Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.

Fix Computer does not start until restarted multiple times

Maak seker dat jy 'n herstelpunt skep, net ingeval iets verkeerd gaan.

let wel: Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.

Metode 1: Skakel vinnige opstart af

1. Druk Windows-sleutel + R, tik dan beheer en druk Enter om oop te maak Beheer paneel.

2.Klik op Hardeware en klank klik dan op Kragopsies.

3. Kies dan uit die linkervenstervenster "Kies wat die kragknoppies doen."

4. Klik nou op "Verander instellings wat tans nie beskikbaar is nie."

5. Ontmerk "Skakel vinnige opstart aan” en klik op Stoor veranderinge.

Metode 2: Begin outomatiese herstel

1.Voeg die Windows 10 selflaaibare installasie DVD in en herbegin jou rekenaar.

2.When prompted to druk enige sleutel om vanaf CD of DVD te begin, druk enige sleutel om voort te gaan.

3. Kies jou taalvoorkeure, en klik Volgende. Klik op Herstel jou rekenaar links onder.

4.Op kies 'n opsie skerm, klik Probleme met.

5.Op die Probleemoplossing-skerm, klik Gevorderde opsie.

6.Op die Gevorderde opsies skerm, klik Outomatiese herstel of opstartherstel.

7.Wag tot die Windows outomatiese/opstartherstelwerk volledige.

8. Herbegin en jy het suksesvol Fix Computer does not start until restarted multiple times issue, indien nie, gaan voort.

Lees ook Hoe om te herstel outomatiese herstel kon nie jou rekenaar herstel nie.

Metode 3: Stel BIOS terug na verstekinstellings

1.Skakel jou skootrekenaar af, skakel dit dan aan en gelyktydig druk F2, DEL of F12 (afhangende van jou vervaardiger) om aan te gaan BIOS-opstelling.

2.Nou sal jy die reset opsie moet vind na laai die verstek konfigurasie en dit kan genoem word as Herstel na verstek, Laai fabrieksverstellings, Vee BIOS-instellings uit, Laai opstelling verstek, of iets soortgelyks.

3. Kies dit met jou pyltjie sleutels, druk Enter, en bevestig die bewerking. Jou BIOS sal nou sy gebruik oorspronklike stellings.

4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.

Method 4: Check if hard disk is failing

In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.

Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.

Metode 5: Gaan kragtoevoer na

A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Method 6: Replace CMOS battery

If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.

Metode 7: ATX-terugstelling

let wel: Hierdie proses is gewoonlik van toepassing op skootrekenaars, so as jy 'n rekenaar het, verlaat dan hierdie metode.

1.Power off your laptop then remove the power cord, leave it for few minutes.

2. Nou verwyder die battery van agter af en druk en hou die kragknoppie vir 15-20 sekondes in.

let wel: Moet nog nie die kragkoord koppel nie, ons sal jou vertel wanneer om dit te doen.

3.Now plug in jou kragkabel (battery moet nie ingesit word nie) en probeer om jou skootrekenaar op te laai.

4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.

If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.

Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.

Aanbeveel:

Dit is dit wat jy suksesvol het Fix Computer does not start until restarted multiple times issue maar as jy nog enige navrae oor hierdie gids het, vra dit gerus in die kommentaarafdeling.