Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Thread Stuck In Device Driver Error in Windows 10 is a BSOD (Blue Screen Of Death) error which is caused by a driver file caught in an endless loop. The stop error code is 0x000000EA and as the error, itself suggests it’s the device driver issue rather than a hardware problem.

Anyway, the fix for the error is simple, update the drivers or BIOS and the problem is resolved in all most all the cases. If you can’t boot into Windows to perform the below-listed steps then boot your computer into safe mode using the installation media.

Depending on your PC you may receive one of the following errors:

• THREAD_STUCK_IN_DEVICE_DRIVER
• STOP Error 0xEA: THREAD_STUCK_IN_DEVICE_DRIVER
• The THREAD_STUCK_IN_DEVICE_DRIVER bug check has a value of 0x000000EA.

Few of the cause which can lead to Thread Stuck In Device Driver error are:

• Corrupt or old device drivers
• Bestuurderkonflik na installering van nuwe hardeware.
• Error 0xEA blue screen caused by a damaged video card.
• Old BIOS
• Bad Memory

Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

So without wasting any time let’s see How to Fix Thread Stuck In Device Driver Error in Windows 10 met behulp van die onderstaande probleemoplossingsgids.

Metode 1: Dateer grafiese kaartbestuurders op

If you’re facing the Thread Stuck In Device Driver Error in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face issues such as screen flickering, screen turning on/off, display not working correctly, etc you may need to update your graphics card drivers in order to fix the underlying cause. If you face any such issues then you can easily update graphics card drivers with the help of this guide.

Metode 2: Deaktiveer hardewareversnelling

1. Druk Windows-sleutel + I om oop te maak Stellings klik dan op Stelsel. 

2. From the left-hand side menu, select Wys. Now at the bottom of the Display window, click on the Advanced display settings.

3. Gaan nou na the Troubleshoot tab en klik op Verander instellings.

4. Sleep die Hardware Acceleration slider to None

5. Click Ok then Apply and restart your PC.

6. If you don’t have the troubleshoot tab then right-click on the desktop and select NVIDIA-beheerpaneel (Every graphic card has their own control panel).

7. From the NVIDIA Control Panel, select “Set PhysX configuration” from the left column.

8. Next, under select, a PhysX processor make sure the CPU is selected.

9. Click Apply to save the changes. This will disable NVIDIA PhysX GPU acceleration.

10. Herlaai jou rekenaar en kyk of jy dit kan doen fix thread stuck in device driver error in Windows 10, if not, continue.

Method 3: Run SFC and DISM tool

1. Druk Windows Sleutel + X en klik dan op Opdragprompt (Admin).

2. Tik nou die volgende in die cmd en druk enter:

Sfc / scannow

3. Wag vir die bogenoemde proses om te voltooi en sodra dit klaar is, herbegin jou rekenaar.

4. If you are able to fix Thread Stuck in device driver error in Windows 10 issue then great, if not then continue.

5. Maak weer cmd oop en tik die volgende opdrag en druk enter na elkeen:

Dism /Aanlyn /Opruim-prent /CheckHealth Dism /Aanlyn /Opruim-prent /ScanHealth Dism /Aanlyn /Opruim-prent /RestoreHealth

6. Laat die DISM-opdrag loop en wag totdat dit klaar is.

7.  If the above command doesn’t work then try on the below:

Dism /Image:C:offline /Cleanup-Image /RestoreHealth /Source:c:testmountwindows Dism /Aanlyn /Cleanup-Image /RestoreHealth /Source:c:testmountwindows /LimitAccess

let wel: Vervang die C:RepairSourceWindows met die ligging van jou herstelbron (Windows Installasie of Herstelskyf).

7. Herlaai jou rekenaar om veranderinge te stoor.

Method 4: Perform Windows update

Sometimes pending Windows update can cause a problem with the drivers, hence it’s recommended to update Windows.

1. Press Windows Sleutel + I om Instellings oop te maak, klik dan op Opdatering en sekuriteit.

2. Van die linkerkantste kant, kieslys klik op Windows Update.

3. Klik nou op die “Kyk vir opdaterings”-knoppie om te kyk vir enige beskikbare opdaterings.

4. As enige opdaterings hangende is, klik dan op Laai af en installeer opdaterings.

5. Sodra die opdaterings afgelaai is, installeer dit en jou Windows sal op datum word.

6. Nadat die opdaterings geïnstalleer is, herlaai jou rekenaar om veranderinge te stoor.

Method 5: Run Windows 10 BSOD Troubleshooter

If you are using Windows 10 Creators update or later, you can use Windows inbuilt Troubleshooter to fix Blue Screen of Death Error (BSOD).

1. Press Windows key + I to open Settings then click on ‘Opdatering en sekuriteit".

2. From the left pane, select ‘Probleme met".

3. Rollees af na 'Vind en los ander probleme op' afdelings.

4. Klik op 'Blou skerm' en klik op 'Begin die probleemoplosser".

Method 6: Give Graphics Card Access to the Application

1. Druk Windows-sleutel + I om Instellings oop te maak en klik dan op Stelsel.

2. Kies uit die linkerkantste kieslys Wys klik dan op Graphics settings link op die bodem.

3. Select the type of app, if you can’t find your app or game in the list then select the Klassieke toepassing and then use the “Kyk na" opsie.

4. Navigate to your application or game, kies dit en klik Oop.

5. Once the app is added to the list, click on it then again click on Opsies.

6. Kies “High performance” and click on Save.

7. Herlaai jou rekenaar om veranderinge te stoor.

Method 7: Update BIOS (Basic Input/Output System)

BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10. Sometimes, the older BIOS doesn’t support new features and that is why you can face the Thread Stuck in device driver error. In order to fix resolve the underlying issue, you need to update BIOS using this guide.

Method 8: Reset Overclocking Settings

If you’re overclocking your PC then this might explains why you’re facing the Thread Stuck in device driver error, as this overclocking software puts a strain on your PC hardware which is why PC restarts unexpectedly giving the BSOD error. To fix this issue simply reset the overclocking settings or remove any overclocking software.

Method 9: Faulty GPU

Chances are the GPU installed on your system might be faulty, so one way to check this is to remove the dedicated graphic card and leave the system with only integrated one and see if the issue is resolved or not. If the issue is resolved then your GPU is faulty and you need to replace it with a new one but before that, you could try cleaning your graphic card and again place it in the motherboard to see it’s working or not.

Metode 10: Gaan kragtoevoer na

A faulty or failing Power Supply is generally the cause for the Bluescreen of death errors. Because the power consumption of hard disk is not met, it won’t get enough power to run, and subsequently, you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

If you have recently installed new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporarily remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Dit is dit wat jy suksesvol het Fix Thread Stuck In Device Driver Error in Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.