Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Thread Stuck In Device Driver Error in Windows 10 is a BSOD (Blue Screen Of Death) error which is caused by a driver file caught in an endless loop. The stop error code is 0x000000EA and as the error, itself suggests it’s the device driver issue rather than a hardware problem.

Anyway, the fix for the error is simple, update the drivers or BIOS and the problem is resolved in all most all the cases. If you can’t boot into Windows to perform the below-listed steps then boot your computer into safe mode using the installation media.

Depending on your PC you may receive one of the following errors:

• THREAD_STUCK_IN_DEVICE_DRIVER
• STOP Error 0xEA: THREAD_STUCK_IN_DEVICE_DRIVER
• The THREAD_STUCK_IN_DEVICE_DRIVER bug check has a value of 0x000000EA.

Few of the cause which can lead to Thread Stuck In Device Driver error are:

• Corrupt or old device drivers
• تعارض برنامج التشغيل بعد تثبيت جهاز جديد.
• Error 0xEA blue screen caused by a damaged video card.
• Old BIOS
• ذاكرة سيئة

Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

لذلك، دون إضاعة أي وقت، دعونا نرى كيفية القيام بذلك Fix Thread Stuck In Device Driver Error in Windows 10 بمساعدة دليل استكشاف الأخطاء وإصلاحها المدرج أدناه.

الطريقة 1: تحديث برامج تشغيل بطاقة الرسوميات

If you’re facing the Thread Stuck In Device Driver Error in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face issues such as screen flickering, screen turning on/off, display not working correctly, etc you may need to update your graphics card drivers in order to fix the underlying cause. If you face any such issues then you can easily update graphics card drivers with the help of this guide.

الطريقة الثالثة: تعطيل تسريع الأجهزة

1. اضغط على مفتاح Windows + I لفتحه الإعدادات ثم انقر فوق النظام. 

2. From the left-hand side menu, select العرض. Now at the bottom of the Display window, click on the Advanced display settings.

3. اذهب الآن إلى the Troubleshoot tab ثم انقر تغيير الاعدادات.

4. اسحب Hardware Acceleration slider لا شيء

5. Click Ok then Apply and restart your PC.

6. If you don’t have the troubleshoot tab then right-click on the desktop and select نفيديا لوحة التحكم (Every graphic card has their own control panel).

7. From the NVIDIA Control Panel, select “Set PhysX configuration” from the left column.

8. Next, under select, a PhysX processor make sure the CPU is selected.

9. Click Apply to save the changes. This will disable NVIDIA PhysX GPU acceleration.

10. أعد تشغيل جهاز الكمبيوتر الخاص بك ومعرفة ما إذا كنت قادرًا على ذلك fix thread stuck in device driver error in Windows 10, if not, continue.

Method 3: Run SFC and DISM tool

1. اضغط على مفتاح Windows + X ثم انقر فوق موجه الأوامر (المسؤول).

2. الآن اكتب ما يلي في cmd واضغط على Enter:

SFC / SCANNOW

3. انتظر حتى تنتهي العملية المذكورة أعلاه، وبمجرد الانتهاء من ذلك، قم بإعادة تشغيل جهاز الكمبيوتر الخاص بك.

4. If you are able to fix Thread Stuck in device driver error in Windows 10 issue then great, if not then continue.

5. افتح cmd مرة أخرى واكتب الأمر التالي ثم اضغط على زر الإدخال بعد كل أمر:

التخلص / عبر الإنترنت / تنظيف الصورة / CheckHealth Dism / عبر الإنترنت / Cleanup-Image / ScanHealth Dism / Online / Cleanup-Image / RestoreHealth

6. دع الأمر DISM يعمل وانتظر حتى ينتهي.

7.  If the above command doesn’t work then try on the below:

Dism / Image: C: Offline / Cleanup-Image / RestoreHealth / المصدر: c: testmountwindows Dism / Online / Cleanup-Image / RestoreHealth / المصدر: c: testmountwindows / LimitAccess

ملحوظة: استبدل C:RepairSourceWindows بموقع مصدر الإصلاح الخاص بك (قرص تثبيت Windows أو قرص الاسترداد).

7. أعد تشغيل الكمبيوتر لحفظ التغييرات.

Method 4: Perform Windows update

Sometimes pending Windows update can cause a problem with the drivers, hence it’s recommended to update Windows.

1. صحافة مفتاح Windows + أقوم بفتح الإعدادات ثم النقر فوق التحديث والأمان.

2. من الجانب الأيسر، انقر على القائمة تحديث ويندوز.

3. الآن انقر فوق "التحقق من وجود تحديثات"للتحقق من وجود أي تحديثات متوفرة.

4. إذا كانت هناك أية تحديثات معلقة، فانقر فوق قم بتنزيل وتثبيت التحديثات.

5. بمجرد تنزيل التحديثات، قم بتثبيتها وسيصبح Windows الخاص بك محدثًا.

6. بعد تثبيت التحديثات، أعد تشغيل جهاز الكمبيوتر الخاص بك لحفظ التغييرات.

Method 5: Run Windows 10 BSOD Troubleshooter

If you are using Windows 10 Creators update or later, you can use Windows inbuilt Troubleshooter to fix Blue Screen of Death Error (BSOD).

1. Press Windows key + I to open Settings then click on ‘التحديث والأمان'.

2. From the left pane, select ‘استكشاف'.

3. قم بالتمرير لأسفل إلى "البحث عن المشاكل الأخرى وإصلاحها"أقسام.

4. انقر فوق "شاشة زرقاء"وانقر فوق"قم بتشغيل مستكشف الأخطاء ومصلحها'.

Method 6: Give Graphics Card Access to the Application

1. اضغط على مفتاح Windows + I لفتح الإعدادات ثم انقر فوق النظام.

2. من القائمة اليسرى، حدد العرض ثم انقر فوق Graphics settings link في الجزء السفلي.

3. Select the type of app, if you can’t find your app or game in the list then select the التطبيق الكلاسيكي and then use the “تصفح" اختيار.

4. Navigate to your application or game، حدده وانقر فتح.

5. Once the app is added to the list, click on it then again click on خيارات.

6. تحديد "عالية الأداء” and click on Save.

7. أعد تشغيل الكمبيوتر لحفظ التغييرات.

Method 7: Update BIOS (Basic Input/Output System)

BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10. Sometimes, the older BIOS doesn’t support new features and that is why you can face the Thread Stuck in device driver error. In order to fix resolve the underlying issue, you need to update BIOS using this guide.

Method 8: Reset Overclocking Settings

If you’re overclocking your PC then this might explains why you’re facing the Thread Stuck in device driver error, as this overclocking software puts a strain on your PC hardware which is why PC restarts unexpectedly giving the BSOD error. To fix this issue simply reset the overclocking settings or remove any overclocking software.

Method 9: Faulty GPU

Chances are the GPU installed on your system might be faulty, so one way to check this is to remove the dedicated graphic card and leave the system with only integrated one and see if the issue is resolved or not. If the issue is resolved then your وحدة معالجة الرسوميات‏:‏ is faulty and you need to replace it with a new one but before that, you could try cleaning your graphic card and again place it in the motherboard to see it’s working or not.

الطريقة التاسعة: التحقق من مصدر الطاقة

A faulty or failing Power Supply is generally the cause for the Bluescreen of death errors. Because the power consumption of hard disk is not met, it won’t get enough power to run, and subsequently, you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

If you have recently installed new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporarily remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

هذا كل ما لديك بنجاح Fix Thread Stuck In Device Driver Error in Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.