Fix Windows 10 install Fails With Error C1900101-4000D
Fix Windows 10 install Fails With Error C1900101-4000D: If you’re trying to upgrade to Windows 10 but the install fails with error code C1900101-4000D then don’t worry as it occurs because the Windows installer cannot access important files required for installation. Sometimes this error is also caused because of a conflict during installation but you can’t be sure as there is no error message accompanying this error.
0xC1900101-0x4000D
The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation
While there is no definite fix for this issue but users seem to be recommending a clean installation of Windows 10 which should only be used as a last resort. So without wasting any time let’s see How to Fix Windows 10 install Fails With Error C1900101-4000D with the help of below-listed troubleshooting guide.
Fix Windows 10 install Fails With Error C1900101-4000D
পূর্বশর্ত
a)Make sure to Update all drivers, including graphic, sound, BIOS, USB devices, printers, etc before the installing Windows 10.
b)Remove all external USB devices such as pen drive, external hard disk, USB keyboard & mouse, USB printer and all peripherals.
c)Use an ethernet cable instead of WiFi and disable WiFi until the update is complete.
Method 1: Temporarily Disable Antivirus and Firewall before attempting Upgrade
1.এর উপর রাইট ক্লিক করুন অ্যান্টিভাইরাস প্রোগ্রাম আইকন সিস্টেম ট্রে থেকে এবং নির্বাচন করুন অক্ষম করুন।
2. পরবর্তী, সময় ফ্রেম নির্বাচন করুন যার জন্য অ্যান্টিভাইরাস নিষ্ক্রিয় থাকবে।
বিঃদ্রঃ: 15 মিনিট বা 30 মিনিটের জন্য সম্ভাব্য সর্বনিম্ন সময় বেছে নিন।
3.Once done, again try to upgrade your PC and check if the error resolves or not.
4.Type control in the Windows Search then click on কন্ট্রোল প্যানেল অনুসন্ধান ফলাফল থেকে।
5. পরবর্তী, ক্লিক করুন সিস্টেম এবং সুরক্ষা।
6. তারপর ক্লিক করুন উইন্ডোজ ফায়ারওয়াল.
7.এখন বাম উইন্ডো ফলক থেকে ক্লিক করুন উইন্ডোজ ফায়ারওয়াল চালু বা বন্ধ করুন।
8.উইন্ডোজ ফায়ারওয়াল বন্ধ করুন এবং আপনার পিসি পুনরায় চালু করুন নির্বাচন করুন। Again try to upgrade your PC and see if you’re able to Fix Windows 10 install Fails With Error C1900101-4000D.
যদি উপরের পদ্ধতিটি কাজ না করে তবে আপনার ফায়ারওয়াল আবার চালু করতে ঠিক একই পদক্ষেপগুলি অনুসরণ করতে ভুলবেন না।
Method 2: Remove any hyphens from your computer or machine name
1. Windows Key + R টিপুন তারপর টাইপ করুন sysdm.cpl এবং খোলার জন্য এন্টার টিপুন পদ্ধতির বৈশিষ্ট্য.
2.Make sure you’re under কম্পিউটারের নাম ট্যাব তারপরে ক্লিক করুন পরিবর্তন নীচে বোতাম।
3.Make sure your machine name is simple no periods or hyphens or dashes.
4.Click OK then Apply followed by OK.
5. পরিবর্তনগুলি সংরক্ষণ করতে আপনার পিসি রিবুট করুন।
পদ্ধতি 3: নিশ্চিত করুন যে উইন্ডোজ আপ টু ডেট
1. উইন্ডোজ কী + I টিপুন তারপর নির্বাচন করুন আপডেট এবং সুরক্ষা।
2. পরবর্তী, আবার ক্লিক করুন হালনাগাদ এর জন্য অনুসন্ধান করুন এবং কোনো মুলতুবি আপডেট ইনস্টল করতে ভুলবেন না।
3. আপডেটগুলি ইনস্টল হওয়ার পরে আপনার পিসি রিবুট করুন এবং দেখুন আপনি সক্ষম কিনা Fix Windows 10 install Fails With Error C1900101-4000D.
পদ্ধতি 4: একটি ক্লিন বুট সম্পাদন করুন
This would make sure that if any 3rd party application is conflicting with Windows update then you will be able to successfully install Windows Updates inside Clean Boot. Sometimes 3rd party software can conflict with Windows Update and therefore cause Windows Update to be Stuck. In order, Fix Windows 10 install Fails With Error C1900101-4000D, আপনাকে আপনার পিসিতে একটি ক্লিন বুট করতে হবে এবং ধাপে ধাপে সমস্যাটি নির্ণয় করতে হবে।
পদ্ধতি 5: উইন্ডোজ 10 মিডিয়া ক্রিয়েশন টুল ব্যবহার করে আপগ্রেড করুন
1.Download Media Creation Tool here.
2.Backup your data from system partition and save your license key.
3.Start the tool and choose to Upgrade this PC now.
4.Accept the license terms.
5.After the installer is ready, choose to ব্যক্তিগত ফাইল এবং অ্যাপস রাখুন।
6.The PC will restart few times and your PC would be successfully upgraded.
পদ্ধতি 6: SFC এবং DISM চালান
1. Windows Key + X টিপুন তারপরে ক্লিক করুন কমান্ড প্রম্পট (অ্যাডমিন)।
2.এখন cmd-এ নিম্নলিখিতটি টাইপ করুন এবং এন্টার টিপুন:
Sfc /scannow sfc /scannow /offbootdir=c: /offwindir=c:windows (উপরে ব্যর্থ হলে এটি চেষ্টা করুন)
3. উপরের প্রক্রিয়াটি শেষ হওয়ার জন্য অপেক্ষা করুন এবং একবার আপনার পিসি পুনরায় চালু করুন।
4. আবার cmd খুলুন এবং নিম্নলিখিত কমান্ডটি টাইপ করুন এবং প্রতিটির পরে এন্টার টিপুন:
ক) ডিসম/অনলাইন/ক্লিনআপ-ইমেজ/চেকহেলথ খ) ডিসম/অনলাইন/ক্লিনআপ-ইমেজ/স্ক্যানহেলথ গ) ডিসম/অনলাইন/ক্লিনআপ-ইমেজ/রিস্টোর হেলথ
DISM কমান্ডটি চলতে দিন এবং এটি শেষ হওয়ার জন্য অপেক্ষা করুন।
6. যদি উপরের কমান্ডটি কাজ না করে তবে নীচেরটি চেষ্টা করুন:
Dism/Image:C:offline/Cleanup-Image/RestoreHealth/Source:c:testmountwindows Dism/Online/Cleanup-Image/RestoreHealth/Source:c:testmountwindows/LimitAccess
বিঃদ্রঃ: C:RepairSourceWindows কে আপনার মেরামতের উৎসের অবস্থানের সাথে প্রতিস্থাপন করুন (উইন্ডোজ ইনস্টলেশন বা রিকভারি ডিস্ক)।
7. পরিবর্তনগুলি সংরক্ষণ করতে আপনার পিসি রিবুট করুন এবং আপনি সক্ষম কিনা তা দেখুন৷ Fix Windows 10 install Fails With Error C1900101-4000D.
Method 7: Reset Windows Updates Components
1. Windows Key + X টিপুন তারপর নির্বাচন করুন কমান্ড প্রম্পট (অ্যাডমিন)।
2.এখন উইন্ডোজ আপডেট পরিষেবাগুলি বন্ধ করতে নিম্নলিখিত কমান্ডগুলি টাইপ করুন এবং তারপরে প্রতিটির পরে এন্টার টিপুন:
নেট স্টপ wuauserv
নেট স্টপ CryptSvc
নেট স্টপ বিট
নেট স্টপ msiserver
3. পরবর্তী, সফ্টওয়্যার ডিস্ট্রিবিউশন ফোল্ডারের নাম পরিবর্তন করতে নিম্নলিখিত কমান্ডটি টাইপ করুন এবং তারপরে এন্টার টিপুন:
রে সি: উইন্ডোজ সফ্টওয়্যার ডিস্ট্রিবিউশন সফটওয়্যার ডিস্ট্রিবিউশন.অল
রে সি: উইন্ডোজ সিস্টেমটিএমএনএক্সএক্সট্রোটক্সএক্সএনএক্স ক্যাট্রোটএক্সএক্সএক্স.অল
4. অবশেষে, উইন্ডোজ আপডেট পরিষেবাগুলি শুরু করতে নিম্নলিখিত কমান্ডটি টাইপ করুন এবং প্রতিটির পরে এন্টার টিপুন:
নেট চালু করুন
নেট শুরু CryptSvc
নেট শুরু বিট
নেট শুরু msiserver
5. পরিবর্তনগুলি সংরক্ষণ করতে আপনার পিসি রিবুট করুন এবং আপনি সক্ষম কিনা তা পরীক্ষা করুন৷ Fix Windows 10 install Fails With Error C1900101-4000D.
Method 8: Delete Registry for Mounted Images
1. Windows Key + R টিপুন তারপর টাইপ করুন regedit এবং রেজিস্ট্রি এডিটর খুলতে এন্টার চাপুন।
2. নিম্নলিখিত রেজিস্ট্রি কীতে নেভিগেট করুন:
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWIMMountMounted Images
3.Select Mounted Images then in the right window pane right-click on (Default) and select Delete.
4.Exit Registry Editor and reboot your PC to save changes.
Method 9: Disable Wi-Fi Adapter and CD/DVD Drive
1. Windows Key + R টিপুন তারপর টাইপ করুন devmgmt.msc এবং ডিভাইস ম্যানেজার খুলতে এন্টার টিপুন।
2.Expand DVD/CD-ROM drives, তারপর আপনার উপর ডান ক্লিক করুন সিডি/ডিভিডি ড্রাইভ এবং নির্বাচন করুন ডিভাইস অক্ষম করুন।
3.Similarly, expand Network adapters then right-click on your WiFi অ্যাডাপ্টার এবং নির্বাচন করুন ডিভাইস অক্ষম করুন।
4.Again try to run Windows 10 setup and see if you’re able to Fix Windows 10 install Fails With Error C1900101-4000D.
Method 10: Run Malwarebytes and AdwCleaner
Malwarebytes is a powerful on-demand scanner which should remove browser hijackers, adware and other types of malware from your PC. It is important to note that Malwarebytes will run alongside antivirus software without conflicts. To install and run Malwarebytes Anti-Malware, go to this article and follow each and every step.
1.Download AdwCleaner from this link.
2.Once the download is complete, double-click on the adwcleaner.exe file প্রোগ্রাম চালানোর জন্য।
3. "এ ক্লিক করুনআমি একমত"বোতাম accept the license agreement.
4.On the next screen, click the স্ক্যান বোতাম under Actions.
5.Now, wait for the AdwCleaner to search for PUPs and other malicious programs.
6.Once the scan is complete, click পরিষ্কার in order to clean your system of such files.
7.Save any work you might be doing as your PC will need to reboot, click OK to reboot your PC.
8.Once the computer reboots, a log file will open which will list all of the files, folders, registry keys, etc that were removed in the previous step.
প্রস্তাবিত:
এটা আপনি সফলভাবে আছে Fix Windows 10 install Fails With Error C1900101-4000D কিন্তু যদি আপনার এখনও এই নির্দেশিকা সংক্রান্ত কোন প্রশ্ন থাকে তাহলে মন্তব্য বিভাগে নির্দ্বিধায় জিজ্ঞাসা করুন।