Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Thread Stuck In Device Driver Error in Windows 10 is a BSOD (Blue Screen Of Death) error which is caused by a driver file caught in an endless loop. The stop error code is 0x000000EA and as the error, itself suggests it’s the device driver issue rather than a hardware problem.

Anyway, the fix for the error is simple, update the drivers or BIOS and the problem is resolved in all most all the cases. If you can’t boot into Windows to perform the below-listed steps then boot your computer into safe mode using the installation media.

Depending on your PC you may receive one of the following errors:

• THREAD_STUCK_IN_DEVICE_DRIVER
• STOP Error 0xEA: THREAD_STUCK_IN_DEVICE_DRIVER
• The THREAD_STUCK_IN_DEVICE_DRIVER bug check has a value of 0x000000EA.

Few of the cause which can lead to Thread Stuck In Device Driver error are:

• Corrupt or old device drivers
• Sukob upravljačkog programa nakon instaliranja novog hardvera.
• Error 0xEA blue screen caused by a damaged video card.
• Old BIOS
• Bad Memory

Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

So without wasting any time let’s see How to Fix Thread Stuck In Device Driver Error in Windows 10 uz pomoć dolje navedenog vodiča za rješavanje problema.

Metoda 1: Ažurirajte upravljačke programe grafičke kartice

If you’re facing the Thread Stuck In Device Driver Error in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face issues such as screen flickering, screen turning on/off, display not working correctly, etc you may need to update your graphics card drivers in order to fix the underlying cause. If you face any such issues then you can easily update graphics card drivers with the help of this guide.

Metoda 2: Onemogućite hardversko ubrzanje

1. Pritisnite tipku Windows + I da otvorite Postavke zatim kliknite na Sistem. 

2. From the left-hand side menu, select prikaz. Now at the bottom of the Display window, click on the Advanced display settings.

3. Sada idite na the Troubleshoot tab i kliknite Promenite postavke.

4. Prevucite Hardware Acceleration slider do None

5. Click Ok then Apply and restart your PC.

6. If you don’t have the troubleshoot tab then right-click on the desktop and select NVIDIA kontrolna tabla (Every graphic card has their own control panel).

7. From the NVIDIA Control Panel, select “Set PhysX configuration” from the left column.

8. Next, under select, a PhysX processor make sure the CPU is selected.

9. Click Apply to save the changes. This will disable NVIDIA PhysX GPU acceleration.

10. Ponovo pokrenite računar i vidite da li možete fix thread stuck in device driver error in Windows 10, if not, continue.

Method 3: Run SFC and DISM tool

1. Pritisnite tipku Windows + X, a zatim kliknite na Komandni redak (Admin).

2. Sada upišite sljedeće u cmd i pritisnite enter:

Sfc / scannow

3. Sačekajte da se gornji proces završi i kada završite ponovo pokrenite računar.

4. If you are able to fix Thread Stuck in device driver error in Windows 10 issue then great, if not then continue.

5. Ponovo otvorite cmd i upišite sljedeću naredbu i pritisnite enter nakon svake:

Dism /Online /Cleanup-Image /CheckHealth Dism /Online /Cleanup-Image /ScanHealth Dism /Online /Cleanup-Image /RestoreHealth

6. Pustite DISM naredbu da se pokrene i pričekajte da se završi.

7.  If the above command doesn’t work then try on the below:

Dism /Image:C:offline /Cleanup-Image /RestoreHealth /Izvor:c:testmountwindows Dism /Online /Cleanup-Image /RestoreHealth /Izvor:c:testmountwindows /LimitAccess

Bilješka: Zamijenite C:RepairSourceWindows lokacijom vašeg izvora popravke (Windows instalacijski disk ili disk za oporavak).

7. Ponovo pokrenite računar da biste sačuvali promene.

Method 4: Perform Windows update

Sometimes pending Windows update can cause a problem with the drivers, hence it’s recommended to update Windows.

1. Pritisnite Windows taster + I da otvorite Postavke, a zatim kliknite na Ažuriranje i sigurnost.

2. From the left-hand side, menu click on Windows Update.

3. Sada kliknite na “Proverite ažuriranja” dugme da provjerite ima li dostupnih ažuriranja.

4. If any updates are pending then click on Preuzmite i instalirajte ažuriranja.

5. Once the updates are downloaded, install them and your Windows will become up-to-date.

6. After the updates are installed reboot your PC to save changes.

Method 5: Run Windows 10 BSOD Troubleshooter

If you are using Windows 10 Creators update or later, you can use Windows inbuilt Troubleshooter to fix Blue Screen of Death Error (BSOD).

1. Press Windows key + I to open Settings then click on ‘Ažuriranje i sigurnost'.

2. From the left pane, select ‘Rješavanje problema'.

3. Pomaknite se dolje do 'Pronađite i popravite druge probleme' sekcije.

4. Kliknite na 'Plavi ekran' i kliknite na 'Pokrenite program za rešavanje problema'.

Method 6: Give Graphics Card Access to the Application

1. Pritisnite tipku Windows + I da otvorite Postavke, a zatim kliknite na Sistem.

2. Iz lijevog izbornika odaberite prikaz zatim kliknite na Graphics settings link na dnu.

3. Select the type of app, if you can’t find your app or game in the list then select the Klasična aplikacija and then use the “Pregled" opcija.

4. Navigate to your application or game, odaberite ga i kliknite Otvori.

5. Once the app is added to the list, click on it then again click on Opcije.

6. Odaberite „Visoke performanse” and click on Save.

7. Ponovo pokrenite računar da biste sačuvali promene.

Method 7: Update BIOS (Basic Input/Output System)

BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10. Sometimes, the older BIOS doesn’t support new features and that is why you can face the Thread Stuck in device driver error. In order to fix resolve the underlying issue, you need to update BIOS using this guide.

Method 8: Reset Overclocking Settings

If you’re overclocking your PC then this might explains why you’re facing the Thread Stuck in device driver error, as this overclocking software puts a strain on your PC hardware which is why PC restarts unexpectedly giving the BSOD error. To fix this issue simply reset the overclocking settings or remove any overclocking software.

Method 9: Faulty GPU

Chances are the GPU installed on your system might be faulty, so one way to check this is to remove the dedicated graphic card and leave the system with only integrated one and see if the issue is resolved or not. If the issue is resolved then your GPU is faulty and you need to replace it with a new one but before that, you could try cleaning your graphic card and again place it in the motherboard to see it’s working or not.

Metoda 10: Provjerite napajanje

A faulty or failing Power Supply is generally the cause for the Bluescreen of death errors. Because the power consumption of hard disk is not met, it won’t get enough power to run, and subsequently, you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

If you have recently installed new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporarily remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

To je to što ste uspjeli Fix Thread Stuck In Device Driver Error in Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.