When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Karaan nga Operating System.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe icon.
2. If the status is set to Dili konektado, i-klik ang Network globe icon, choose your Wi-Fi network and click on Sumpaysumpaya button. Make sure Mode sa eroplano wala giablihan.
3. If you again face the same network connection error code, then click on the Pagdili button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Pag-klik sa tuo sa Icon sa Wi-Fi Ug pagpili Open Network & Internet settings.
6. I-klik ang Wi-Fi.
7. Scroll down the right menu, click on Pagdumala sa nailhan nga mga network.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Kalimtan
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Pamaagi 2: I-restart ang Router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Mubo nga sulat: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Pangitaa ang Butang sa gahum at the back of your router.
2. Press the button once to patya kini.
3. Karon, paghunong sa imong Router power cable ug maghulat hangtud nga ang gahum hingpit nga mahurot gikan sa mga capacitor.
4. Unya, pag-reconnect ang gahum kable ug i-on kini human sa usa ka minuto.
5. Wait until the network connection is re-established and try signing in again.
Basaha usab: Pag-ayo sa mga Kompyuter nga Wala Nagpakita sa Network sa Windows 10
Paagi 3: Pagdagan ang Troubleshooter sa Network
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Hit sa Windows key ug pag-type Mga setting sa pagsulbad sa search bar ug Bukas.
2. I-klik ang Dugang nga mga kagubot.
3. Pagpili Network Adapter ug i-klik sa Pagdalagan ang troubleshooter.
4. Select the network adapter to diagnose ug i-klik sa sunod.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, i-klik Tapuson ang sulud.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Basaha usab: Ayuhon ang Pagpakigbahin sa Pamilya YouTube TV Dili Mogana
Pamaagi 4: Pag-ayo sa mga File sa Sistema
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (System File Checker) /DISM (Pag-deploy sa Pag-alagad ug Pagdumala sa Imahe) utilities on your Windows 10 PC.
1. Hit sa Windows key, matang Gisugo sa Command ug i-klik sa Pagdalagan ingon administrador.
2. I-klik ang Oo sa Pagkontrol sa Account Account aghat.
3. Matang chkdsk C: / f / r / x sugo ug hit Pagsulod key.
4. Kung giaghat ka sa usa ka mensahe, Ang Chkdsk dili makadagan…ang volume kay… sa proseso sa paggamit, unya, type Y ug pag-igo sa Pagsulod key.
5. Pag-usab, i-type ang sugo: sfc / scannow ug sa press Pagsulod key sa pagpadagan sa System File Checker pagsusi.
Mubo nga sulat: Ang usa ka pag-scan sa sistema pagasugdan ug kini molungtad og pipila ka minuto aron mahuman. Samtang, mahimo nimong ipadayon ang paghimo sa ubang mga kalihokan apan hinumdomi nga dili aksidente nga gisira ang bintana.
Human makompleto ang pag-scan, kini magpakita sa bisan hain niini nga mga mensahe:
- Ang Windows Resource Protection wala makakaplag bisan unsang mga kalapasan sa integridad.
- Ang Windows Resource Protection dili makahimo sa gihangyo nga operasyon.
- Ang Windows Resource Protection nakit-an ang mga dunot nga mga file ug malampuson nga giayo kini.
- Ang Windows Resource Protection nakit-an nga mga dunot nga mga file apan wala makaayo sa pipila niini.
6. Kung nahuman na ang pag-scan, Pagsugod pag-usab imong PC.
7. Pag-usab, ilunsad Command Prompt isip administrator ug ipatuman ang gihatag nga mga mando sa usag usa:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Mubo nga sulat: Kinahanglan nga adunay ka nagtrabaho nga koneksyon sa internet aron mapatuman ang mga sugo sa DISM sa hustong paagi.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Hit sa Windows key ug pag-type Device Manager in the Windows search menu. Click on Open.
2. Palapad ang Mga adaptor sa network seksyon pinaagi sa pag-double click niini.
3. Pag-right-click sa imong Driver sa network (pananglitan, Intel (R) Dual Band Wireless-AC 3168) ug pilia ang Paglikay sa device kapilian.
4. Confirm the below prompt by clicking on Oo.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Pag-andam sa device kapilian.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Basaha usab: Ang pag-ayo sa Windows dili awtomatik nga makamatikod sa mga setting sa Proxy sa Network
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Adto sa search menu ug type CMD. I-klik ang Pagdalagan ingon administrador.
2. I-type ang mosunod mga sugo ug pag-igo sa Pagsulod key.
netsh winsock reset netsh int ip reset ipconfig / pagpagawas ipconfig / renew
3. Paghulat sa mga sugo nga ipatuman ug i-reboot ang imong PC.
Pamaagi 7: Pag-flush sa DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Paglusad Gisugo sa Command by searching in the Windows menu and click on Run as administrator.
2. Matang ipconfig / flushd in the command window and hit Pagsulod.
Basaha usab: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Ilunsad ang run dialog box pinaagi sa pagpindot Mga yawe sa Windows + R sa tingub.
2. Matang ncpa.cpl ug naigo Pagsulod key.
3. Right-click on your active adapter sa network ug i-klik sa Properties.
4. I-uncheck ang Bersyon sa Internet Protocol 6 (TCP / IPv6) kapilian.
5. Sa katapusan, i-klik sa OK to save the changes and check if the issue is resolved.
Mubo nga sulat: If you use multiple network connections, navigate to Network ug Sharing Center ug Pag-usab adapter settings. Right-click on the adapter and select naghimo og kakulangan. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Matang Device Manager in the Windows search menu and click Open.
2. Doble nga pag-klik sa Mga adaptor sa network aron mapalapad kini.
3. Pag-right-click sa imong drayber (pananglitan Intel(R) Dual Band Wireless-AC 3168) ug i-klik Pag-update sa drayber.
4. I-klik ang Pag-browse sa akong computer alang sa mga driver to locate and install a driver manually.
5. I-klik ang browser button to choose any directory and click on sunod.
5A. The drivers will be updated to the latest version if they are not updated.
5B. Kung naa na sila sa bag-ong yugto, ang screen magpakita sa mosunod nga mensahe, Ang labing kaayo nga mga drayber alang sa imong aparato na-install na.
6. I-klik ang Close aron makagawas sa bintana.
7. Pag-restart the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Paglusad Device Manager from the Windows search menu.
2. Pag-klik sa tuo sa drayber Ug pagpili Uninstall device.
3. A warning prompt will be displayed on the screen. Check the box “Kuhaa ang driver software alang niini nga device” and confirm the prompt by clicking Pag-uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Bisitaha ang website sa naghimo.
2. Pangitaa ang ug Download ang mga drayber nga katumbas sa bersyon sa Windows sa imong PC.
3. Once downloaded, double click on the na-download nga file ug sunda ang gihatag nga mga panudlo aron ma-install kini.
Basaha usab: Giunsa ang pag-set up sa usa ka VPN sa Windows 10
Pamaagi 10: Pag-update sa Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Ipadayon ang Windows + ko mga yawe dungan sa pagbukas setting sa imong computer.
2. Pagpili Pagbag-o ug Kaluwasan.
3. Pagpili Susiha ang mga Update.
4A. Click Pag-instalar karon to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Nagbag-o ka mensahe.
Pamaagi 11: I-uninstall ang Bag-ong mga Update
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Pagpadayon ug pagpadayon Mga yawe sa Windows + R dungan sa pagbukas sa run dialog box.
2. Matang appwiz.cpl ug naigo Pagsulod.
3. I-klik ang Tan-awa ang mga gipa-update.
4. Select the most recent update and click on Pag-uninstall.
5. Confirm the prompt, if any, and i-reboot ang PC.
Basaha usab: Giunsa Pag-ayo ang Firefox nga Dili Nag-load sa Mga Panid
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Mubo nga sulat: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to setting unya System ug Mga. Once you have reset your network, you have to reinstall all networking software sama sa Mga kliyente sa VPN or Mga virtual nga switch.
1. Pagpadayon ug pagpadayon Mga yawe sa Windows + I dungan sa pagbukas Mga Setting sa Windows.
2. I-klik ang Network ug Internet.
3. I-klik ang Reset sa network sa ilalum sa Kahimtang.
4. Kumpirma ang prompt pinaagi sa pag-klik sa I-reset ang karon.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
girekomendar:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.