• Kodu /
  • aknad /
Veebruar 6, 2018

Fix Computer does not start until restarted multiple times

Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.

Fix Computer does not start until restarted multiple times

Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.

Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.

Fix Computer does not start until restarted multiple times

Looge kindlasti taastepunkt, juhuks kui midagi läheb valesti.

Märge: Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.

1. meetod: lülitage kiirkäivitus välja

1.Press Windows Key + R then type control and hit Enter to open Kontrollpaneel.

juhtpaneel

2.Vajuta Riistvara ja heli siis klõpsake nuppu Power Options.

toitevalikud juhtpaneelil

3. Seejärel valige vasakpoolsest aknapaanist "Valige, mida toitenupud teevad."

valige, mida usb ei tuvasta toitenupud

4. Nüüd klõpsake "Muuda seadeid, mis pole praegu saadaval."

muutke seadeid, mis pole praegu saadaval

5.Uncheck “Lülitage sisse kiire käivitamine” ja klõpsake nuppu Salvesta muudatused.

Tühjendage ruut Lülita sisse kiire käivitamine

2. meetod: käivitage automaatne parandamine

1.Sisestage Windows 10 käivitatav installi-DVD ja taaskäivitage oma arvuti.

2.When prompted to vajuta suvalist klahvi CD-lt või DVD-lt käivitamiseks vajutage jätkamiseks suvalist klahvi.

CD või DVD käivitamiseks vajutage suvalist nuppu

3. Valige oma keele-eelistused ja klõpsake nuppu Edasi. Klõpsake nuppu Remont teie arvuti vasakus allnurgas.

Remont arvuti

4. Valikukuval klõpsake nuppu Tõrkeotsing.

Valige Windows 10 automaatse käivitusparanduse suvand

5. Tõrkeotsingu ekraanil klõpsake nuppu Täpsem valik.

valige tõrkeotsingu ekraanilt täpsem valik

6. Klõpsake kuval Täpsemad suvandid ikooni Automaatne remont või käivitusremont.

käivitage automaatne remont

7. Oodake, kuni Windowsi automaatne/käivitusparandus täielik.

8. Taaskäivitage ja olete edukalt Fix Computer does not start until restarted multiple times issue, kui ei, siis jätka.

Loe ka Automaatne parandamine ei suutnud teie arvutit parandada.

3. meetod: lähtestage BIOS vaikeseadetele

1. Lülitage sülearvuti välja, seejärel sisse ja korraga vajutage F2, DEL või F12 (olenevalt teie tootjast) sõlmida BIOS-i seadistamine.

vajutage BIOS-i seadistusse sisenemiseks klahvi DEL või F2

2.Now you’ll need to find the reset option to laadige vaikekonfiguratsioon ja selle nimeks võib olla Reset to default, Laadi tehase vaikesätted, Tühjenda BIOS sätted, Laadi häälestuse vaikeseaded või midagi sarnast.

laadige BIOS-i vaikekonfiguratsioon

3.Select it with your arrow keys, press Enter, and confirm the operation. Your BIOS hakkab nüüd seda kasutama vaikeseaded.

4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.

Method 4: Check if hard disk is failing

In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.

Kontrollige, kas arvuti kõvaketas on korralikult ühendatud

Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.

5. meetod: kontrollige toiteallikat

A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

Vigane toiteallikas

If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Method 6: Replace CMOS battery

If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.

7. meetod: ATX-i lähtestamine

Märge: See protsess kehtib üldiselt sülearvutite kohta, nii et kui teil on arvuti, jätke see meetod.

1.Power off your laptop then remove the power cord, leave it for few minutes.

2. Nüüd eemaldage aku tagant ja vajutage ja hoidke toitenuppu 15-20 sekundit all.

ühendage aku lahti

Märge: Ärge ühendage veel toitejuhet, me ütleme teile, millal seda teha.

3.Now plug in teie toitejuhe (akut ei tohiks sisestada) ja proovige sülearvutit käivitada.

4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.

If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.

Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.

Soovitan:

See on teil edukalt Fix Computer does not start until restarted multiple times issue kuid kui teil on selle juhendi kohta endiselt küsimusi, küsige neid kommentaaride jaotises.