When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Sistema eragile zaharkitua.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe ikonoa.
2. If the status is set to Ez dago konektatuta, egin klik gainean Network globe icon, choose your Wi-Fi network and click on Konektatu button. Make sure Hegazkinaren modua ez dago aktibatuta.
3. If you again face the same network connection error code, then click on the Deskonektatu button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Egin klik eskuineko botoiarekin Wi-Fi ikonoa eta hautatu Open Network & Internet settings.
6. Egin klik Wi-fi.
7. Scroll down the right menu, click on Kudeatu sare ezagunak.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Ahaztu.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Method 2: Restart Router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Ohar: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Aurkitu Pizteko botoia at the back of your router.
2. Press the button once to itzali.
3. Orain, deskonektatzeko zure Router power cable eta itxaron kondentsadoreetatik potentzia guztiz hustu arte.
4. Ondoren, berriz konektatu du power kablea eta piztu minutu bat igaro ondoren.
5. Wait until the network connection is re-established and try signing in again.
Era berean, irakurri: Konpondu ordenagailuak sarean agertzen ez diren Windows 10-n
3. metodoa: Exekutatu sareko arazoen konpontzailea
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Sakatu Windows tekla eta idatzi Arazoen ezarpenak bilaketa barran eta Ireki.
2. Egin klik Arazo berriak.
3. Aukeratu Network egokitzaile eta klikatu Exekutatu arazoen konponketa.
4. Select the network adapter to diagnose eta klikatu hurrengo.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, egin klik gainean Itxi arazo-konpontzailea.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Era berean, irakurri: Konpondu Familian partekatzea YouTube TV ez dabil
4. metodoa: Sistemaren fitxategiak konpontzea
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Sistema-fitxategia egiaztatzailea) /DISM (Inplementazio irudien horniketa eta kudeaketa) utilities on your Windows 10 PC.
1. Sakatu Windows teklaidatzi, idatzi Command gonbitetik eta klikatu Exekutatu administratzaileari.
2. Egin klik Bai in the Erabiltzaile-izen gonbita.
3. Mota chkdsk C: / f / r / x agindu eta jo Sartu gakoa.
4. Mezu bat eskatzen bazaizu, Chkdsk ezin du exekutatu... bolumena... erabilera prozesuan dago, gero, idatzi Y eta sakatu Sartu gakoa.
5. Berriz ere, idatzi komandoa: sfc / scannow eta prentsa Sartu gakoa exekutatu Sistema-fitxategia egiaztatzailea eskaneatu.
Ohar: Sistemaren azterketa bat hasiko da eta minutu pare bat beharko du amaitzeko. Bitartean, beste jarduera batzuk egiten jarraitu dezakezu, baina kontutan izan leihoa ustekabean ez ixtea.
Eskaneatu ondoren, mezu hauetako bat erakutsiko du:
- Windows Baliabideen Babesak ez du osotasun urraketarik aurkitu.
- Windows Resource Protection ezin izan da eskatutako eragiketa egin.
- Windows Resource Protection-ek fitxategi hondatuak aurkitu ditu eta behar bezala konpondu ditu.
- Windows Resource Protection-ek fitxategi hondatuak aurkitu ditu, baina ezin izan ditu horietako batzuk konpondu.
6. Eskaneatzea amaitutakoan, berrabiarazi zure ordenagailua.
7. Berriz ere, abiarazi Komando-gonbitea administratzaile gisa eta exekutatu emandako aginduak bata bestearen atzetik:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Ohar: Interneteko konexio bat izan behar duzu DISM komandoak behar bezala exekutatzeko.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Sakatu Windows tekla eta idatzi Gailu kudeatzailea in the Windows search menu. Click on Ireki.
2. Zabaldu Network moldagailu atalean klik bikoitza eginez.
3. Egin klik eskuineko botoiarekin zure gainean Sareko kontrolatzailea (adibidez, Intel (R) Dual Band Wireless-AC 3168) eta aukeratu Desgaitu gailua aukera.
4. Confirm the below prompt by clicking on Bai.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Gaitu gailua aukera.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Era berean, irakurri: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Go to the search menu and type cmd. Egin klik Exekutatu administratzaileari.
2. Idatzi honako hau komandoak eta sakatu Sartu gakoa.
netsh winsock berrezarri netsh int ip berrezarri ipconfig / release ipconfig / renew
3. Itxaron komandoak exekutatu arte eta berrabiarazi ordenagailua.
7. metodoa: garbitu DNS cachea
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Launch Command gonbitetik by searching in the Windows menu and click on Run as administrator.
2. Mota ipconfig / flushdns in the command window and hit Sartu.
Era berean, irakurri: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Abiarazi ezazu Korrika egin elkarrizketa-koadroa sakatuz Windows + R teklak elkarrekin.
2. Mota ncpa.cpl eta hit Sartu gakoa.
3. Right-click on your active sareko egokitzailea eta klikatu Properties.
4. Desmarkatu Internet protokoloaren 6. bertsioa (TCP / IPv6) aukera.
5. Azkenik, egin klik OK to save the changes and check if the issue is resolved.
Ohar: If you use multiple network connections, navigate to Sarea eta partekatzea Zentroa Aldatu egokitzailea settings. Right-click on the adapter and select Desgaitu. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Mota Gailu kudeatzailea in the Windows search menu and click Ireki.
2. Egin klik bikoitza gainean Network moldagailu zabaltzeko.
3. Egin klik eskuineko botoiarekin zure gainean kontrolatzailea (adibidez, Intel(R) Banda Bikoitzeko Haririk gabeko-AC 3168) eta egin klik Eguneratu gidaria.
4. Egin klik Arakatu ordenagailuan kontrolatzaileen bila to locate and install a driver manually.
5. Egin klik gainean Browser button to choose any directory and click on hurrengo.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Zure gailurako kontrolatzaile onenak instalatuta daude dagoeneko.
6. Egin klik Itxi leihotik irteteko.
7. Berrabiarazterik the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Launch Gailu kudeatzailea from the Windows search menu.
2. Egin klik eskuineko botoiarekin kontrolatzailea eta hautatu Desinstalatu gailua.
3. A warning prompt will be displayed on the screen. Check the box “Gailuaren softwarea ezabatu gailu honetarako” and confirm the prompt by clicking Desinstalatu.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Bisitatu fabrikatzailearen webgunea.
2. Aurki Deskargatu zure ordenagailuko Windows bertsioari dagozkion kontrolatzaileak.
3. Once downloaded, double click on the deskargatutako fitxategia and follow the given instructions to install it.
Era berean, irakurri: How to set up a VPN on Windows 10
10. metodoa: eguneratu Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Sakatu Windows+I gakoak elkarrekin irekitzeko Ezarpenak Zure ordenagailuan.
2. Aukeratu Eguneratzea eta segurtasuna.
3. Aukeratu Egiaztatu eguneraketak.
4A. Click Oraintxe bertan instala to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Eguneratuta zaude mezua.
11. metodoa: desinstalatu azken eguneraketak
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Eduki sakatuta Windows + R teklak elkarrekin irekitzeko Korrika egin elkarrizketa-koadroa.
2. Mota appwiz.cpl eta hit Sartu.
3. Egin klik Ikusi instalatutako eguneratzeak.
4. Select the most recent update and click on Desinstalatu.
5. Confirm the prompt, if any, and ordenagailua berrabiarazi.
Era berean, irakurri: Nola konpondu Firefox orriak ez kargatzen
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the sare-moldagailuak installed in your PC along with their settings. All the stored settings are stored to default settings.
Ohar: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Ezarpenak ondoren Sistema buruz. Once you have reset your network, you have to reinstall all networking software bezala VPN bezeroak or Etengailu birtualak.
1. Eduki sakatuta Windows + I teklak elkarrekin irekitzeko Windows ezarpenak.
2. Egin klik Sarea eta Internet.
3. Egin klik Sareko berrezartzea pean Status.
4. Berretsi gonbita klik eginez Berrezarri orain.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Gomendatzen da:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.