Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Thread Stuck In Device Driver Error in Windows 10 is a BSOD (Blue Screen Of Death) error which is caused by a driver file caught in an endless loop. The stop error code is 0x000000EA and as the error, itself suggests it’s the device driver issue rather than a hardware problem.

Anyway, the fix for the error is simple, update the drivers or BIOS and the problem is resolved in all most all the cases. If you can’t boot into Windows to perform the below-listed steps then boot your computer into safe mode using the installation media.

Depending on your PC you may receive one of the following errors:

• THREAD_STUCK_IN_DEVICE_DRIVER
• STOP Error 0xEA: THREAD_STUCK_IN_DEVICE_DRIVER
• The THREAD_STUCK_IN_DEVICE_DRIVER bug check has a value of 0x000000EA.

Few of the cause which can lead to Thread Stuck In Device Driver error are:

• Corrupt or old device drivers
• درگیری درایور پس از نصب سخت افزار جدید.
• Error 0xEA blue screen caused by a damaged video card.
• Old BIOS
• Bad Memory

Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

So without wasting any time let’s see How to Fix Thread Stuck In Device Driver Error in Windows 10 با کمک راهنمای عیب یابی لیست شده در زیر.

روش 1: درایورهای کارت گرافیک را به روز کنید

If you’re facing the Thread Stuck In Device Driver Error in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face issues such as screen flickering, screen turning on/off, display not working correctly, etc you may need to update your graphics card drivers in order to fix the underlying cause. If you face any such issues then you can easily update graphics card drivers with the help of this guide.

روش 2: شتاب سخت افزاری را غیرفعال کنید

1. کلید Windows + I را فشار دهید تا باز شود تنظیمات سپس کلیک کنید سیستم. 

2. From the left-hand side menu, select نمایش دادن. Now at the bottom of the Display window, click on the Advanced display settings.

3. حالا به بروید the Troubleshoot tab کلیک کنید و تغییر تنظیمات.

4. بکشید Hardware Acceleration slider به هیچکدام

5. Click Ok then Apply and restart your PC.

6. If you don’t have the troubleshoot tab then right-click on the desktop and select صفحه کنترل NVIDIA (Every graphic card has their own control panel).

7. From the NVIDIA Control Panel, select “Set PhysX configuration” from the left column.

8. Next, under select, a PhysX processor make sure the CPU is selected.

9. Click Apply to save the changes. This will disable NVIDIA PhysX GPU acceleration.

10. کامپیوتر خود را مجددا راه اندازی کنید و ببینید آیا می توانید fix thread stuck in device driver error in Windows 10, if not, continue.

Method 3: Run SFC and DISM tool

1. Windows Key + X را فشار دهید و سپس بر روی آن کلیک کنید خط فرمان (Admin).

2. حالا عبارت زیر را در cmd تایپ کنید و اینتر را بزنید:

Sfc / scannow

3. منتظر بمانید تا فرآیند فوق به پایان برسد و پس از اتمام، کامپیوتر خود را مجددا راه اندازی کنید.

4. If you are able to fix Thread Stuck in device driver error in Windows 10 issue then great, if not then continue.

5. دوباره cmd را باز کنید و دستور زیر را تایپ کنید و بعد از هر کدام اینتر را بزنید.

Dism /آنلاین /Cleanup-Image /CheckHealth Dism /آنلاین /Cleanup-Image /ScanHealth Dism /آنلاین /Cleanup-Image /RestoreHealth

6. اجازه دهید دستور DISM اجرا شود و منتظر بمانید تا تمام شود.

7.  If the above command doesn’t work then try on the below:

Dism /Image:C:offline /Cleanup-Image /RestoreHealth /Source:c:testmountwindows Dism /Online /Cleanup-Image /RestoreHealth /منبع:c:testmountwindows /LimitAccess

توجه داشته باشید: C:RepairSourceWindows را با محل منبع تعمیر خود (نصب ویندوز یا دیسک بازیابی) جایگزین کنید.

7. برای ذخیره تغییرات کامپیوتر خود را ریبوت کنید.

Method 4: Perform Windows update

Sometimes pending Windows update can cause a problem with the drivers, hence it’s recommended to update Windows.

1 مطبوعات Windows Key+ من برای باز کردن تنظیمات و سپس کلیک کنید بروزرسانی و امنیت

2. From the left-hand side, menu click on به روز رسانی ویندوز.

3. حالا بر روی “بررسی برای به روز رسانیدکمه ” برای بررسی هر گونه به روز رسانی موجود.

4. If any updates are pending then click on دانلود و نصب به روز رسانی.

5. Once the updates are downloaded, install them and your Windows will become up-to-date.

6. After the updates are installed reboot your PC to save changes.

Method 5: Run Windows 10 BSOD Troubleshooter

If you are using Windows 10 Creators update or later, you can use Windows inbuilt Troubleshooter to fix Blue Screen of Death Error (BSOD).

1. Press Windows key + I to open Settings then click on ‘به روز رسانی و امنیت".

2. From the left pane, select ‘عیب یابی".

3. به پایین بروید تا به "مشکلات دیگر را پیدا و برطرف کنیدبخش ها

4. بر روی 'کلیک کنیدصفحه آبی'و کلیک کنید'مشکلی را اجرا کنید".

Method 6: Give Graphics Card Access to the Application

1. Windows Key + I را فشار دهید تا Settings باز شود و سپس روی آن کلیک کنید سیستم.

2. از منوی سمت چپ انتخاب کنید نمایش دادن سپس کلیک کنید Graphics settings link در پایین

3. Select the type of app, if you can’t find your app or game in the list then select the برنامه کلاسیک and then use the “مرور کردن" گزینه.

4. Navigate to your application or game، آن را انتخاب کنید و کلیک کنید را باز کنید.

5. Once the app is added to the list, click on it then again click on گزینه.

6 انتخاب کنید "کارایی بالا” and click on Save.

7. برای ذخیره تغییرات کامپیوتر خود را ریبوت کنید.

Method 7: Update BIOS (Basic Input/Output System)

BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10. Sometimes, the older BIOS doesn’t support new features and that is why you can face the Thread Stuck in device driver error. In order to fix resolve the underlying issue, you need to update BIOS using this guide.

Method 8: Reset Overclocking Settings

If you’re overclocking your PC then this might explains why you’re facing the Thread Stuck in device driver error, as this overclocking software puts a strain on your PC hardware which is why PC restarts unexpectedly giving the BSOD error. To fix this issue simply reset the overclocking settings or remove any overclocking software.

Method 9: Faulty GPU

Chances are the GPU installed on your system might be faulty, so one way to check this is to remove the dedicated graphic card and leave the system with only integrated one and see if the issue is resolved or not. If the issue is resolved then your GPU is faulty and you need to replace it with a new one but before that, you could try cleaning your graphic card and again place it in the motherboard to see it’s working or not.

روش 10: منبع تغذیه را بررسی کنید

A faulty or failing Power Supply is generally the cause for the Bluescreen of death errors. Because the power consumption of hard disk is not met, it won’t get enough power to run, and subsequently, you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

If you have recently installed new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporarily remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

این چیزی است که شما با موفقیت انجام داده اید Fix Thread Stuck In Device Driver Error in Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.