Feabhra 20, 2017

Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Thread Stuck In Device Driver Error in Windows 10 is a BSOD (Blue Screen Of Death) error which is caused by a driver file caught in an endless loop. The stop error code is 0x000000EA and as the error, itself suggests it’s the device driver issue rather than a hardware problem.

Fix Thread Stuck In Device Driver Windows 10

Anyway, the fix for the error is simple, update the drivers or BIOS and the problem is resolved in all most all the cases. If you can’t boot into Windows to perform the below-listed steps then boot your computer into safe mode using the installation media.

Depending on your PC you may receive one of the following errors:

  • THREAD_STUCK_IN_DEVICE_DRIVER
  • STOP Error 0xEA: THREAD_STUCK_IN_DEVICE_DRIVER
  • The THREAD_STUCK_IN_DEVICE_DRIVER bug check has a value of 0x000000EA.

Few of the cause which can lead to Thread Stuck In Device Driver error are:

  • Corrupt or old device drivers
  • Coimhlint tiománaithe tar éis crua-earraí nua a shuiteáil.
  • Error 0xEA blue screen caused by a damaged video card.
  • Old BIOS
  • Bad Memory

Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

So without wasting any time let’s see How to Fix Thread Stuck In Device Driver Error in Windows 10 le cabhair ón treoir fabhtcheartaithe thíos-liostaithe.

Modh 1: Nuashonraigh Tiománaithe Cárta Grafach

If you’re facing the Thread Stuck In Device Driver Error in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face issues such as screen flickering, screen turning on/off, display not working correctly, etc you may need to update your graphics card drivers in order to fix the underlying cause. If you face any such issues then you can easily update graphics card drivers with the help of this guide.

Update your Graphics Card Driver | Fix Thread Stuck In Device Driver Error in Windows 10

Modh 2: Díchumasaigh Luasghéarú Crua-earraí

1. Brúigh Windows Key + I a oscailt Socruithe ansin cliceáil ar Córas. 

Brúigh Windows Key + I chun Socruithe a oscailt agus ansin cliceáil ar Córas

2. From the left-hand side menu, select Taispeáin. Now at the bottom of the Display window, click on the Advanced display settings.

3. Anois téigh go the Troubleshoot tab agus cliceáil Athraigh Socruithe.

change settings in troubleshoot tab in advanced display properties

4. Tarraing an Hardware Acceleration slider to None

Drag the Hardware Acceleration slider to None

5. Click Ok then Apply and restart your PC.

6. If you don’t have the troubleshoot tab then right-click on the desktop and select Painéal Rialúcháin NVIDIA (Every graphic card has their own control panel).

Right-click on the desktop and select NVIDIA Control Panel

7. From the NVIDIA Control Panel, select “Set PhysX configuration” from the left column.

8. Next, under select, a PhysX processor make sure the CPU is selected.

disable hardware acceleration from NVIDIA control panel | Fix Thread Stuck In Device Driver Error

9. Click Apply to save the changes. This will disable NVIDIA PhysX GPU acceleration.

10. Atosaigh do ríomhaire agus féach an bhfuil tú in ann fix thread stuck in device driver error in Windows 10, if not, continue.

Method 3: Run SFC and DISM tool

1. Brúigh Windows Key + X ansin cliceáil ar Leid Ordú(Riarachán).

ordú leid le cearta riaracháin

2. Anois clóscríobh an méid seo a leanas sa cmd agus brúigh Enter:

Sfc / scannow

SFC scanadh anois ordú go pras

3. Fan go gcríochnóidh an próiseas thuas agus atosaigh do ríomhaire nuair a bheidh sé déanta.

4. If you are able to fix Thread Stuck in device driver error in Windows 10 issue then great, if not then continue.

5. Arís oscail cmd agus clóscríobh an t-ordú seo a leanas agus brúigh Enter tar éis gach ceann:

Dism / Ar Líne / Glanta-Íomhá / CheckHealth Dism / Ar Líne / Glanadh Íomhá / ScanHealth Dism / Ar Líne / Glanadh Íomhá / RestoreHealth

DISM córas sláinte a chur ar ais

6. Lig don ordú DISM a reáchtáil agus fanacht go gcríochnóidh sé.

7.  If the above command doesn’t work then try on the below:

Dism / Íomhá:C: as líne / Glanta-Íomhá / RestoreHealth / Foinse:c:testmountwindows Dism / Ar Líne / Glanta Íomhá / RestoreHealth / Foinse:c:testmountwindows /LimitAccess

Nóta: Ionadaigh an C:RepairSourceWindows le suíomh d'fhoinse deisiúcháin (Suiteáil Windows nó Diosca Aisghabhála).

7. Atosaigh do ríomhaire chun athruithe a shábháil.

Method 4: Perform Windows update

Sometimes pending Windows update can cause a problem with the drivers, hence it’s recommended to update Windows.

1. Brúigh Eochair Windows + I Socruithe a oscailt ansin cliceáil ar Nuashonrú & Slándáil.

Brúigh Windows Key + I chun Socruithe a oscailt agus ansin cliceáil ar an deilbhín Nuashonraithe & Slándála

2. Ó thaobh na láimhe clé, cliceáil ar an roghchlár Windows Update.

3. Anois cliceáil ar an “Seiceáil do nuashonruithe” cnaipe chun aon nuashonruithe atá ar fáil a sheiceáil.

Check for Windows Updates | Fix Thread Stuck In Device Driver Error in Windows 10

4. Má tá aon nuashonruithe ar feitheamh ansin cliceáil ar Íoslódáil agus Suiteáil nuashonruithe.

Seiceáil le haghaidh Nuashonrú Tosóidh Windows ag íosluchtú nuashonruithe

5. Nuair a bheidh na nuashonruithe íoslódáilte, suiteáil iad agus éireoidh do Windows cothrom le dáta.

6. Tar éis na nuashonruithe a shuiteáil Atosaigh do ríomhaire chun athruithe a shábháil.

Method 5: Run Windows 10 BSOD Troubleshooter

If you are using Windows 10 Creators update or later, you can use Windows inbuilt Troubleshooter to fix Blue Screen of Death Error (BSOD).

1. Press Windows key + I to open Settings then click on ‘Nuashonrú & Slándáil'.

Brúigh Windows Key + I chun Socruithe a oscailt agus ansin cliceáil ar an deilbhín Nuashonraithe & Slándála

2. From the left pane, select ‘Troubleshoot'.

3. Scrollaigh síos go dtí 'Fadhbanna eile a aimsiú agus a shocrú' ailt.

4. Cliceáil ar 'Scáileán Gorm' agus cliceáil ar 'Rith an fabhtcheartaitheoir'.

Click on ‘Blue Screen’ and click on ‘Run the troubleshooter’

Method 6: Give Graphics Card Access to the Application

1. Brúigh Windows Key + I chun Socruithe a oscailt ansin cliceáil ar Córas.

Brúigh eochair Windows + I chun Socruithe a oscailt agus ansin cliceáil ar Córas

2. Ón roghchlár ar chlé roghnaigh Taispeáin ansin cliceáil ar Graphics settings link ag bun an leathanaigh.

Select Display then click on Graphics settings link at the bottom

3. Select the type of app, if you can’t find your app or game in the list then select the App clasaiceach and then use the “Brabhsáil"Rogha.

Select the Classic app and then use the Browse option

4. Navigate to your application or game, roghnaigh é, agus cliceáil Oscailte.

5. Once the app is added to the list, click on it then again click on Roghanna.

Once the app is added to the list, click on it then again click on Options

6. Roghnaigh “Ard-fheidhmíocht” and click on Save.

Select High performance and click on Save

7. Atosaigh do ríomhaire chun athruithe a shábháil.

Method 7: Update BIOS (Basic Input/Output System)

nótaí

Performing BIOS update is a critical task and if something goes wrong it can seriously damage your system, therefore, expert supervision is recommended.

BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10. Sometimes, the older BIOS doesn’t support new features and that is why you can face the Thread Stuck in device driver error. In order to fix resolve the underlying issue, you need to update BIOS using this guide.

What is BIOS and how to update BIOS | Fix Thread Stuck In Device Driver Error in Windows 10

Method 8: Reset Overclocking Settings

If you’re overclocking your PC then this might explains why you’re facing the Thread Stuck in device driver error, as this overclocking software puts a strain on your PC hardware which is why PC restarts unexpectedly giving the BSOD error. To fix this issue simply reset the overclocking settings or remove any overclocking software.

Method 9: Faulty GPU

Chances are the GPU installed on your system might be faulty, so one way to check this is to remove the dedicated graphic card and leave the system with only integrated one and see if the issue is resolved or not. If the issue is resolved then your GPU is faulty and you need to replace it with a new one but before that, you could try cleaning your graphic card and again place it in the motherboard to see it’s working or not.

Aonad Próiseála Grafach

Modh 10: Seiceáil Soláthar Cumhachta

A faulty or failing Power Supply is generally the cause for the Bluescreen of death errors. Because the power consumption of hard disk is not met, it won’t get enough power to run, and subsequently, you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

Soláthar Cumhachta lochtach

If you have recently installed new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporarily remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Sin é atá agat go rathúil Fix Thread Stuck In Device Driver Error in Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.