Gearran 20, 2017

Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Thread Stuck In Device Driver Error in Windows 10 is a BSOD (Blue Screen Of Death) error which is caused by a driver file caught in an endless loop. The stop error code is 0x000000EA and as the error, itself suggests it’s the device driver issue rather than a hardware problem.

Fix Thread Stuck In Device Driver Windows 10

Anyway, the fix for the error is simple, update the drivers or BIOS and the problem is resolved in all most all the cases. If you can’t boot into Windows to perform the below-listed steps then boot your computer into safe mode using the installation media.

Depending on your PC you may receive one of the following errors:

  • THREAD_STUCK_IN_DEVICE_DRIVER
  • STOP Error 0xEA: THREAD_STUCK_IN_DEVICE_DRIVER
  • The THREAD_STUCK_IN_DEVICE_DRIVER bug check has a value of 0x000000EA.

Few of the cause which can lead to Thread Stuck In Device Driver error are:

  • Corrupt or old device drivers
  • Còmhstri dhràibhearan às deidh dhut bathar-cruaidh ùr a chuir a-steach.
  • Error 0xEA blue screen caused by a damaged video card.
  • Old BIOS
  • Droch Chuimhne

Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Mar sin gun a bhith a’ caitheamh ùine sam bith chì sinn mar a nì thu Fix Thread Stuck In Device Driver Error in Windows 10 le cuideachadh bhon stiùireadh fuasgladh cheistean gu h-ìosal.

Dòigh 1: Ùraich draibhearan cairt grafaigeachd

If you’re facing the Thread Stuck In Device Driver Error in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face issues such as screen flickering, screen turning on/off, display not working correctly, etc you may need to update your graphics card drivers in order to fix the underlying cause. If you face any such issues then you can easily update graphics card drivers with the help of this guide.

Update your Graphics Card Driver | Fix Thread Stuck In Device Driver Error in Windows 10

Dòigh 2: Cuir à comas luathachadh bathar-cruaidh

1. Brùth Windows Key + I gus fhosgladh roghainnean an uairsin cliog air Siostam. 

Brùth Windows Key + I gus Settings fhosgladh agus an uairsin cliog air System

2. From the left-hand side menu, select taisbeanaidh. Now at the bottom of the Display window, click on the Advanced display settings.

3. A-nis rachaibh gu the Troubleshoot tab agus briog air Atharraich na roghainnean.

change settings in troubleshoot tab in advanced display properties

4. Slaod an Hardware Acceleration slider gu Chan eil

Drag the Hardware Acceleration slider to None

5. Click Ok then Apply and restart your PC.

6. If you don’t have the troubleshoot tab then right-click on the desktop and select Pannal Smachd NVIDIA (Every graphic card has their own control panel).

Right-click on the desktop and select NVIDIA Control Panel

7. From the NVIDIA Control Panel, select “Set PhysX configuration” from the left column.

8. Next, under select, a PhysX processor make sure the CPU is selected.

disable hardware acceleration from NVIDIA control panel | Fix Thread Stuck In Device Driver Error

9. Click Apply to save the changes. This will disable NVIDIA PhysX GPU acceleration.

10. Ath-thòisich am PC agad agus faic a bheil e comasach dhut fix thread stuck in device driver error in Windows 10, if not, continue.

Method 3: Run SFC and DISM tool

1. Brùth Windows Key + X an uairsin cliog air Pìos-stiùiridh (Rianachd).

òrdugh sgiobalta le còraichean rianachd

2. A-nis cuir a-steach na leanas anns an cmd agus buail a-steach:

Sfc / scannow

Dèan scan SFC a-nis gu sgiobalta

3. Fuirich airson a 'phròiseas gu h-àrd a chrìochnachadh agus aon uair' dèanamh ath-thòisich do PC.

4. If you are able to fix Thread Stuck in device driver error in Windows 10 issue then great, if not then continue.

5. A-rithist fosgail cmd agus dèan an àithne a leanas agus buail a-steach às deidh gach fear:

Dism / Air-loidhne / Glanadh-Ìomhaigh / CheckHealth Dism / Air-loidhne / Glanadh-Ìomhaigh / ScanHealth Dism / Air-loidhne / Glanadh-Ìomhaigh / RestoreHealth

DISM siostam slàinte ath-nuadhachadh

6. Leig leis an àithne DISM ruith agus feitheamh gus an crìochnaich e.

7.  If the above command doesn’t work then try on the below:

Dism / Ìomhaigh: C: far loidhne / Glanadh-Ìomhaigh / RestoreHealth / Stòr: c:testmountwindows Dism / Air-loidhne / Glanadh-Ìomhaigh / RestoreHealth / Stòr: c:testmountwindows / LimitAccess

Note: Cuir an àite an stòr càraidh agad (Windows Installation or Recovery Disc) an àite an C:RepairSourceWindows).

7. Ath-thòisich am PC agad gus atharrachaidhean a shàbhaladh.

Method 4: Perform Windows update

Sometimes pending Windows update can cause a problem with the drivers, hence it’s recommended to update Windows.

1. Brùth Windows Key+ Tha mi airson Settings fhosgladh agus an uairsin cliog air Ùrachadh & Tèarainteachd.

Brùth Windows Key + I gus Settings fhosgladh agus an uairsin cliog air ìomhaigh Ùrachadh & tèarainteachd

2. Bhon taobh chlì, clàr-taice cliog air Ùrachadh Windows.

3. A-nis cliog air “Dèan cinnteach airson ùrachaidhean” putan gus sùil a thoirt airson ùrachaidhean sam bith a tha rim faighinn.

Check for Windows Updates | Fix Thread Stuck In Device Driver Error in Windows 10

4. Ma tha ùrachaidhean sam bith a' feitheamh an uair sin cliog air Luchdaich sìos & stàlaich ùrachaidhean.

Thoir sùil airson Ùrachadh tòisichidh Windows a’ luchdachadh sìos ùrachaidhean

5. Aon uair 's gu bheil na h-ùrachaidhean air an luchdachadh sìos, stàlaich iad agus fàsaidh do Windows ùrachadh.

6. Às deidh na h-ùrachaidhean a bhith air an stàladh ath-thòiseachadh do PC gus atharrachaidhean a shàbhaladh.

Method 5: Run Windows 10 BSOD Troubleshooter

If you are using Windows 10 Creators update or later, you can use Windows inbuilt Troubleshooter to fix Blue Screen of Death Error (BSOD).

1. Press Windows key + I to open Settings then click on ‘Ùrachadh & Tèarainteachd'

Brùth Windows Key + I gus Settings fhosgladh agus an uairsin cliog air ìomhaigh Ùrachadh & tèarainteachd

2. From the left pane, select ‘Troubleshoot'

3. Scrollaich sìos gu 'Lorg agus socraich duilgheadasan eile'earrannan.

4. Cliog air 'Sgrion gorm' agus cliog air 'Cùm an tubaist-luirg'

Click on ‘Blue Screen’ and click on ‘Run the troubleshooter’

Method 6: Give Graphics Card Access to the Application

1. Brùth Windows Key + I gus Settings fhosgladh agus an uairsin cliog air Siostam.

Brùth iuchair Windows + I gus Settings fhosgladh agus an uairsin cliog air System

2. Bho chlàr-taice air an taobh chlì tagh taisbeanaidh an uairsin cliog air Graphics settings link aig a 'bhonn.

Select Display then click on Graphics settings link at the bottom

3. Select the type of app, if you can’t find your app or game in the list then select the App clasaigeach and then use the “Rùraich"Roghainn.

Select the Classic app and then use the Browse option

4. Navigate to your application or game, tagh e, agus cliog Fosgailte.

5. Once the app is added to the list, click on it then again click on Roghainnean.

Once the app is added to the list, click on it then again click on Options

6. Tagh “Àrd-coileanaidh” and click on Save.

Select High performance and click on Save

7. Ath-thòisich am PC agad gus atharrachaidhean a shàbhaladh.

Method 7: Update BIOS (Basic Input/Output System)

Nota

Performing BIOS update is a critical task and if something goes wrong it can seriously damage your system, therefore, expert supervision is recommended.

BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10. Sometimes, the older BIOS doesn’t support new features and that is why you can face the Thread Stuck in device driver error. In order to fix resolve the underlying issue, you need to update BIOS using this guide.

What is BIOS and how to update BIOS | Fix Thread Stuck In Device Driver Error in Windows 10

Method 8: Reset Overclocking Settings

If you’re overclocking your PC then this might explains why you’re facing the Thread Stuck in device driver error, as this overclocking software puts a strain on your PC hardware which is why PC restarts unexpectedly giving the BSOD error. To fix this issue simply reset the overclocking settings or remove any overclocking software.

Method 9: Faulty GPU

Chances are the GPU installed on your system might be faulty, so one way to check this is to remove the dedicated graphic card and leave the system with only integrated one and see if the issue is resolved or not. If the issue is resolved then your GPU is faulty and you need to replace it with a new one but before that, you could try cleaning your graphic card and again place it in the motherboard to see it’s working or not.

Aonad giollachd grafaigeach

Dòigh 10: Thoir sùil air solar cumhachd

A faulty or failing Power Supply is generally the cause for the Bluescreen of death errors. Because the power consumption of hard disk is not met, it won’t get enough power to run, and subsequently, you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

Solar cumhachd lochtach

If you have recently installed new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporarily remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Sin agad e gu soirbheachail Fix Thread Stuck In Device Driver Error in Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.