Inneal USB nach eil ag obair ann Windows 10 [SOLVED]

USB Device not working in Windows 10 is a common problem that arises when dealing with USB. Typically USB Device not working error is shown after a USB device such as a printer, scanner, External drive, Hard disk, or Pen drive is connected to the computer. Sometimes when this error occurs, the Device Manager may list an “Unkown Device” in Universal Serial Bus controllers.

In this guide, you can find all information regarding the USB Device not working in Windows 10 issue. After spending a lot of time we have come up with these few working solutions on how to fix USB Device not working issue. Please try all the methods listed below, before you come to any conclusion.

Different types of error you may receive when dealing with USB Device not working:

1. USB Device not recognized
2. Unrecognized USB device in Device Manager
3. USB Device driver software was not successfully installed
4. Tha Windows air stad a chuir air an inneal seo leis gu bheil e air duilgheadasan aithris (Còd 43).
5. Windows can’t stop your “Generic volume” device because a program is still using it.

Fix USB Device Not Working in Windows 10 [SOLVED]

Common Causes of the USB Device not working error:

1. Corrupted or outdated USB drivers.
2. The USB device may have malfunctioned.
3. Host controller hardware malfunction.
4. The computer does not support USB 2.0 or USB 3.0
5. USB Generic Hub drivers are not compatible or are corrupted.

Now let’s see How to Fix USB Device Not Working in Windows 10 with the help of the below-listed troubleshooting guide.

Method 1: Disable EnhancedPowerManagementEnabled

1. Press Windows Key + R and type “devmgmt.msc” an uairsin buail a-steach gus am Manaidsear Innealan fhosgladh.

2. Now expand Riaghladairean Bus Serialil Uile-choitcheann.

3. Next, plug in your USB device which is experiencing a problem, and notice the change in the Universal Serial Bus controllers i.e. you will see the list updated with your Device.

Note: You may have to use hit and trial in order to identify your device and in doing so you have to connect/disconnect your USB device multiple times. Always use the “Safely remove” option when disconnecting your USB device.

4. After you have identified your device in Universal Serial Bus controllers, right-click on it and select seilbh.

5. Next switch to Details tab and from Property drop-down select “Device instance path."

6. Thoir an aire sìos an value of the Device instance path because we will need it further or right-click and copy it.

7. Brùth Windows Key + R agus an seòrsa “s an Iar-” then hit enter to open Registry Editor.

8. Navigate to the following:

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetEnumUSB<Device Instance Path>Device Parameters

9. Now search for the DWORD EnhancedPowerManagementEnabled and Double click on it.

Note: If you couldn’t find the DWORD create one by right-click, then select New and then DWORD (32-bit) value. And name the DWORD as “EnhancedPowerManagementEnabled” then enter 0 in the value and click OK.

10. Change its value from 1 gu 0 agus cliog air OK.

11. You may now close the Registry Editor as well as Device Manager.

12. Reboot your PC to apply changes and this may be able to fix USB Device Not Working in Windows 10 issue.

Method 2: Run Hardware and Device Troubleshooter

1. Open Control Panel using the Windows search bar.

2. Tagh Control Panel from the search list. The Control Panel window will open up.

3. Lorg airson Proiseactair using the search bar on the top right corner of the Control Panel screen.

4. Cliog air Fuasgladh dhuilgheadasan bhon toradh rannsachaidh.

5. The troubleshooting window will open up.

6. Cliog air Hardware and Sound option.

7. Under Hardware and Sound, click on Configure a device option.

8. You will be prompted to find and enter the administrator password. Enter the password and then click on the confirmation.

9. The Hardware and Devices Troubleshooter window will open up.

10. Cliog air a 'phutan An ath phutan that will be on the bottom of the screen to run the Hardware and Devices troubleshooter.

11. The troubleshooter will start detecting issues. If issues are found on your system, then you will be prompted to fix the issues.

Method 3: Update your Device Driver

1. Brùth Windows Key + R agus an seòrsa “devmgmt.msc” an uairsin buail a-steach gus am Manaidsear Innealan fhosgladh.

2. Now expand Riaghladairean Bus Serialil Uile-choitcheann.

3. Next right-click on the device which you earlier identified in Method 1 and select “Ùraich bathar-bog draibhear."

4. Tagh “Lorg gu fèin-ghluasadach airson bathar-bog dràibhear ùraichte."

5. Let the process finish and see if you’re able to fix the issue.

6. If not, then again repeat step 3. This time select “Thoir sùil air a ’choimpiutair agam airson bathar-bog draibhear."

7. Tagh “Leig leam taghadh bho liosta de dhraibhearan inneal air a ’choimpiutair agam."

8. An ath rud, tagh Inneal mòr stòraidh USB agus briog air Next.

Note: Make sure Show compatible hardware is checked.

9. Click close and also close the Device Manager.

10. Reboot to apply your changes and this may be able to Fix USB Device Not Working in Windows 10.

Method 4: Automatically diagnose and fix Windows USB problems

1. Navigate to this link agus cliog air a’ phutan Luchdaich sìos.

2. When the page has finished loading, scroll down, and click Luchdaich sìos.

3. Once the file is downloaded, double-click the file to open the Windows USB Troubleshooter.

4. Click next and let Windows USB Troubleshooter run.

5. IF you have any attached devices then USB Troubleshooter will ask for confirmation to eject them.

6. Check the USB device connected to your PC and click Next.

7. If the problem is found, click on Cuir a-steach am fuasgladh seo.

8. Ath-thòisich am PC agad.

Method 5: Install the latest Intel device drivers.

1. Luchdaich a-nuas am prògram Intel driver Updater.

2. Run Driver Update Utility agus cliog An ath-.

3. Gabh ris an aonta ceadachais agus cliog air Stàlaich.

4. Wait for Intel Driver Update Utility to initialize and install all required programs and files.

5. After System Update has finished click Cur air bhog.

6. A-nis tagh Tòisich Scan and when the driver scan is completed, click on Luchdaich sìos.

7. All the Drivers will be downloaded to your default download directory mentioned in the bottom left.

8. Mu dheireadh, cliog air Stàlaich to install the latest Intel drivers for your PC.

9. When the driver installation is completed, reboot your computer.

Feuch an urrainn dhut fix USB Device Not Working in Windows 10 issue, mura h-eil an uairsin lean air adhart leis an ath dhòigh.

Method 6: Run Windows Disk Error Checking

1. Brùth Windows Key + R an uairsin tiotal Diskmgmt.msc agus bhuail Enter.

2. Next right-click on your Draibheadh ​​USB agus tagh Feartan.

3. A nis theirig gu na Clàr innealan inside properties.

4. Cliog air Check-in Error Checking.

5. When the USB Error Checking is completed, close everything, and Reboot.

Air a mholadh dhut:

That’s it,  you have successfully Fix USB Device Not Working in Windows 10 issue. I hope one of the above-listed methods has fixed your problem/issue successfully and if you still have any queries regarding this guide feel free to ask them in comments. And share this post with your family or friends to help them in dealing with USB errors.