When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- જૂની ઓપરેટિંગ સિસ્ટમ.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe ચિહ્ન
2. If the status is set to જોડાયેલ નથી, પર ક્લિક કરો Network globe icon, choose your Wi-Fi network and click on જોડાવા button. Make sure વિમાન મોડ ચાલુ નથી.
3. If you again face the same network connection error code, then click on the ડિસ્કનેક્ટ કરો button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. પર જમણું-ક્લિક કરો વાઇ વૈજ્ઞાનિક ચિહ્ન અને પસંદ કરો Open Network & Internet settings.
6. પર ક્લિક કરો Wi-Fi.
7. Scroll down the right menu, click on જાણીતા નેટવર્ક્સ મેનેજ કરો.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select ભૂલી જાઓ.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
પદ્ધતિ 2: રાઉટર પુનઃપ્રારંભ કરો
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
નૉૅધ: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. શોધો પાવર બટન at the back of your router.
2. Press the button once to તેને બંધ કરો.
Now. હવે, ડિસ્કનેક્ટ તમારા Router power cable અને કેપેસિટર્સમાંથી પાવર સંપૂર્ણપણે નીકળી જાય ત્યાં સુધી રાહ જુઓ.
4. પછી, ફરીથી કનેક્ટ કરો આ પાવર વાયર અને એક મિનિટ પછી તેને ચાલુ કરો.
5. Wait until the network connection is re-established and try signing in again.
આ પણ વાંચો: Windows 10 માં નેટવર્ક પર દેખાતા નથી તેવા કમ્પ્યુટર્સને ઠીક કરો
પદ્ધતિ 3: નેટવર્ક મુશ્કેલીનિવારણ ચલાવો
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. હિટ કરો વિન્ડોઝ કી અને પ્રકાર મુશ્કેલીનિવારણ સેટિંગ્સ સર્ચ બારમાં અને ખુલ્લું
2. પર ક્લિક કરો વધારાના મુશ્કેલીનિવારણ.
3. પસંદ કરો નેટવર્ક એડેપ્ટર અને પર ક્લિક કરો મુશ્કેલીનિવારક ચલાવો.
4. Select the network adapter to diagnose અને પર ક્લિક કરો આગળ.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, ઉપર ક્લિક કરો મુશ્કેલીનિવારણને બંધ કરો.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
આ પણ વાંચો: કૌટુંબિક શેરિંગ YouTube ટીવી કામ કરતું નથી તેને ઠીક કરો
પદ્ધતિ 4: સિસ્ટમ ફાઇલોનું સમારકામ
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (સિસ્ટમ ફાઇલ તપાસનાર) /DISM (જમાવટ ઇમેજ સર્વિસિંગ અને મેનેજમેન્ટ) utilities on your Windows 10 PC.
1. હિટ કરો વિન્ડોઝ કી, પ્રકાર કમાંડ પ્રોમ્પ્ટ અને પર ક્લિક કરો સંચાલક તરીકે ચલાવો.
2. પર ક્લિક કરો હા માં વપરાશકર્તા ખાતું નિયંત્રણ પ્રોમ્પ્ટ.
3. પ્રકાર chkdsk C: / f / r / x આદેશ અને હિટ કી દાખલ કરો.
4. જો તમને સંદેશ સાથે પૂછવામાં આવે, Chkdsk ચાલી શકતું નથી... વોલ્યુમ છે... ઉપયોગની પ્રક્રિયામાં છે, પછી, ટાઈપ કરો Y અને હિટ કી દાખલ કરો.
5. ફરીથી, આદેશ લખો: એસસીસી / સ્કેનૉ અને દબાવો કી દાખલ કરો ચલાવવા માટે સિસ્ટમ ફાઇલ તપાસનાર સ્કેન.
નૉૅધ: સિસ્ટમ સ્કેન શરૂ કરવામાં આવશે અને તેને સમાપ્ત થવામાં થોડી મિનિટો લાગશે. દરમિયાન, તમે અન્ય પ્રવૃત્તિઓ કરવાનું ચાલુ રાખી શકો છો પરંતુ આકસ્મિક રીતે વિન્ડો બંધ ન કરવાનું ધ્યાન રાખો.
સ્કેન પૂર્ણ કર્યા પછી, તે આમાંથી કોઈપણ સંદેશા બતાવશે:
- વિન્ડોઝ રિસોર્સ પ્રોટેક્શનને કોઈ અખંડિતતાનું ઉલ્લંઘન મળ્યું નથી.
- વિન્ડોઝ રિસોર્સ પ્રોટેક્શન વિનંતી કરેલ ઑપરેશન કરી શક્યું નથી.
- વિન્ડોઝ રિસોર્સ પ્રોટેક્શનને દૂષિત ફાઇલો મળી અને તેને સફળતાપૂર્વક રિપેર કરી.
- વિન્ડોઝ રિસોર્સ પ્રોટેક્શનને દૂષિત ફાઇલો મળી પરંતુ તેમાંથી કેટલીકને ઠીક કરવામાં અસમર્થ હતી.
6. એકવાર સ્કેન પૂર્ણ થઈ જાય, પુનઃપ્રારંભ તમારા પીસી.
7. ફરીથી, લોંચ કરો સંચાલક તરીકે આદેશ પ્રોમ્પ્ટ અને આપેલ આદેશો એક પછી એક ચલાવો:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
નૉૅધ: DISM આદેશોને યોગ્ય રીતે ચલાવવા માટે તમારી પાસે કાર્યરત ઇન્ટરનેટ કનેક્શન હોવું આવશ્યક છે.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. હિટ કરો વિન્ડોઝ કી અને પ્રકાર ઉપકરણ સંચાલક in the Windows search menu. Click on ઓપન.
2. વિસ્તૃત કરો નેટવર્ક ઍડપ્ટર તેના પર ડબલ-ક્લિક કરીને વિભાગ.
3. તમારા પર જમણું-ક્લિક કરો નેટવર્ક ડ્રાઈવર (દાખ્લા તરીકે, Intel (R) Dual Band Wireless-AC 3168) અને પસંદ કરો ઉપકરણ નિષ્ક્રિય કરો વિકલ્પ.
4. Confirm the below prompt by clicking on હા.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the ઉપકરણ સક્ષમ કરો વિકલ્પ.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
આ પણ વાંચો: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. શોધ મેનૂ પર જાઓ અને ટાઇપ કરો સીએમડી. ઉપર ક્લિક કરો સંચાલક તરીકે ચલાવો.
2. નીચેના લખો આદેશો અને હિટ કી દાખલ કરો.
નેટસ વિન્સૉક રીસેટ netsh પૂર્ણાંક આઇપી ફરીથી સેટ કરો ipconfig / પ્રકાશન ipconfig / નવીકરણ
3. આદેશો અમલમાં આવે ત્યાં સુધી રાહ જુઓ અને તમારા પીસીને રીબૂટ કરો.
પદ્ધતિ 7: DNS કેશ ફ્લશ કરો
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. લોંચ કરો કમાંડ પ્રોમ્પ્ટ by searching in the વિન્ડોઝ મેનુ and click on Run as administrator.
2. પ્રકાર ipconfig / flushdns in the command window and hit દાખલ કરો.
આ પણ વાંચો: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. શરૂ કરો ચલાવો દબાવીને ડાયલોગ બોક્સ વિન્ડોઝ + આર કીઓ સાથે મળીને.
2. પ્રકાર ncpa.cpl અને હિટ કી દાખલ કરો.
3. Right-click on your active નેટવર્ક એડેપ્ટર અને પર ક્લિક કરો ગુણધર્મો.
4. અનચેક કરો ઇન્ટરનેટ પ્રોટોકોલ સંસ્કરણ 6 (ટીસીપી / આઈપીવી 6) વિકલ્પ.
5. અંતે, ક્લિક કરો OK to save the changes and check if the issue is resolved.
નૉૅધ: If you use multiple network connections, navigate to નેટવર્ક અને શેરિંગ કેન્દ્ર અને એડેપ્ટર બદલો settings. Right-click on the adapter and select અક્ષમ કરો. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. પ્રકાર ઉપકરણ સંચાલક in the Windows search menu and click ઓપન.
2. પર ડબલ ક્લિક કરો નેટવર્ક ઍડપ્ટર તેને વિસ્તૃત કરવા.
3. તમારા પર જમણું-ક્લિક કરો ડ્રાઈવર (દા.ત. Intel(R) ડ્યુઅલ બેન્ડ વાયરલેસ-AC 3168) અને ક્લિક કરો સુધારા ડ્રાઇવર.
4. પર ક્લિક કરો ડ્રાઇવરો માટે મારું કમ્પ્યુટર બ્રાઉઝ કરો to locate and install a driver manually.
5. પર ક્લિક કરો બ્રાઉઝર button to choose any directory and click on આગળ.
5A. The drivers will be updated to the latest version if they are not updated.
5B. જો તેઓ પહેલાથી જ અપડેટ કરેલા તબક્કામાં હોય, તો સ્ક્રીન નીચેનો સંદેશ પ્રદર્શિત કરે છે, તમારા ઉપકરણ માટે શ્રેષ્ઠ ડ્રાઇવરો પહેલેથી જ ઇન્સ્ટોલ કરેલ છે.
6. પર ક્લિક કરો બંધ કરો વિંડોમાંથી બહાર નીકળવા માટે.
7. પુનઃપ્રારંભ the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. લોંચ કરો ઉપકરણ સંચાલક from the Windows search menu.
2. પર જમણું-ક્લિક કરો ડ્રાઈવર અને પસંદ કરો અનઇન્સ્ટોલ કરો ઉપકરણ.
3. A warning prompt will be displayed on the screen. Check the box “આ ઉપકરણ માટે ડ્રાઇવર સૉફ્ટવેર કાઢી નાખો” and confirm the prompt by clicking અનઇન્સ્ટોલ કરો.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. ની મુલાકાત લો ઉત્પાદકની વેબસાઇટ.
2. શોધવા અને ડાઉનલોડ કરો the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the ડાઉનલોડ કરેલી ફાઇલ અને તેને ઇન્સ્ટોલ કરવા માટે આપેલ સૂચનાઓને અનુસરો.
આ પણ વાંચો: વિન્ડોઝ 10 પર VPN કેવી રીતે સેટ કરવું
પદ્ધતિ 10: વિન્ડોઝ અપડેટ કરો
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. દબાવો વિન્ડોઝ + આઇ કીઓ એકસાથે ખોલવા માટે સેટિંગ્સ તમારા કમ્પ્યુટર પર.
2. પસંદ કરો અપડેટ અને સુરક્ષા.
3. પસંદ કરો અપડેટ માટે ચકાસો.
4A. Click હમણાં ઇન્સ્ટોલ કરો to download and install the latest update available.
4B. If your system is already up-to-date, then it will show તમે અપ ટુ ડેટ છો સંદેશ
પદ્ધતિ 11: તાજેતરના અપડેટ્સને અનઇન્સ્ટોલ કરો
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. દબાવો અને પકડી રાખો વિન્ડોઝ + આર કીઓ એકસાથે ખોલવા માટે ચલાવો સંવાદ બોક્સ.
2. પ્રકાર appwiz.cpl અને હિટ દાખલ કરો.
3. પર ક્લિક કરો ઇન્સ્ટોલ કરેલા અપડેટ્સ જુઓ.
4. Select the most recent update and click on અનઇન્સ્ટોલ કરો.
5. Confirm the prompt, if any, and પીસી રીબુટ કરો.
આ પણ વાંચો: ફાયરફોક્સ લોડ ન થતા પૃષ્ઠોને કેવી રીતે ઠીક કરવું
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
નૉૅધ: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to સેટિંગ્સ પછી સિસ્ટમ અને વિશે. Once you have reset your network, you have to reinstall all networking software જેમ VPN ગ્રાહકો or વર્ચ્યુઅલ સ્વીચો.
1. દબાવો અને પકડી રાખો વિન્ડોઝ + I કી એકસાથે ખોલવા માટે વિન્ડોઝ સેટિંગ્સ.
2. પર ક્લિક કરો નેટવર્ક અને ઇન્ટરનેટ.
3. પર ક્લિક કરો નેટવર્ક રીસેટ હેઠળ સ્થિતિ.
4. પર ક્લિક કરીને પ્રોમ્પ્ટની પુષ્ટિ કરો હવે ફરીથી સેટ કરો.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
આગ્રહણીય:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.