Fix Computer does not start until restarted multiple times

Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.

Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.

Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.

Fix Computer does not start until restarted multiple times

Nco ntsoov tsim qhov taw tes rov qab, tsuas yog thaum muaj qee yam yuam kev.

Nco ntsoov: Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.

Txoj Kev 1: Tig Tawm Kev Pib Ua Ntej

1.Nias Windows Key + R ces ntaus tswj thiab ntaus Enter kom qhib Tswj vaj huam sib luag.

2.Kwm rau Kho vajtse thiab suab nyem rau Fais Fab Kev Xaiv.

3.Tom qab ntawd los ntawm sab laug lub qhov rais pane xaiv "Xaiv lub hwjchim nyees khawm li cas."

4.Tam sim no nyem rau ntawm "Hloov cov chaw uas tsis tam sim no."

5. Uncheck "Tig rau kev ceev ceev pib”thiab nyem rau Txuag cov kev hloov pauv.

Txoj Kev 2: Khiav Tsis Siv Neeg Kho

1.Ntxig lub Windows 10 bootable installation DVD thiab rov qab qhib koj lub PC.

2.When prompted to Nias txhua tus yuam sij rau khau raj ntawm CD lossis DVD, nias ib qho tseem ceeb mus txuas ntxiv.

3.Xaiv koj cov lus nyiam, thiab nyem Next. Nyem Kho koj lub computer nyob rau hauv qab-sab laug.

4.Ntawm xaiv ib qho screen xaiv, nyem troubleshoot.

5.Ntawm qhov teeb meem screen, nyem Advanced xaiv.

6.Ntawm qhov Advanced xaiv screen, nyem Tsis siv neeg kho lossis pib kho.

7. Tos kom txog thaum Windows Automatic/Startup Repairs ua tiav.

8.Restart thiab koj tau ua tiav Fix Computer does not start until restarted multiple times issue, yog tsis yog, txuas ntxiv mus.

Kuj, nyeem Yuav ua li cas kho Tsis Siv Neeg Kho tsis tuaj yeem kho koj lub PC.

Txoj Kev 3: Pib dua BIOS rau qhov chaw pib

1.Xaiv koj lub laptop, ces tig rau thiab ib txhij nias F2, DEL lossis F12 (nyob ntawm koj lub chaw tsim khoom) nkag mus rau hauv Kev teeb tsa BIOS.

2.Now you’ll need to find the reset option to load lub default configuration thiab tej zaum nws yuav raug hu ua Reset to default, Load factory defaults, Clear BIOS settings, Load setup defaults, or something similar.

3.Select it with your arrow keys, press Enter, and confirm the operation. Your BIOS tam sim no yuav siv nws chaw pib.

4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.

Method 4: Check if hard disk is failing

In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.

Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.

Txoj Kev 5: Tshawb xyuas Kev Siv Hluav Taws Xob

A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Method 6: Replace CMOS battery

If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.

Txoj Kev 7: ATX Resetting

Nco ntsoov: Cov txheej txheem no feem ntau siv rau cov khoos phis tawj, yog li yog tias koj muaj lub khoos phis tawj ces tawm ntawm txoj kev no.

1.Power off your laptop then remove the power cord, leave it for few minutes.

2. Tam sim no tshem tawm cov roj teeb los ntawm qab thiab nias & tuav lub hwj chim khawm rau 15-20 vib nas this.

Nco ntsoov: Tsis txhob txuas lub hwj chim qaum xwb, peb yuav qhia koj thaum twg yuav ua li ntawd.

3.Now plug in koj zog kab (cov roj teeb yuav tsum tsis txhob muab tso) thiab sim booting koj lub laptop.

4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.

If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.

Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.

pom zoo:

Qhov ntawd yog nws koj tau ua tiav Fix Computer does not start until restarted multiple times issue tab sis yog tias koj tseem muaj lus nug txog phau ntawv qhia no ces xav nug lawv hauv cov lus qhia.