Veljače 6, 2018

Fix Computer does not start until restarted multiple times

Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.

Fix Computer does not start until restarted multiple times

Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.

Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.

Fix Computer does not start until restarted multiple times

Obavezno stvorite točku vraćanja, za slučaj da nešto pođe po zlu.

Bilješka: Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.

Metoda 1: Isključite brzo pokretanje

1.Press Windows Key + R then type control and hit Enter to open Upravljačka ploča.

upravljačka ploča

2.Kliknite na Hardver i zvuk zatim kliknite na Power Options.

opcije napajanja na upravljačkoj ploči

3. Zatim u lijevom oknu prozora odaberite "Odaberite što tipke napajanja rade."

odaberite što gumbi za uključivanje rade usb nije prepoznat popraviti

4. Sada kliknite na "Promijenite postavke koje trenutačno nisu dostupne."

promijeniti postavke koje trenutno nisu dostupne

5.Uncheck “Uključite brzo pokretanje” i kliknite Spremi promjene.

Poništite opciju Uključi brzo pokretanje

Metoda 2: Pokrenite Automatic Repair

1.Umetnite instalacijski DVD za pokretanje sustava Windows 10 i ponovno pokrenite računalo.

2.When prompted to Pritisnite bilo koju tipku za pokretanje s CD-a ili DVD-a pritisnite bilo koju tipku za nastavak.

Pritisnite bilo koju tipku za podizanje sustava s CD-a ili DVD-a

3. Odaberite svoje jezične postavke i kliknite Dalje. Pritisnite Popravi svoje računalo u donjem lijevom kutu.

Popravak računala

4. Kliknite na zaslonu za odabir opcije Otklanjanje.

Odaberite opciju kod automatskog popravka pri pokretanju sustava Windows 10

5. Na zaslonu za rješavanje problema kliknite Napredna opcija.

odaberite naprednu opciju na zaslonu za rješavanje problema

6. Na zaslonu s naprednim opcijama kliknite Automatski popravak ili popravak pri pokretanju.

pokrenuti automatski popravak

7.Pričekajte do Automatski/popravci pri pokretanju sustava Windows potpuna.

8. Ponovno pokrenite i uspjeli ste Fix Computer does not start until restarted multiple times issue, ako ne, nastavi.

Također, pročitajte Kako popraviti Automatski popravak nije mogao popraviti vaše računalo.

Metoda 3: Vratite BIOS na zadane postavke

1. Isključite prijenosno računalo, a zatim ga uključite i istovremeno pritisnite F2, DEL ili F12 (ovisno o vašem proizvođaču) za ulazak Postavljanje BIOS-a.

pritisnite tipku DEL ili F2 za ulazak u BIOS Setup

2.Now you’ll need to find the reset option to učitati zadanu konfiguraciju i može se zvati kao Reset to default, Load factory defaults, Clear BIOS settings, Load setup defaults, ili nešto slično.

učitajte zadanu konfiguraciju u BIOS-u

3.Select it with your arrow keys, press Enter, and confirm the operation. Your BIOS sada će koristiti svoje zadane postavke.

4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.

Method 4: Check if hard disk is failing

In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.

Provjerite je li tvrdi disk računala pravilno spojen

Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.

Metoda 5: Provjerite napajanje

A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

Neispravno napajanje

If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Method 6: Replace CMOS battery

If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.

Metoda 7: Resetiranje ATX-a

Bilješka: Ovaj se postupak općenito odnosi na prijenosna računala, pa ako imate računalo, ostavite ovu metodu.

1.Power off your laptop then remove the power cord, leave it for few minutes.

2. Sada izvadite bateriju odostraga i pritisnite i držite tipku za napajanje 15-20 sekundi.

isključite bateriju

Bilješka: Nemojte još spajati kabel za napajanje, reći ćemo vam kada to učiniti.

3.Now plug in vaš kabel za napajanje (baterija ne bi trebala biti umetnuta) i pokušavate pokrenuti prijenosno računalo.

4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.

If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.

Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.

Preporučena:

To je to što uspješno imate Fix Computer does not start until restarted multiple times issue ali ako još uvijek imate bilo kakvih pitanja u vezi s ovim vodičem, slobodno ih postavite u odjeljku za komentare.