Fevriye 6, 2018

Fix Computer does not start until restarted multiple times

Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.

Fix Computer does not start until restarted multiple times

Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.

Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.

Fix Computer does not start until restarted multiple times

Asire w ke ou kreye yon pwen restore, jis nan ka yon bagay ale mal.

Remak: Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.

Metòd 1: Etenn demaraj rapid

1.Press Windows Key + R then type control and hit Enter to open Kontwòl Panel.

panèl kontwòl

2. Klike sou Materyèl ak son Lè sa a, klike sou Opsyon pouvwa.

opsyon pouvwa nan panèl kontwòl

3.Lè sa a, soti nan fenèt gòch la chwazi "Chwazi sa ki bouton sa yo pouvwa fè."

chwazi kisa bouton pouvwa yo fè usb pa rekonèt ranje

4.Kounye a klike sou "Chanje anviwònman ki disponib kounye a."

chanje paramèt ki pa disponib kounye a

5.Uncheck “Vire sou demaraj vit” epi klike sou Save chanjman yo.

Dezaktive Vire sou demaraj rapid

Metòd 2: Kouri Otomatik Reparasyon

1.Mete DVD enstalasyon demaraj Windows 10 la ak rekòmanse PC ou.

2.When prompted to Peze nenpòt ki kle pou demare nan CD oswa DVD, peze nenpòt kle pou kontinye.

Peze nenpòt ki kle bòt soti nan CD oswa DVD

3. Chwazi preferans lang ou, epi klike sou Next. Klike sou Reparasyon òdinatè w lan nan anba-gòch la.

Repare òdinatè w lan

4.On chwazi yon ekran opsyon, klike sou Rézoudr.

Chwazi yon opsyon nan reparasyon demaraj otomatik Windows 10

5.On Depanaj ekran, klike sou Opsyon avanse.

chwazi opsyon avanse nan ekran depanaj

6.Nan ekran Opsyon Avanse a, klike sou Reparasyon otomatik oswa reparasyon demaraj.

kouri reparasyon otomatik

7.Wait jiskaske la Windows Otomatik/Demaraj Reparasyon konplè.

8.Rekòmanse epi ou gen siksè Fix Computer does not start until restarted multiple times issue, si non, kontinye.

Epitou, li Ki jan yo ranje Reparasyon Otomatik pa t 'kapab repare PC ou.

Metòd 3: Reyajiste BIOS nan paramèt default yo

1.Turn off your laptop, then turn it on and simultaneously peze F2, DEL oswa F12 (depann sou manifakti ou) antre nan BIOS konfigirasyon.

peze DEL oswa F2 kle pou antre nan BIOS Setup

2.Now you’ll need to find the reset option to chaje konfigirasyon default la epi yo ka nonmen li kòm Reyajiste nan default, Chaje default faktori, Klè paramèt BIOS, Chaje konfigirasyon default, oswa yon bagay ki sanble.

chaje konfigirasyon default la nan BIOS

3.Select it with your arrow keys, press Enter, and confirm the operation. Your Byografi pral kounye a sèvi ak li yo anviwònman default.

4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.

Method 4: Check if hard disk is failing

In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.

Tcheke si Disk di òdinatè a byen konekte

Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.

Metòd 5: Tcheke ekipman pou pouvwa

A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

Defo ekipman pou pouvwa

If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Method 6: Replace CMOS battery

If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.

Metòd 7: ATX Reyajiste

Remak: Pwosesis sa a jeneralman aplike nan laptops, kidonk si ou gen yon òdinatè Lè sa a, kite metòd sa a.

1.Power off your laptop then remove the power cord, leave it for few minutes.

2.Kounye a retire batri a soti dèyè epi peze epi kenbe bouton pouvwa a pou 15-20 segonn.

deploge batri ou

Remak: Pa konekte kòd pouvwa a jis ankò, nou pral di w ki lè fè sa.

3.Now plug in kòd kouran w (batri pa ta dwe mete) epi eseye demaraj laptop ou.

4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.

If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.

Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.

Rekòmande:

Se sa ou genyen avèk siksè Fix Computer does not start until restarted multiple times issue men si ou toujou gen nenpòt kesyon konsènan gid sa a Lè sa a, ou lib pou mande yo nan seksyon kòmantè a.