Thread Stuck In Device Driver Error in Windows 10 [SOLVED]
Thread Stuck In Device Driver Error in Windows 10 is a BSOD (Blue Screen Of Death) error which is caused by a driver file caught in an endless loop. The stop error code is 0x000000EA and as the error, itself suggests it’s the device driver issue rather than a hardware problem.
Anyway, the fix for the error is simple, update the drivers or BIOS and the problem is resolved in all most all the cases. If you can’t boot into Windows to perform the below-listed steps then boot your computer into safe mode using the installation media.
Depending on your PC you may receive one of the following errors:
- THREAD_STUCK_IN_DEVICE_DRIVER
- STOP Error 0xEA: THREAD_STUCK_IN_DEVICE_DRIVER
- The THREAD_STUCK_IN_DEVICE_DRIVER bug check has a value of 0x000000EA.
Few of the cause which can lead to Thread Stuck In Device Driver error are:
- Corrupt or old device drivers
- Konfli chofè apre enstale nouvo pyès ki nan konpitè.
- Error 0xEA blue screen caused by a damaged video card.
- Old BIOS
- Bad Memory
Thread Stuck In Device Driver Error in Windows 10 [SOLVED]
Se konsa, san yo pa gaspiye nenpòt ki lè ann wè ki jan Fix Thread Stuck In Device Driver Error in Windows 10 avèk èd gid depanaj ki nan lis anba a.
Metòd 1: Mete ajou chofè kat grafik yo
If you’re facing the Thread Stuck In Device Driver Error in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face issues such as screen flickering, screen turning on/off, display not working correctly, etc you may need to update your graphics card drivers in order to fix the underlying cause. If you face any such issues then you can easily update graphics card drivers with the help of this guide.
Metòd 2: Enfim akselerasyon Materyèl
1. Peze Windows Key + I pou louvri Anviwònman Lè sa a, klike sou Sistèm.
2. From the left-hand side menu, select Display. Now at the bottom of the Display window, click on the Advanced display settings.
3. Koulye a, ale nan the Troubleshoot tab epi klike sou Chanje Anviwònman.
4. Trennen a Hardware Acceleration slider a Okenn
5. Click Ok then Apply and restart your PC.
6. If you don’t have the troubleshoot tab then right-click on the desktop and select NVIDIA Kontwòl Panel (Every graphic card has their own control panel).
7. From the NVIDIA Control Panel, select “Set PhysX configuration” from the left column.
8. Next, under select, a PhysX processor make sure the CPU is selected.
9. Click Apply to save the changes. This will disable NVIDIA PhysX GPU acceleration.
10. Rdemare PC ou ak wè si w ap kapab fix thread stuck in device driver error in Windows 10, if not, continue.
Method 3: Run SFC and DISM tool
1. Peze Windows Key + X Lè sa a, klike sou Kòmandman èd (Admin).
2. Koulye a, tape sa ki annapre yo nan cmd la epi frape antre:
Sfc / scannow
3. Tann pou pwosesis ki anwo a fini ak yon fwa fè rekòmanse PC ou.
4. If you are able to fix Thread Stuck in device driver error in Windows 10 issue then great, if not then continue.
5. Ankò louvri cmd epi tape lòd sa a epi frape antre apre chak youn:
Dism /Online /Cleanup-Image /CheckHealth Dism /Online /Cleanup-Image /ScanHealth Dism /Online /Cleanup-Image /RestoreHealth
6. Kite kòmandman DISM la kouri epi tann li fini.
7. If the above command doesn’t work then try on the below:
Dism /Image:C:offline /Cleanup-Image /RestoreHealth /Source:c:testmountwindows Dism /Online /Cleanup-Image /RestoreHealth /Source:c:testmountwindows /LimitAccess
Remak: Ranplase C:RepairSourceWindows la ak kote sous reparasyon ou a (Windows Enstalasyon oswa Disk Rekiperasyon).
7. Rdemare PC ou pou konsève pou chanjman yo.
Method 4: Perform Windows update
Sometimes pending Windows update can cause a problem with the drivers, hence it’s recommended to update Windows.
1. Peze Windows Key+ Mwen louvri Anviwònman Lè sa a, klike sou Mizajou & Sekirite Sosyal.
2. From the left-hand side, menu click on Windows Update.
3. Koulye a, klike sou "Tcheke pou mizajou” bouton pou tcheke nenpòt mizajou ki disponib.
4. If any updates are pending then click on Telechaje & Enstale mizajou.
5. Once the updates are downloaded, install them and your Windows will become up-to-date.
6. After the updates are installed reboot your PC to save changes.
Method 5: Run Windows 10 BSOD Troubleshooter
If you are using Windows 10 Creators update or later, you can use Windows inbuilt Troubleshooter to fix Blue Screen of Death Error (BSOD).
1. Press Windows key + I to open Settings then click on ‘Mizajou & Sekirite Sosyal'.
2. From the left pane, select ‘Rézoudr'.
3. Scroll down to 'Jwenn ak ranje lòt pwoblèm' seksyon.
4. Klike sou 'Blue Screen' epi klike sou 'Kouri rézèsisè a'.
Method 6: Give Graphics Card Access to the Application
1. Peze Windows Key + I pou ouvri Anviwònman Lè sa a, klike sou Sistèm.
2. Nan meni gòch la chwazi Display Lè sa a, klike sou Graphics settings link anba.
3. Select the type of app, if you can’t find your app or game in the list then select the Aplikasyon klasik and then use the “Browse"Opsyon.
4. Navigate to your application or game, chwazi li, epi klike Louvri.
5. Once the app is added to the list, click on it then again click on Opsyon.
NAN. Chwazi "Segondè pèfòmans” and click on Save.
7. Rdemare PC ou pou konsève pou chanjman yo.
Method 7: Update BIOS (Basic Input/Output System)
nòt
Performing BIOS update is a critical task and if something goes wrong it can seriously damage your system, therefore, expert supervision is recommended.
BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10. Sometimes, the older BIOS doesn’t support new features and that is why you can face the Thread Stuck in device driver error. In order to fix resolve the underlying issue, you need to update BIOS using this guide.
Method 8: Reset Overclocking Settings
If you’re overclocking your PC then this might explains why you’re facing the Thread Stuck in device driver error, as this overclocking software puts a strain on your PC hardware which is why PC restarts unexpectedly giving the BSOD error. To fix this issue simply reset the overclocking settings or remove any overclocking software.
Method 9: Faulty GPU
Chances are the GPU installed on your system might be faulty, so one way to check this is to remove the dedicated graphic card and leave the system with only integrated one and see if the issue is resolved or not. If the issue is resolved then your GPU is faulty and you need to replace it with a new one but before that, you could try cleaning your graphic card and again place it in the motherboard to see it’s working or not.
Metòd 10: Tcheke ekipman pou pouvwa
A faulty or failing Power Supply is generally the cause for the Bluescreen of death errors. Because the power consumption of hard disk is not met, it won’t get enough power to run, and subsequently, you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.
If you have recently installed new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporarily remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.
Se sa ou genyen avèk siksè Fix Thread Stuck In Device Driver Error in Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.