Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Thread Stuck In Device Driver Error in Windows 10 is a BSOD (Blue Screen Of Death) error which is caused by a driver file caught in an endless loop. The stop error code is 0x000000EA and as the error, itself suggests it’s the device driver issue rather than a hardware problem.

Anyway, the fix for the error is simple, update the drivers or BIOS and the problem is resolved in all most all the cases. If you can’t boot into Windows to perform the below-listed steps then boot your computer into safe mode using the installation media.

Depending on your PC you may receive one of the following errors:

• THREAD_STUCK_IN_DEVICE_DRIVER
• STOP Error 0xEA: THREAD_STUCK_IN_DEVICE_DRIVER
• The THREAD_STUCK_IN_DEVICE_DRIVER bug check has a value of 0x000000EA.

Few of the cause which can lead to Thread Stuck In Device Driver error are:

• Corrupt or old device drivers
• Illesztőprogram-ütközés új hardver telepítése után.
• Error 0xEA blue screen caused by a damaged video card.
• Old BIOS
• Bad Memory

Thread Stuck In Device Driver Error in Windows 10 [SOLVED]

Tehát időveszteség nélkül nézzük meg, hogyan Fix Thread Stuck In Device Driver Error in Windows 10 az alábbi hibaelhárítási útmutató segítségével.

1. módszer: Frissítse a grafikus kártya illesztőprogramjait

If you’re facing the Thread Stuck In Device Driver Error in Windows 10 then the most probable cause for this error is corrupted or outdated Graphics card driver. When you update Windows or install a third-party app then it can corrupt the video drivers of your system. If you face issues such as screen flickering, screen turning on/off, display not working correctly, etc you may need to update your graphics card drivers in order to fix the underlying cause. If you face any such issues then you can easily update graphics card drivers with the help of this guide.

2. módszer: A hardveres gyorsítás letiltása

1. Nyomja meg a Windows Key + I billentyűket a megnyitáshoz beállítások majd kattintson a gombra Rendszer. 

2. From the left-hand side menu, select kijelző. Now at the bottom of the Display window, click on the Advanced display settings.

3. Most menj a the Troubleshoot tab és kattintson Beállítások megváltoztatása.

4. Húzza a Hardware Acceleration slider a Nincsre

5. Click Ok then Apply and restart your PC.

6. If you don’t have the troubleshoot tab then right-click on the desktop and select NVIDIA Vezérlőpult (Every graphic card has their own control panel).

7. From the NVIDIA Control Panel, select “Set PhysX configuration” from the left column.

8. Next, under select, a PhysX processor make sure the CPU is selected.

9. Click Apply to save the changes. This will disable NVIDIA PhysX GPU acceleration.

10. Indítsa újra a számítógépet, és ellenőrizze, hogy képes-e rá fix thread stuck in device driver error in Windows 10, if not, continue.

Method 3: Run SFC and DISM tool

1. Nyomja meg a Windows Key + X billentyűket, majd kattintson a gombra Parancssor (Adminisztrátor).

2. Most írja be a következőket a cmd-be, és nyomja meg az Enter billentyűt:

Sfc / scannow

3. Várja meg, amíg a fenti folyamat befejeződik, majd indítsa újra a számítógépet.

4. If you are able to fix Thread Stuck in device driver error in Windows 10 issue then great, if not then continue.

5. Nyissa meg ismét a cmd-t, írja be a következő parancsot, és mindegyik után nyomja meg az Enter billentyűt:

Dism /Online /Cleanup-Image /CheckHealth Dism /Online /Cleanup-Image /ScanHealth Dism /Online /Cleanup-Image /RestoreHealth

6. Hagyja futni a DISM parancsot, és várja meg, amíg befejeződik.

7.  If the above command doesn’t work then try on the below:

Dism /Image:C:offline /Cleanup-Image /RestoreHealth /Source:c:testmountwindows Dism /Online /Cleanup-Image /RestoreHealth /Source:c:testmountwindows /LimitAccess

Jegyzet: Cserélje ki a C:RepairSourceWindows fájlt a javítási forrás helyére (Windows telepítő vagy helyreállító lemez).

7. A változtatások mentéséhez indítsa újra a számítógépet.

Method 4: Perform Windows update

Sometimes pending Windows update can cause a problem with the drivers, hence it’s recommended to update Windows.

1. nyomja meg Windows Key+ A Beállítások megnyitásához kattintson a gombra Frissítés és biztonság.

2. A bal oldali menüben kattintson a gombra Windows Update.

3. Most kattintson a „Frissítések ellenőrzése” gombot az elérhető frissítések ellenőrzéséhez.

4. Ha van függőben lévő frissítés, kattintson a gombra Frissítések letöltése és telepítése.

5. Miután letöltötte a frissítéseket, telepítse őket, és a Windows naprakész lesz.

6. After the updates are installed reboot your PC to save changes.

Method 5: Run Windows 10 BSOD Troubleshooter

If you are using Windows 10 Creators update or later, you can use Windows inbuilt Troubleshooter to fix Blue Screen of Death Error (BSOD).

1. Press Windows key + I to open Settings then click on ‘Frissítés és biztonság".

2. From the left pane, select ‘Elhárítása".

3. Görgessen le a "Keressen és javítson ki más problémákat' szakaszok.

4. Kattintson a 'kék képernyő'és kattintson a'Futtassa a hibaelhárítót".

Method 6: Give Graphics Card Access to the Application

1. Nyomja meg a Windows Key + I billentyűket a Beállítások megnyitásához, majd kattintson a gombra Rendszer.

2. A bal oldali menüből válassza ki a lehetőséget kijelző majd kattintson a gombra Graphics settings link az alján.

3. Select the type of app, if you can’t find your app or game in the list then select the Klasszikus alkalmazás and then use the “Tallózás" választási lehetőség.

4. Navigate to your application or game, válassza ki, és kattintson a gombra Nyissa meg.

5. Once the app is added to the list, click on it then again click on Lehetőségeket.

6. Válassza a „Nagy teljesítményű” and click on Save.

7. A változtatások mentéséhez indítsa újra a számítógépet.

Method 7: Update BIOS (Basic Input/Output System)

BIOS stands for Basic Input and Output System and it is a piece of software present inside a small memory chip on the PC’s motherboard which initializes all the other devices on your PC, like the CPU, GPU, etc. It acts as an interface between the computer’s hardware and its operating system such as Windows 10. Sometimes, the older BIOS doesn’t support new features and that is why you can face the Thread Stuck in device driver error. In order to fix resolve the underlying issue, you need to update BIOS using this guide.

Method 8: Reset Overclocking Settings

If you’re overclocking your PC then this might explains why you’re facing the Thread Stuck in device driver error, as this overclocking software puts a strain on your PC hardware which is why PC restarts unexpectedly giving the BSOD error. To fix this issue simply reset the overclocking settings or remove any overclocking software.

Method 9: Faulty GPU

Chances are the GPU installed on your system might be faulty, so one way to check this is to remove the dedicated graphic card and leave the system with only integrated one and see if the issue is resolved or not. If the issue is resolved then your GPU is faulty and you need to replace it with a new one but before that, you could try cleaning your graphic card and again place it in the motherboard to see it’s working or not.

10. módszer: Ellenőrizze a tápegységet

A faulty or failing Power Supply is generally the cause for the Bluescreen of death errors. Because the power consumption of hard disk is not met, it won’t get enough power to run, and subsequently, you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

If you have recently installed new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporarily remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Ez az, ami sikeresen megvan Fix Thread Stuck In Device Driver Error in Windows 10 but if you still have any queries regarding this post then feel free to ask them in the comment’s section.