Fix Computer does not start until restarted multiple times

Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.

Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.

Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.

Fix Computer does not start until restarted multiple times

Jide n'aka na ịmepụta ebe weghachi, ọ bụrụ na ihe na-aga na-ezighị ezi.

Cheta na: Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.

Usoro 1: Gbanyụọ mmalite ngwa ngwa

1.Pịa Windows Key + R wee pịnye njikwa wee kụọ Tinye ka imeghe Ogwe njikwa.

2. Tinye na Ngwaọrụ na ụda wee pịa Nhọrọ Nhọrọ.

3. Mgbe ahụ, si n'aka ekpe window pane họrọ "Họrọ ihe akara bọtịnụ na-eme."

4. Ugbu a pịa "Gbanwee ntọala ndị na-adịghị adị ugbu a."

5. Wepụ"Mee ngwa ngwa” wee pịa Chekwa mgbanwe.

Usoro 2: Gbaa mmezi akpaaka

1.Tinye Windows 10 DVD nwụnye bootable ma malitegharịa PC gị.

2.When prompted to Pịa igodo ọ bụla iji buo na CD ma ọ bụ DVD, pịa igodo ọ bụla ka ịga n'ihu.

3.Họrọ mmasị asụsụ gị, wee pịa Ọzọ. Pịa Mmezi kọmputa gị na ala-aka ekpe.

4.On họrọ ihuenyo nhọrọ, pịa troubleshoot.

5.On Troubleshoot ihuenyo, pịa Nhọrọ dị elu.

6.On Advanced nhọrọ ihuenyo, pịa Ndozi akpaaka ma ọ bụ mmezi mmalite.

7.Chere ruo na Mmezi Windows akpaaka/mmalite zuru ezu.

8.Malitegharịa ekwentị na ị na-aga nke ọma Fix Computer does not start until restarted multiple times issue, ọ bụrụ na ọ bụghị, gaa n'ihu.

Ọzọkwa, gụọ Otu esi edozi mmezi akpaaka enweghị ike ịrụkwa PC gị.

Usoro 3: Tọgharịa BIOS na ntọala ndabara

1. Gbanyụọ laptọọpụ gị, wee gbanye ya na n'out oge Pịa F2, DEL ma ọ bụ F12 (dabere na onye nrụpụta gị) ịbanye Ntọala BIOS.

2.Now you’ll need to find the reset option to buo nhazi nke ndabara na enwere ike ịkpọ ya dị ka Tọgharia na ndabara, Ibu ọrụ mmepụta ihe, Kpochapụ ntọala BIOS, ntọlite ​​ntọlite ​​​​ibu, ma ọ bụ ihe yiri ya.

3.Select it with your arrow keys, press Enter, and confirm the operation. Your BIOS ga-eji ya ugbu a ndabara ntọala.

4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.

Method 4: Check if hard disk is failing

In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.

Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.

Usoro 5: Lelee ike na-enye

A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Method 6: Replace CMOS battery

If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.

Usoro 7: Ntọgharị ATX

Cheta na: Usoro a na-emetụtakarị laptọọpụ, yabụ ọ bụrụ na ị nwere kọmpụta hapụ usoro a.

1.Power off your laptop then remove the power cord, leave it for few minutes.

2.Ugbu a wepụ batrị site n'azụ wee pịa & jide bọtịnụ ike maka 15-20 sekọnd.

Cheta na: Ejikọla eriri ọkụ ahụ, anyị ga-agwa gị mgbe ịme nke ahụ.

3.Now plug in eriri ike gị (e kwesịghị itinye batrị) ma na-agbalị ịkwalite laptọọpụ gị.

4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.

If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.

Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.

-atụ aro:

Nke ahụ bụ nke ị nwetara nke ọma Fix Computer does not start until restarted multiple times issue ma ọ bụrụ na ị ka nwere ajụjụ ọ bụla gbasara ntuziaka a, nweere onwe gị ịjụ ha na ngalaba nkọwa.