Fix External Hard Drive Not Showing Up or Recognized: External hard drives are very useful when you want to increase storage space. They enable you to store data at a place other than your computer’s primary storage and that too at a relatively lower cost. They are easy to use. But, sometimes it may occur that even after connecting your external hard drive to your computer, it doesn’t show up or get recognized. There can be various reasons for your external hard drive not showing up like dead USB ports or driver issues. If your computer fails to detect your external hard drive, here’s what you need to do.
Before you move on to the following methods, you must first ensure that your drive’s power switch is on (if it exists). The lights on the device will indicate that. While most of the external drives are powered over USB itself, some may have a separate power cable. In such a case, you must ensure that the power cable is working fine. If it isn’t working, the power cable or your power outlet may be damaged. If you have checked all of this and your drive doesn’t show up, continue following the given steps.
Fix External Hard Drive Not Showing Up or Recognized
혹시라도 문제가 생길 경우를 대비해 복원 지점을 만들어 두시기 바랍니다.
Method 1 – Try Using a Different USB Port Or Computer
Try inserting your hard drive in some other USB port to check if there’s an issue with the USB port itself. If your external hard drive shows up on inserting it in another USB port, then your previous USB port may be dead.
Also, try inserting your hard drive on some other computer. If it doesn’t show up on the other computer as well, there may be a problem with the hard drive. It may even be completely dead and you might need to replace it. This way you will know where exactly the problem lies.
Method 2 – Run Hardware and Devices Troubleshooter
The Windows inbuilt troubleshooter may handle this for you by checking and fixing any hardware or USB related issues, so this one is the foremost step. To let Windows troubleshoot this problem,
1.검색 문제 해결 in the Windows search field and then click on it. Alternatively, you can access it in the Settings.
2.Scroll down to ‘하드웨어 및 장치’를 클릭하고 클릭하세요.
3. '를 클릭하세요.문제 해결사 실행’ under Hardware and Devices.
Method 3 – Enable the External Drive If It Isn’t Already
If your external hard drive like WD My Passport Ultra is not showing up or recognized then it may be caused because it is disabled on your computer. You should ensure that your hard drive is enabled by:
1. 누르기 Windows 키 + R 열 수 운영.
2. ''를 입력하세요.devmgmt.msc를’ and click on OK.
3.In the device management window, double click on the type of your external hard drive. It may be located under ‘디스크 드라이브'또는'범용 직렬 버스 컨트롤러'.
4.Double-click on your external hard drive to open its 속성.
5.Now, if you see the ‘기기 사용 중지’ button, then it means the hard disk is already enabled.
6.But if you see ‘기기 사용 설정’ button, then make sure to click on it in order to enable the external hard drive.
Method 4 – Update External Hard Drive Drivers
경우 drivers for hard drives are outdated or missing, it can lead to the external hard drive not showing up or recognized. Therefore, you must make sure that the drivers are updated. You can update the drivers manually by searching for the latest version online and downloading them to your computer. For this, you need to gather the required knowledge.
1. 누르기 Windows 키 + R 다음을 입력하십시오. devmgmt.msc를 and Enter to open Device Manager.
2.확장 디스크 드라이브 or 범용 직렬 버스 컨트롤러.
3.Now right-click on your External hard drive and select 드라이버 업데이트.
4.Choose the option “업데이트 된 드라이버 소프트웨어 자동 검색".
5.This will automatically look for and install the updated driver of the hardware from the internet.
6.If the above steps were helpful in fixing the issue then very good, if not then continue.
7.Again right-click on your external hard drive and select “드라이버 업데이트” 하지만 이번에는 다음 화면에서 “내 컴퓨터에서 드라이버 소프트웨어 찾아보기."
8.이제 '를 선택하세요.컴퓨터에서 사용 가능한 드라이버 목록에서 선택하겠습니다.. "
9. 마지막으로 select the latest driver 목록에서 다음.
10.Let the above process finish and restart your PC to save changes.
Method 5 – Create Partitions for your External Drive
If you are connecting your hard drive for the first time, then it is possible that it does not show up because it doesn’t have any partitions. For a previously used hard drive too, partition issues may cause it to not be detected. To partition your drive,
1. 누르기 Windows 키 + R 실행을 엽니 다.
2. ''를 입력하세요.diskmgmt.msc를’ and click on OK.
3.In the disk management window, right-click on the hard drive and select ‘새로운 단순 볼륨'.
4.To complete the process follow this guide.
5.Restart your computer and check if you’re able to fix external hard drive not showing up or recognized issue.
Method 6 – Set Or Change the Drive Letter
Once your drive is correctly partitioned, you must assign a drive letter in order to detect your external hard drive. For this,
1. 누르기 Windows 키 + R 실행을 엽니 다.
2. ''를 입력하세요.diskmgmt.msc를’ and click on OK.
3.In the Disk Management window, 마우스 오른쪽 단추로 클릭 on the drive that you want to assign a drive letter.
4. '를 클릭하세요.드라이브 문자 및 경로 변경'.
5.If your drive doesn’t have a drive letter already, click on ‘추가’. Otherwise, click on ‘변화’ to change the drive letter.
6.Select ‘다음 드라이브 문자를 할당’ radio button.
7.Choose a new letter you want to assign from the drop-down menu and click on Ok.
8.Disconnect and re-insert your external hard drive and check if your external hard drive is now recognized or not.
Method 7 – Format the External Hard Drive
If your drive is partitioned and still does not show up, it may be because it was partitioned or formatted earlier using a different file system or OS and the Windows can’t understand it. To format the drive,
1.Press Windows key + R to open Run then type 'diskmgmt.msc’ Enter를 누르십시오.
2.In the disk management window, right-click on the hard drive and select ‘형성'.
참고 : This will erase all the contents of the drive. You may need to back up your files using the system which the drive was partitioned in.
3.Type any name which you want to give your drive under Volume label field.
4.Select the file systems from FAT, FAT32, exFAT, NTFS, or ReFS, according to your use.
5.지금부터 할당 단위 크기 (Cluster size) drop-down make sure to select Default.
6.Check or uncheck “빠른 포맷 수행” options depending on whether you want to do a quick format or full format.
7.Next, check or uncheck “파일 및 폴더 압축 활성화” option according to your preference.
8.Finally, review all your choices and then click OK 다시 클릭 OK 당신의 행동을 확인합니다.
9.Once the Format is complete, you can close Disk Management.
This should definitely fix external hard drive not showing up issue, but if for some reason you’re stuck then follow the next method.
방법 8 - USB 선택적 일시 중단 설정 비활성화
1.Search for ‘전원 계획 편집’ in the search field located on your taskbar and open it.
2. '를 클릭하세요.고급 전원 관리 옵션 설정 변경을'.
3.Under USB settings, disable ‘USB 선택적 일시 중단 설정'.
4.Click OK followed by Apply to save changes.
5.Reinsert your hard drive and this time it will show up without any issue.
권장 사항 :
이 기사가 도움이 되었기를 바랍니다. 이제 쉽게 할 수 있습니다. Fix External Hard Drive Not Showing Up or Recognized, 하지만 이 튜토리얼에 관해 여전히 질문이 있는 경우 댓글 섹션에서 자유롭게 질문하세요.