Fix Bad Pool Caller Error (BAD_POOL_CALLER)

The Bad Pool Caller error is the Blue screen of Death (BSOD) error, which occurs because of the outdated or corrupt driver installation. In many cases, the new hardware or software you might have recently installed can also cause this error.

Causes of Bad Pool Caller Error (BAD_POOL_CALLER):

• Because of a damaged hard disk.
• Outdated, corrupt, or old device drivers.
• 바이러스 또는 맬웨어.
• Corrupt registry information.
• Damaged or corrupt memory issues.

Some simple miscellaneous fixes to try:

Well, there can be two cases, which are: either you can boot to Windows or you can’t; if you can’t, then follow this post here to enable the legacy advanced boot menu to boot into safe mode.

Fix Bad Pool Caller Error (BAD_POOL_CALLER):

Method 1: Run System File Checker and Check Disk

1. 에서 Advanced boot menu, boot your PC into safe mode.

2. In safe mode, press Windows key + X and click on 명령 프롬프트(관리자).

3. Type the following commands into the cmd and hit enter after each one:

sfc /scannow chkdsk /f C:

4. Once they are completed, exit the command prompt.

5. Next type of memory in the Windows search bar and select “Windows 메모리 진단."

6. 표시된 옵션 세트에서 "지금 다시 시작하고 문제가 있는지 확인하십시오.. "

7. After which Windows will reboot to check for possible memory errors and will hopefully diagnose the possible reasons as for why you get the 죽음의 블루 스크린 (BSOD) 에러 메시지.

8. Restart your PC and check if the problem is resolved or not.

Method 2: Run Memtest86

Now run the Memtest86, a 3rd party software, but it eliminates all the possible exceptions of memory errors as it runs outside of the Windows environment.

참고 : Before starting, make sure you have access to another computer as you will need to download and burn the software to the disc or USB flash drive. It’s best to leave the computer overnight when running a Memtest as it is likely to take some time.

1. USB 플래시 드라이브를 시스템에 연결합니다.

2. 다운로드 및 설치 Windows Memtest86 USB 키 자동 설치 프로그램.

3. Right-click on the image file which you just downloaded and selected the “여기에 추출"옵션.

4. 압축이 풀린 후 폴더를 열고 다음을 실행하세요. Memtest86+ USB 설치 프로그램.

5. Choose you’re plugged USB drive to burn the MemTest86 software (This will format your USB drive).

6. Once the above process is finished, insert the USB to the PC, which is giving the Bad Pool Caller Error (BAD_POOL_CALLER).

7. PC를 다시 시작하고 USB 플래시 드라이브에서 부팅이 선택되었는지 확인하세요.

8. Memtest86은 시스템의 메모리 손상 테스트를 시작합니다.

9. If you have passed all the tests, you can be sure that your memory is working correctly.

10. 일부 단계가 실패한 경우 Memtest86 will find memory corruption, which means that your BAD_POOL_CALLER blue screen of death error is because of bad/corrupt memory.

11.하기 위해 fix a bad pool caller error, 불량 메모리 섹터가 발견되면 RAM을 교체해야 합니다.

Method 3: Run Driver Verifier

이 방법은 안전 모드가 아닌 Windows에 정상적으로 로그인할 수 있는 경우에만 유용합니다. 다음으로 시스템 복원 지점을 생성하십시오.

Run Driver verifier to fix Bad Pool Caller Error.

That’s it; you have successfully fix Bad Pool Caller Error (BAD_POOL_CALLER), but if you still have any questions regarding this post, feel free to ask them in the comment section, and I will be happy to assist you.