Fix Computer does not start until restarted multiple times

Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.

Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.

Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.

Fix Computer does not start until restarted multiple times

혹시라도 문제가 생길 경우를 대비해 복원 지점을 만들어 두시기 바랍니다.

참고 : Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.

방법 1: 빠른 시작 끄기

1.Press Windows Key + R then type control and hit Enter to open 제어판.

2.Click 하드웨어 및 소리 다음을 클릭하십시오 전원 옵션.

3.Then from the left window pane select “전원 단추의 기능을 선택하십시오."

4. 이제 "현재 사용할 수없는 설정을 변경하십시오."

5.Uncheck “빠른 시작 기능 켜기"를 클릭하고 변경 사항 저장을 클릭합니다.

방법 2: 자동 복구 실행

1.Windows 10 부팅 가능 설치 DVD를 넣습니다. PC를 다시 시작하십시오.

2.When prompted to 아무 키나 누르시오 CD 또는 DVD에서 부팅하려면 아무 키나 눌러 계속하십시오.

3. 언어 기본 설정을 선택하고 다음을 클릭합니다. 수리를 클릭하십시오 왼쪽 하단에 있는 컴퓨터.

4. 옵션 선택 화면에서 문제 해결.

5. 문제 해결 화면에서 고급 옵션.

6.고급 옵션 화면에서 자동 복구 또는 시동 복구.

7.기다립니다 Windows 자동/시동 복구 완전한.

8. 다시 시작하면 성공적으로 Fix Computer does not start until restarted multiple times issue, 그렇지 않다면 계속하세요.

또한 읽으십시오 자동 복구를 해결하는 방법으로 PC를 복구할 수 없습니다.

방법 3: BIOS를 기본 설정으로 재설정

1. 노트북을 껐다가 켜고 동시에 F2, DEL 또는 F12를 누릅니다. (제조업체에 따라 다름) BIOS 설정.

2. 이제 재설정 옵션을 찾아야 합니다. 기본 구성 로드 기본값으로 재설정, 공장 기본값 로드, BIOS 설정 지우기, 설정 기본값 로드 등으로 이름이 지정될 수 있습니다.

3. 화살표 키로 선택하고 Enter 키를 누른 다음 작업을 확인합니다. 당신의 바이오스 이제 사용할 것입니다 기본 설정.

4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.

Method 4: Check if hard disk is failing

In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.

Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.

방법 5: 전원 공급 장치 확인

A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Method 6: Replace CMOS battery

If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.

방법 7: ATX 재설정

참고 : 이 프로세스는 일반적으로 노트북에 적용되므로 컴퓨터가 있는 경우 이 방법을 사용하지 마세요.

1.Power off your laptop then remove the power cord, leave it for few minutes.

2.지금 배터리를 제거하다 뒤에서 전원 버튼을 15~20초 동안 길게 누르세요.

참고 : 아직 전원 코드를 연결하지 마십시오. 연결 시기를 알려드리겠습니다.

3.Now plug in 당신의 전원 코드 (배터리를 삽입하면 안 됩니다) 노트북을 부팅해 보세요.

4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.

If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.

Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.

권장 사항 :

그게 당신이 성공적으로 Fix Computer does not start until restarted multiple times issue 하지만 이 가이드에 관해 여전히 질문이 있는 경우 댓글 섹션에서 자유롭게 질문하세요.