마주하고 있다면 We couldn’t complete the updates, Undoing changes, Don’t turn off your computer message, and you are stuck in a boot loop, then you will be glad you came here because this post is going to help you fix this error.
Well, Windows 10 is the latest edition of Microsoft Operating System and like all the other OS this sure seems to have a lot of issues too. But the one which we are particularly talking about here is while downloading the new updates and restarting the PC, the update process just stuck and Windows could not start and all we are left with is this annoying error message:
We couldn't complete the updates, Undoing changes, Don't turn off your computer.
And we are just stuck in an endless loop of this error and restarting our PC doesn’t get us anywhere except back to this error. In addition to the above error after restarting several times you may start to see some progress like this:
Installing Updates 15% We couldn’t complete the updates, Undoing changes, Don’t turn off your computer Restarting
But we have a piece of bad news for you, unfortunately, this will only complete till 30% and then it will again restart and this will go on and on and on till you decide to do something about it, well you are here so I guess its time to fix this issue.
Anyway, if you are facing this error on your system, don’t worry as you can easily address the same by just following and applying the fixes from below. So without wasting any time let’s see How to Fix We couldn’t complete the updates, Undoing changes issue with the help of the below-listed troubleshooting steps.
Fix We couldn’t complete the updates, Undoing changes
알림: DO NOT, I REPEAT, DO NOT REFRESH/RESET YOUR PC.
If you are able to log on to Windows:
Method 1: Delete Software Distribution Folder
1. 프레스 Windows 키 + X 선택 명령 프롬프트 (관리자).
2. Now Type the following command inside cmd and hit enter after each one:
그만 그만 wuauserv 그물 정지 비트 net stop cryptSvc net stop msiserver
3. Now browse to the C : Windows 소프트웨어 배포 폴더 안에있는 모든 파일과 폴더를 삭제하십시오.
4. Again go to command prompt and type each of these commands and hit Enter:
net start wuauserv net start cryptSvc 순 시작 비트 net start msiserver
5. Restart your computer to save changes.
6. Again try installing the updates and this time you may be successful in installing updates.
7. If you are still facing some issues restore your PC to the date before downloading the updates.
Alternatively, whether you are able to log on to Windows or not, you should try Methods (c),(d), and (e).
Method 2: Download Windows Update Troubleshooter
1. Open your web browser and go to the 다음 페이지.
2. 클릭 "Windows 업데이트 문제 해결사를 다운로드하여 실행합니다."
3. After the file has finished downloading, double-click on it to run.
4. Click Next and let Windows Update Troubleshooter run.
5. Follow the on-screen instruction to complete the process.
6. If a problem is found, click on Apply this fix.
7. Finally, try again to install the updates and this time you won’t face We couldn’t complete the updates, Undoing changes 에러 메시지.
Method 3: Enable App Readiness
1. 프레스 Windows 키 + R 다음을 입력하십시오. services.msc를 Enter를 누르십시오.
2. 로 이동 앱 준비 and right click then select 속성.
3. Now set the Startup type to Automatic 클릭 스타트.
4. Click Apply followed by OK and close the services.msc window.
5. Restart your PC and you may be able to fix couldn’t complete the updates, Undoing changes error message.
Method 4: Disable Automatic Updates
1. 프레스 Windows 키 + R 다음을 입력하십시오. services.msc를 Enter를 누르십시오.
2. 로 이동 Windows Update를 setting and right click then select 속성.
3. Now click Stop and select Startup type to 사용할 수 없습니다.
4. Click Apply followed by OK and close the services.msc window.
5. Restart your PC and again try installing updates.
당신이 할 수 있는지 확인 Fix We couldn’t complete the updates, Undoing changes issue, 그렇지 않은 경우 계속합니다.
Method 5: Increase Windows System Reserved Partition Size
NOTE: If you use BitLocker, uninstall or delete it.
1. You can increase the reserved partition size manually or by this 파티션 관리자 소프트웨어.
2. 프레스 Windows 키 + X 그리고 클릭 디스크 관리.
3. Now to extend the size of Reserved Partition you must have some unallocated space or you have to create some.
4. To create it, right-click on one of your partitions (Excluding OS partition) and select 볼륨을 축소.
5. Finally, right-click on Reserved Partition 선택 볼륨을 확장합니다.
6. Restart your PC and you will be able to fix we couldn’t complete the updates, Undoing changes message.
Method 6: Run Windows 10 Update Troubleshooter
You can also solve the We couldn’t complete the updates issue by running “Windows Update troubleshooter”. This will take a few minutes and will automatically detect & fix your problem.
1. Windows 키 + I를 눌러 설정을 연 다음 업데이트 및 보안.
2. From the left-hand menu make sure to select 문제를 해결하십시오.
3. Now under Get up and running section, click on Windows Update를.
4. Once you click on it, click on “문제 해결사 실행” under Windows Update.
5. Follow on-screen instructions to run the troubleshooter and see if you’re able to Fix We couldn’t complete the updates Undoing changes issue.
Method 7: If all else fails then install the Updates Manually
1. Right-click on “이 PC"를 선택하고 속성.
2. 이제 시스템 속성, 을 체크하다 System type and see if you have a 32-bit or 64-bit OS.
3. Windows 키 + I를 눌러 설정을 연 다음 업데이트 및 보안 아이콘.
4. 아래에 Windows Update를 note down the “KB" number of the update which fails to install.
5. 다음으로 열기 Internet Explorer or Microsoft Edge 다음으로 이동 Microsoft 업데이트 카탈로그 웹 사이트.
참고 : Link only work in Internet Explorer or Edge.
6. Under the search box, type the KB number you noted in step 4.
7. 이제를 클릭하십시오 다운로드 버튼 next to the latest update for your OS type i.e. 32-bit or 64-bit.
8. Once the file is downloaded, double-click on it and follow on-screen instructions to complete the installation.
Method 8: Miscellaneous Fixes
1. 실행 CCleaner를 to fix registry issues.
2. Create a new Admin account and try installing updates from that account.
3. If you know which updates are causing problems manually download the updates 설치하십시오.
4. Delete any VPN services installed on your PC.
5. Disable Firewall and Antivirus, then again try installing the updates.
6. If nothing works, again download the Windows and then try installing the updates.
If you are not able to log on to Windows and stuck in a restart loop.
IMPORTANT: After you are able to log on to Windows try all the above-mentioned methods.
중요 면책 조항:
이는 매우 고급 튜토리얼입니다. 수행 중인 작업을 모르는 경우 실수로 PC에 손상을 입히거나 일부 단계를 잘못 수행하여 궁극적으로 PC가 Windows로 부팅되지 못하게 될 수 있습니다. 따라서 자신이 무엇을 하고 있는지 모른다면 기술자의 도움을 받거나 전문가의 감독을 받는 것이 좋습니다.
Method (i): System Restore
1. Restart your Windows 10.
2. As the system restarts enter into BIOS setup 와 configure your PC to boot from CD/DVD.
3. Insert the Windows 10 bootable installation DVD and restart your PC.
4. When prompted to Press any key to boot from CD or DVD, press any key to continue.
5. 언어 기본 설정을 선택하고 다음을 클릭합니다. 수리를 클릭하십시오 왼쪽 하단에 있는 컴퓨터.
6. On choose an options screen, click 문제를 해결하십시오.
7. On Troubleshoot screen, click 고급 옵션.
8. On Advanced options screen, click 시스템 복원.
9. Select a restore point before the current update and restore your computer.
10. When the Windows restart you won’t see we couldn’t complete the updates, Undoing changes 메시지.
11. Finally, try method 1 and then install the latest updates.
Method (ii): Delete Problematic update files
1. Restart your Windows 10.
2. As the system restarts enter into BIOS setup and configure your PC to boot from CD/DVD.
3. Insert the Windows 10 bootable installation DVD and restart your PC.
4. 메시지가 표시되면 CD 또는 DVD에서 부팅하려면 아무 키나 누르십시오, press any key to continue.
5. 언어 기본 설정을 선택하고 다음을 클릭합니다. 수리를 클릭하십시오 왼쪽 하단에 있는 컴퓨터.
6. On choose an options screen, click 문제를 해결하십시오.
7. On Troubleshoot screen, click 고급 옵션.
8. On Advanced options screen, click 명령 프롬프트를 누릅니다.
9. Type these commands in cmd and press enter after each one:
cd C:Windows
del C:WindowsSoftwareDistribution*.* /s /q
10. Close Command prompt and restart your PC. You will be able to log on to Windows normally.
Finally, try installing the update and you will be able to fix we couldn’t complete the updates, Undoing changes 에러 메시지.
Method (iii): Run SFC and DISM
1. Open Command Prompt at boot.
2. 다음 명령을 입력하고 Enter 키를 누릅니다.
Sfc / scannow
3. Let System File Check (SFC) run as it usually takes 5-15 minutes to complete.
4. Now type the following in cmd (Sequential order is important) and hit enter after each one:
a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /online /Cleanup-Image /startcomponentcleanup
d) DISM /Online /Cleanup-Image /RestoreHealth
#WARNING: This is not a fast process, component cleanup can take almost 5 hours.
5. After running DISM it is a good idea to re-run SFC / 스캔 to make sure all the issues were fixed.
6. Restart your computer and this time updates will be installed without any problem.
Method (iv): Disable Secure Boot
1. PC를 다시 시작하십시오.
2. When the system restart Enter the BIOS 설정 by pressing a key during the bootup sequence.
3. Find the Secure Boot setting, and if possible, set it to 사용함. This option is usually in either the Security tab, the Boot tab, or the Authentication tab.
#WARNING: After disabling Secure Boot it may be difficult to re-activate Secure Boot without restoring your PC to the factory state.
4. Restart your PC and update will be installed successfully without any error message we couldn’t complete the updates, Undoing changes.
5. 다시 Enable the Secure Boot option from BIOS setup.
Method (v): Delete the System Reserved partition
1. Open Command Prompt and type each of the following commands, hit enter after each one:
bcdboot C:Windows /s C: diskpart를 목록 vol select vol (Select System Volume) 행동 목록 vol select vol (Select System Reserved Volume) 비활성 출구
Configure BCD:
bcdedit /set {bootmgr} device partition=C: bcdedit /set {default} device partition=C: bcdedit /set {default} osdevice partition=C:
2. Before making any changes or rebooting, make sure that you have Windows installation DVD or WinPE/WinRE Cd or USB flash Drive in the case of Windows Boot failure. If Windows doesn’t boot, use the Windows installation disk or WinPE/WinRE to boot and at the command prompt type (How to create WinPE Bootable USB):
bootrec / FIXMBR bootrec / fixboot와 bootrec / RebuildBcd
3. Once rebooted, move WinRE from the system reserved partition to the system partition.
4. Again open Command Prompt and type the following command, hit enter after each one:
Assign a drive letter to the recovery partition in Diskpart:
diskpart를 목록 vol select vol <Recovery Volume> assign let=R Disable WinRE: 시약c / 비활성화
Remove WinRE from Reserved partition:
rd R:Recovery
Copy WinRE to System partition:
robocopy C:WindowsSystem32Recovery R:RecoveryWindowsRE WinRE.wim /copyall /dcopy:t
Configure WinRE:
reagentc /setreimage /path C:RecoveryWindowsRE
Enable WinRE:
시약 / 활성화
5. For future use, create a new partition at the end of the drive (after the OS partition) and store WinRE and an OSI folder (Original System Installation) which contains all files contained within the Windows 10 DVD. Please make sure that you have enough free space on your hard disk to create this partition drive (usually 100GB). And if you choose to make this partition, it’s important that you set the partition ID flag to 27 (0x27) using Diskpart, as it specifies that it is a Recovery partition.
당신을 위해 추천 된:
If nothing works then Restore your PC to an earlier time, delete the problematic update from Control Panel, disable the automatic updates and use your PC normally till Microsoft work towards fixing this update problem. In a few days probably 20-30 days try installing the updates again, if successful congratulations but if you are again stuck, then try the above methods, and this time you may succeed.
That’s it you have successfully fix We couldn’t complete the updates, Undoing changes. Don’t turn off your computer issue and if you still have any queries regarding this update please feel to ask them in comments.